본 연구에서는 현장 작업자 개인이 느끼는 심리/환경적 부하를 정량적으로 파악할 수 있는 척도를 개발하였다. 이러한 척도는 현장의 중간관리자들이 간단한 기구와 직접 관찰을 통해 쉽게 사용할 수 있도록 설계되었다. 심리적 작업부하 측정은 기존 연구와 현장 작업자를 대상으로 한 인터뷰 결과를 바탕으로, 타당도가 높다고 인정되는 심리부하 측정 요소를 결정하였고, 문헌과 모의 검사를 통하여 부 담감이나 편의(bias)를 줄일 수 있도록 문항수 및 어휘를 선택하였으며, 각각의 설문은 다양한 문체 중 가장 신뢰도가 높은 형태를 선정하였다. 환경적 작업부하 측정은 문헌 조사를 통하여 측정을 위한 요소를 결덩하였고, KS 규격을 기존으로 새로운 환경부하 측정 지침서를 개발하였고, 현장 예비조사가 실시되었다. 또한, 환경부하 측정결과를 지수화하기 위한 수리적 모델과, 심리적척도와의 통합을 위 한 수리적 방법론이 제시되었다. 이러한 설문 문항과 환경조사방법은 작업장을 대상으로 적용하여 실 제로 그 효용성 여부를 검토하였다. 연구 결과 이제까지 소홀히 여겨왔던 작업자의 심리적/환경적 부 하를 정량적으로 간편하게 측정할 수 있는 방법이 개발되었고, 정량화한 심리/환경 부하 척도는 이제 까지 주로 조사되었던 생체역학적/생리적 부담도와 더불어 종합적인 작업부하 평가에 일익을 담당할 것으로 예상된다. 또한, 이러한 척도에 의한 결과는 현장 근로자들의 근로여건 개선을 위하여 노/사/ 정부 모두가 만족할 수 있는 객관적 자료로 사용될 수 있으며, 예방차원의 안전관리에도 응용될 수 있 을 것으로 기대한다.구로 신체의 종합적인 만족도, 선호를 취급하고 있을 뿐 신체각 부위의 만족 도나 선호에 관한 자세한 고찰을 하고 있지 않으며 자신의 신체에 대한 인식도 및 실제체형과의 비교는 이루어지고 있지 않다. 이에, 신체 각 부위에 대한 인식도 및 실제 신체 측정치와 만족도와의 관계 및 이상형에 대해 구체적으로 파악할 필요가 있다. 또한, 신체에 대한 이상형은 시대의 여러 여건에 따라서 변화할 수 있으므로 의복 착용자가 의복을 통해서 표현하고자 하는 이상형의 시대적 변화를 살펴볼 필요가 있다. 따라서 본 연구에서는 신체에 대한 인식도 및 만족도, 이상형에 대한 설문지 조사와 신체측정을 통하여 신체 크기에대한 만족도를 객관적인 척도로 고찰하고, 이상형과 실제 체형에 관하여 고찰하고자 한다. 도한, 1992년도 자료와의 비교를 통하여 시대에 따른 신체만족도와 이상형의 변화를 파악하고자 한다. 이를 기초로 한 의복원형 제작 및 의복 디자인에 대한 연구를 통해 의복의 맞음새가 좋을뿐만 아니라 의복착용자들 에게 심리적 만족을 줄 수 있는 의복 제작에 도움이 될 수 있을 것이다.적입지로 분석되었다.등 다양한 모형들을 고려해 본 뒤, 적절한 모형을 적용할 것이다. 가로망 설계 모형에서 신호제어를 고려하기 위해서는 주어진 가로망에 대한 통행 배정과정에서 고려되는 통행시간을 링크통행시간과 교차로 지체시간을 동시에 고려해야 하는데, 이러한 문제의 해결을 위해서 최근 활발히 논의되고 있는 교차로에서의 신호제어에 대응하는 통행배정 모형을 도입하여 고려하고자 한다. 이를 위해서 지금까지 연구되어온 Global
요통(Lowback Pain)을 유발하는 주요원인으로 알려져있는 MMH(Manual Materials Handling) 작업에 있어서 작업조건의 변화가 근육의 활동과 피로도에 미치는 영향을 평가하기 위해 4가지 서로 다른 작업조건하에서 몸통부위(Trunk)의 주요근육에 대한 EMG 파형분석을 실시 하였다. 본 연구에서의 분석대항작업은 실제 작업조건과 유사하레 설계된 120분간의 단속적인 인양(Lifting)/하역(Lowering) 작업으로서 작업중량은 작업자의 MVIS(Maximum Voluntary Isometric Strength)를 기준으로 설정되었으며, 매 10분 간격으로 EMG 측정이 이루어졌다. 작업물이 작업자의 정면에 위치한 대칭형(Symmetric) 작업의 경우 배면부(Dorsal) 근육인 천극근(Erector Spinae)과 활배근(Latissimus Dorsi)이 활동근(Active Muscle)인 것으로 나타났으며, 정중면(Medial Plane)을 중심으로 좌우측 근육이 동일한 근력을 발휘하였다. 작업물이 작업자의 한쪽 측면에 위치한 90도 비대칭형(Asymmetric) 작업의 경우 천극근과 활배근외에 작업물과 반대쪽 외사근(External Oblique)이 활동근으로 추가되었으며, 작업물과 반대쪽의 근육들이 더욱 큰 근력을 발휘하였다. 작업의 반복에 따른 근육의 피로도를 평가하기 위해 실시한 EMG 파형의 Spectral Analysis 결과, 비대칭형 작업시 작업물과 반대쪽의 천극근에서 작업시간의 경과에 따라 중위주파수(Median Power Frequency)가 저주 파수대로 천이(Lower Shift)하는 현상이 나타났으며, 일정한 작업량이라도 작업중량을 줄이고 작업 빈도를 높여서 작업할 경우에 이러한 현상이 더욱 두드러졌다. 작업시간의 경과에 따른 MVIS의 감소 현상은 작업빈도가 높고 비대칭형 작업일 때 가장 크게 나타났다. 총손실을 줄이고, 상대적 비용절감효과를 갖게할 수 있다고 하였다. 따라서 본 연구에서는 성인 여성기성복의 치수적합성을 높이기위하여 출산 후 중년에 접어 들면서 체형이 변화되는 것을 고려하여 연령을 분류하고(18세-34세, 30세-51세), 각 연령 집단에 따른 체형을 각각 3가지로 분류하였다. 이에 따라 의복 생산시의 총손실을 줄이기위한 상의, 하의생산시 필요한 부위별 최적규격치 간격을 제시하였다.적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를
The purpose of this study was to find out apparel fit satisfaction according to item(jacket, pants, skirt) by body perception and body satisfaction. This research was done by a survey method. Descriptive Statistics, Pearson's Correlation, Crosstabs were used for data analysis. The results of this study are as follows. 1) Correlation between body perception and body satisfaction : The subjects were less satisfied with larger or thicker girth of upper body. The subjects were less satisfied with thicker upper arm, lower arm, waist and lower abdomen. The subjects were more satisfied with taller height. The subjects were less satisfied with larger or thicker girth of lower body. The subjects were less satisfied with thicker hips. thighs, calves, ankles, and longer crotch length. However, they were more satisfied with longer legs. 2) Apparel fit by body perception and body satisfaction: The subjects who were less satisfied with thicker upper arm, waist, thighs and wider hips were less satisfied with the upper arm area, waist area. hip area of jacket. The subjects who were more satisfied with longer arms were more satisfied with the sleeve length of jacket. The subjects who were less satisfied with wider shoulder width were less satisfied with the upper back width of jacket. It means the shoulder width affected more the upper back width of jacket than shoulder width of jacket. The subjects who were less satisfied with wider hips were less satisfied with the hip area of pants and skirt. The subjects who were less satisfied with thicker thighs were less satisfied with the thigh area and the hip area of pants and skirt. The subjects who were less satisfied with longer crotch length were less satisfied with the crotch length of pants. 3) Difference between actual body and perceived body by Rohrer Index: Rohrer Index 109 calculated by average of the ideal height(165.83cm) and weight(49.78kg) of the subjects ranged in thin body type(below 120). The subjects tended to perceived their bodies fatter than their actual bodies. Also, the subjects tended to perceived their lower bodies fatter than upper bodies.
This study conducted a questionnaire survey on diet behavior in male and female university students in Cheongju area and examined the behavioral characteristics related to diets such as body type awareness degree, actual weight and height, diet experience, and side effects. The desired average weight of male students was 68.81kg, which was 6.42% less than the current average weight of 73.53kg. The desired weight of female students was 49.15kg, which was 9.95% lower than the current average weight of 54.58kg. There was a significant difference between male and female groups in all questions on diet characteristics (p<0.05, p<0.01, p<0.001). Looking at the result of this study, it is necessary to provide accurate nutrition knowledge and proper education and counseling programs so that university students who desire to have a slimmer body shape that have highly dissatisfied view on their weight can maintain their healthy life through desirable weight management.
Journal of the Korea Fashion and Costume Design Association
/
v.16
no.3
/
pp.1-13
/
2014
This study investigated body type among women in their 20s and the development of prototypes for tailored jackets by body type in order to design clothes in consideration of an imbalance in body type caused by the popularity of portable devices such as smartphones and Netbooks. This study aims to create a design of jacket patterns by body type through both actual and virtual wear testing among women in their 20s, who are the major consumer of ready-made clothes and are very sensitive to size fit. This study will provide pattern information for the manufacture of jackets with a goal of securing the latest scientific body type information and establish the grounds for a research method in the manufacture of clothes. According to actual and virtual wear tests of four different body types, a significant difference was found in armhole circumference in most types because it was scanned with the arms slightly apart to prevent the armhole area from being missed during the 3D scanning. This has resulted in a slight distortion in measurements. To correct this problem, it is necessary to verify the precision of the body scanner and its program. In categories in which a large significant difference was found, it is necessary to test them against many subjects. In addition, it would be required to perform a further study on the 3D virtual wear system, which could be useful in the clothing industry.
Park, Seong-Yong;Yoon, Byung-Man;Lee, Seung-Hwi;Kim, Seo-Jun
Proceedings of the Korea Water Resources Association Conference
/
2007.05a
/
pp.527-531
/
2007
하천내에서 작은 물고기의 국지적인 회유 또는 이동 습성은 먹이를 구하고, 산란 및 성장과 집단에서 분산하고, 위험으로부터 도피하는 것에 밀접한 연관이 있다. 하천의 합류부와 연결부에 제방(levee), 도로(road) 등이 설치되는 경우 일반적으로 암거형태의 인공수로로 상 하류를 연결되는데, 암거내 수리특성상 평수시 저유량, 고유속, 저수심의 수리특성을 보인다. 이러한 수리특성은 물고기가 이동하는데 장애(barrier)가 되어 생태적으로 하천내 종다양성 감소와 일부 어종의 멸종을 초래한다. 어도 설치시 설계기준에서 가장 주목할 부분은 어도를 이용할 대상어종의 범위와 유영능력이다. 하천설계기준(2005, 한국수자원학회)에서 제시된 물고기의 유영능력은 대부분 국외 어종을 대상으로 외국에서 실험한 결과를 이용하고 있다. 그러므로 이러한 기준이 국내 어종에 대해 적합한지에 대한 검토가 필요하다. 본 실험의 목적은 국지회유성인 피라미와 각시붕어가 인공수로를 통과할 때의 유영행동 중 소상성공율과 유영속력을 평가하고자 함이다. 유영행동의 실험방법은 Brett(1967)에 의해 제안된 2가지 방법인 증진유속방법과 고정유속 방법중에서 물고기의 이동경로와 소상능력을 확인하기에 용이한 고정유속방법을 사용하였다. 또한, 효과적인 실험을 위해 실험어종(피라미 100마리, 각시붕어 100마리)이 실험 중에 최적의 건강상태를 유지할 수 있도록 물고기의 적응 기간(24시간)과 실험 중 휴식기간을 두었다. 실험결과 체형이 방추형(fujiform)인 피라미의 경우 평균유속 $0.7{\sim}0.8m/s$구간에서 소상성공율이 61%에서 26%로 급격하게 하락하는 현상이 나타났다. 그리고 측편형(compressiform)의 체형을 가진 각시붕어의 경우 평균유속 0.4m/s에서 소상성공율이 25%로 나타났으며 그 이상의 유속에서는 10%이하로 나타났다. 실험어종의 이동경로를 분석한 결과 대부분 수로바닥에 밀착하여 최저유속구간을 이용하여 이동하는 것으로 나타났으며, 이동경로의 지점유속은 평균 유속의 70%정도로 나타났다. 실제 하천에 설치된 인공수로가 생태통로의 기능을 유지하기 위해서는 평상시 수리특성이 대상어종의 유영능력을 초과하지 않도록 설계되어야 한다. 특히, 하천에 설치된 인공수로의 길이가 $5{\sim}10m$정도일 경우라면 피라미의 소상 가능성을 50% 이상 확보하기 위해서는 평수시 설계유속이 0.7m/s를 초과하지 않아야 할 것으로 판단된다.
Journal of the Korean Society of Clothing and Textiles
/
v.27
no.1
/
pp.18-28
/
2003
The purpose of this study is to provide total data of real body-type and self-evaluation about it. The subjects were 614 middle-aged women between 35 and 59 years old. Data were collected through measurement and a questionnaire survey on self-evaluation. The results of self-evaluation of body are as follows; 1. As the result of the recognition degree analysis, people consider themselves thicker, shorter or smaller than what they really we, regardless of ages and types. In addition, the women of younger group rather than the women of older group consider themselves bigger/thicker and shorter than what they really are. They think that the items of waist girth, abdominal girth, hip girth, upper arm girth. and thigh girth are thicker than the other items, however, among girth items the size of bust girth is smaller than the other items. The women of the late middle-aged group consider their somatotype thicker/bigger and shorter than the women of the early middle-aged group do. 2. As the result of body cathexis for each part, women in general rum out themselves not to be satisfied with their body parts, regardless of ages and types. Particularly, they are not satisfied with abdominal girth, weight, hip girth. According to the age bracket, the women in the older group are more satisfied than the women of younger group in terms of their body. According to somatotype, women in tall and slim groups are more satisfied with their body. The women of the early middle-aged group turn out not to be satisfied with girth items while the women of the late middle-aged group are not satisfied with length items.
Journal of the Institute of Convergence Signal Processing
/
v.14
no.4
/
pp.235-242
/
2013
In this paper, the system which can translate sign language through motion recognition of Kinect camera system is developed for the communication between hearing-impaired person or language disability, and normal person. The proposed algorithm which can translate sign language is developed by using core function of Kinect, and two ways such as length normalization and elbow normalization are introduced to improve accuracy of translating sign langauge for various sign language users. After that the sign language data is compared by chart in order to know how effective these ways of normalization. The accuracy of this program is demonstrated by entering 10 databases and translating sign languages ranging from simple signs to complex signs. In addition, the reliability of translating sign language is improved by applying this program to people who have various body shapes and fixing measure errors in body shapes.
Journal of the Korea Society of Computer and Information
/
v.25
no.5
/
pp.107-116
/
2020
The purpose of this study was to compare the pattern of two men's pants for education and two for industry, and to analyze the patterning method that is most suitable for the body shape of middle-aged men. As a result of appearance evaluation for 3D simulation, J pattern was evaluated as the best in most items, and H pattern was analyzed to be the most inappropriate. As a result of measuring the airgap, all four patterns of the waist circumference were evaluated to have very small airgap, and the J pattern had the smallest airgap for the pants. J pattern was analyzed as the most suitable pattern for middle-aged men's body shape by synthesizing the appearance evaluation of virtual wear, color distribution, sectional view, airgap, etc. However, in the case of J pattern, it was analyzed that the pants length needs to be modified. Since this study compared and analyzed only two patterns for education and two for industry, it is thought that the development of pants for middle-aged men should be developed through actual wearing experiments with J patterns.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2015.05a
/
pp.567-568
/
2015
인터넷이 활성화 되면서 웹기반 교육으로 e-Training이 발전되었다. e-Training은 업무에 필요한 수행능력을 습득 향상 시키기 위하여 정보통신 기술, 장비, 환경을 활용하여 실시하는 교육훈련이다. e-Training에 포함되는 기술에는 시뮬레이션, 3D 가상현실, 증강현실 등이 있다. 본 연구에서는 가상현실 기반의 디젤엔진훈련 시뮬레이션을 개발하였다. 제안한 시스템은 3차원 디스플레이 시스템을 통해 몰입감과 상호작용 교육훈련방식을 도입하여 3D입체형 화면안의 시야가 실제 현실과 같은 몰입의 효과가 있으며 엔진부품의 이름과 기능 등을 게임화를 통해 교육 훈련하는 시스템으로써 시뮬레이션을 통해 필요한 문제풀이를 재미있게 할 수 있어 학습능률에 효과가 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.