• Korean Management Science Review
• /
• v.1
• /
• pp.26-34
• /
• 1984

한국적 경영환경에서 O.R 기법을 경영활동에 적용하는 데에는 O.R의 이론적 측면보다 실용화가 더욱 어려운 실정이다. 관리자들이 편견과 자기 경험의 노예 상태에서 직관적으로 의사결정을 한다던가, 이노베이션에 대한 거부 반응이 거세다던가, 시스템 의식이 미약하다던가, 데이터의 축적이 빈곤하다던가 하는 따위 등이 O.R의 실용화에 장애요인으로 작용된다. 이 글은 쌍용양회공업주식회사에서 광산 조업활용에 적용하여 성공적으로 활용되고 있는 O.R의 모델을 간추린 것이다. 이 회사에서는 7년여에 걸쳐 MIS의 추진과정을 통해 관리자들이 컴퓨터시스템 마인드를 제고시키고, 정보시스템을 설계하고, 정보시스템을 개발하고, 정보시스템을 활용하면서 데이터를 축적하여 O.R기법을 실제에 적용하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.4
• /
• pp.346-353
• /
• 2010

Hydrogen fueled vehicle was evaluated as one of the next-generation technology that will be able to solve the global warming, depletion of fossil fuel and etc. The practical use of hydrogen fueled vehicle, nevertheless, is being delayed more than expected schedule due to various causes. In order to promote the dissemination of hydrogen fueled vehicle, development status and obstacle factors of practical use for hydrogen fueled vehicles were reviewed and the strategy plans for dissemination promotion were proposed. Hydrogen fueled vehicles are included the hydrogen fuel cell, neat and enriched hydrogen fueled engines. The technicalness, economy, safety, cognizance, system, support and etc were considered in the strategy plans.

• Journal of Embryo Transfer
• /
• v.9 no.1
• /
• pp.31-41
• /
• 1994

핵 이식 기술을 이용한 cloning 송아지 생산이 처음 보고(Prather et al., 1987) 된 후, 소 수정란 Cloning에 대한 많은 연구가 분자 생물학 등 여러 분야에서 꾸준히 계속되고 있다. 이 기술은 빈우의 번식 능력을 향상시켜 유전적 개량량을 증대할 수 있는 번식과 육종을 위한 도구로써 많은 잠재력을 지니고 있다. 최근 핵 이식 기술을 이용하여 유전적으로 우수한 빈우로부터 수천개의 수정란을 생산하여, 이들 수정란에게 생산된 송아지가 번식 축군으로 공시되어 있으므로, 그 결과가 주목되나 아직까지는 비용이 많이 들고 송아지 생산 효율이 저조하므로, 가까운 장래에 일반 양축가에 이용될 가능성이 낮다. 그러나 이 기술의 실용화를 위하여 선결되어야 할 많은 문제점들 중, 지난 몇 년 동안 많은 연구기관에서 수행된 활발한 연구의 결실로써, 난포란 제핵, cell fusion 과 oocyte activation의 방법등 주요 장애 요인들이 점차 극복되면서 실용화를 위한 접근이 예견되어지며, 구미의 일부 개량 기관에서는 이를 상업화 하기 위한 여건을 다지고 있다. 그러므로 이 Review에서는 fllicular dynamics, 난포란의 성숙, cell cycle, 난포란 제핵, cell fusion과 oocyte activation, 이식후 핵의 remodeling과 reprogramming에 대한 현재까지의 보고된 자료를 기초로 그 기본 원리를 재고하는데 초점을 맞추었다.

• Solar Energy
• /
• v.10 no.2
• /
• pp.18-27
• /
• 1990

The hot water producer by the combination of the solar thermal energy and freon gas compression heat has been developed. Freon R-12 gas was circulated through the system including the solar absorption panel, which has no glassing and no insulation, and the frozen and burst problems were intrinsically eliminated. The manufacturing and running costs may go further down than the regular solar hot water systems.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.222-223
• /
• 1997

By analyzing the successful innovation case of potato microtuber mass production technology, a representative case of technology-push type creative innovation in an imitation oriented research culture, this paper attempts to figure out conceptual model of creative innovation that is initiated by the public laboratories in catching-up country, Stages of creative innovation can be divided into the internal R&D stage and the external commercialization stage. Success of the internal R&D stage depended on autonomy to secure creative research idea and commitment of individual researchers. Psychological pressure evoked from sportlights of mass media and commitment of sponsor increased the intensity of research efforts of the researcher Recognition of research problem and its significance was intensified by site visits of agricultural fields, and the recognized higher impacts of expected research results and knowledge creation achieved were a fundamental source of self-motivation. In the stage of commercialization stage, various legal, socio-economic, and psychological barriers were confronted. In a catching-up country lacking of experiences of creative innovation, creative innovation process can be regarded as a barrier elimination and cultural revolution process. Among the barriers, psychological refusal of farmers to corn-sized potato seeds was critical, which finally enforced to further researches to enlarge the size of potato seeds. In addition, the researcher has concentrated his research efforts in one specialized research area by getting a series of similar research project funds rather than diversification. It was lucky for him to have a chance to carry out a series of similar researches in one research area during the last 10 years. In getting research funds from government and private companies continuously in one research area, both internal and external promoters played significant roles.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.203-207
• /
• 2000

The sensitivity of ISFET glucose sensor is improved by employing amperometric actuation method. However, this method takes long time to recover the primary output voltage after measurement because of slow migration of the hydrogen ion between internal and external sensing membranes. Consequently, such a recovery-time delaying problem is one of obstacles to a practical use. In this paper, a new method is proposed to control the concentration of hydrogen ion in internal membrane, which applies a reduction potential to the working electrode for supplying hydroxide ion. Experimental results show that the recovery-time was reduced within 2 minute against decades minute of conventional method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.47-54
• /
• 2008

Cost reduction requires lowering number of power devices used in the converter driving SRM. This is quite feasible in SRM drive systems than in other drive systems. This paper deals with analysis and simulation of a novel two phase SRM. A novel two phase SRM has high performance, self-starling capability, high efficiency, and low manufacturing cost. Additionally, the stator back iron does not experience any flux reversal as the flux is in the same direction whether phase A or B is excited leading to a greater reduction in core losses. The magnetic analysis and design considerations of the novel two phase SRM have been obtained by the finite element analysis (FEM).

• Journal of Internet Computing and Services
• /
• v.21 no.1
• /
• pp.17-31
• /
• 2020

With the rapid development of block chain technology, attempts have been made to put the block chain technology into practical use in various fields such as finance and logistics, and also in the public sector where data integrity is very important. Defense Operations In addition, strengthening security and ensuring complete integrity of the command communication network is crucial for operational operation under the network-centered operational environment (NCOE). For this purpose, it is necessary to construct a command communication network applying the block chain network. However, the block chain technology up to now can not solve the security issues such as the 51% attack. In particular, the Practical Byzantine fault tolerance (PBFT) algorithm which is now widely used in blockchain, does not have a penalty factor for nodes that behave maliciously, and there is a problem of failure to make a consensus even if malicious nodes are more than 33% of all nodes. In this paper, we propose a Adaptive Consensus Bound PBFT (ACB-PBFT) algorithm that incorporates a penalty mechanism for anomalous behavior by combining the Trust model to improve the security of the PBFT, which is the main agreement algorithm of the blockchain.

• 재활복지
• /
• v.18 no.4
• /
• pp.221-235
• /
• 2014

Recently, the frequency of stroke disease is increased due to the rapid aging population, and is contributed to the major occurrence factors of the posteriori acquired disability. This study is about an postural change device for the control of supine posture which is an assisted equipment using in daily rehabilitation process for overcoming the disability by the aftereffects of the stoke disease. In this paper, the existing domestic and Japan postural appliances is examined and its comparison and categorization is performed according to its functions and purposes. Here, in order to control the supine posture state, the design method for advanced multi functional system is proposed, which is devised to have an unified mattress control operations of combining the bedsore prevention tube with the supine posture tilting tube. And also, in addition of an smart function, it is designed to enable to perform an RF functions such as the monitoring of the present device state, the alteration of the basic position and the control of alternative floating and supine posture. This system control hardware consists of three main parts : the sensor detection part, the motor driving /control part, and the system control part for bluetooth communication. In results, we confirmed that the system designed by this research is possible to make it practical as an advanced smart postural change device combined by IoT technology in the application field of the recent IT technology.