• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.149-156
• /
• 2013

In this paper, Commercial program, STAR-CCM+, was used for computer simulation. And also Multi Inner Stage(MIS) cyclone which especially designed for the real experiments of particle removal efficiency. Under negative pressure condition of outlet, computer simulation was performed to predict the removal efficiency for $5{\mu}m$ and $10{\mu}m$ particles by using a turbulence model and lagrangian method. The simulation results are 55.7% and 64.1% for $5{\mu}m$ and $10{\mu}m$ particles, respectively. To compare the simulation results with the actual test of MIS cyclone, we generated the $SiO_2$ particles by heat reactor. Although removal efficiency of actual tests is 63~76% at different flow rate, the size of $SiO_2$ particles which confirmed by SEM(scanning electron microscope) and WAPS(wide range aerosol particle spectrometer) is too small(15~30nm) to compare each results. And so the alternative experiments were performed by using commercial alumina particles ($5{\mu}m$, $10{\mu}m$ and $20{\mu}m$). It was shown that the actual removal efficiency, 76~95%, from MIS cyclone is higher than simulated one.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.114-122
• /
• 2018

This study presents the emergency assessment method about seismic safety of cable-supported bridges using seismic acceleration sensors installed on the primary structural elements of them. The structural models of bridges are updated iteratively to make their dynamic characteristics to be similar to those of real bridges based on the comparison of their natural frequencies with those of real bridges estimated from acceleration data measured at ordinary times by the seismic acceleration sensor. The displacement at the location of each seismic acceleration sensor is derived by seismic analysis using design earthquake, and the peak value of them is determined as the disaster management criteria in advance. The displacement time history is calculated by the double integration of the acceleration time history which is recorded at each seismic acceleration sensor and filtered by high cut(low pass) and low cut(high pass) filters. Finally, the seismic safety is evaluated by the comparison of the peak value in calculated displacement time history with the disaster management criteria determined in advance. The applicability of proposed methodology is verified by performing the seismic safety assessment of 12 cable-supported bridges using the acceleration data recorded during Gyeongju earthquake.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.523-535
• /
• 2008

A simulated rainfall system was built, and the unsaturated characteristics were examined by execution of simulated rainfall system test and soil water characteristic curve cell test(SWCC Cell Test) under the various rainfall and slope conditions. With the results, the applicability of infiltration behavior under rainfall and soil water characteristic curve models to the unsaturated weathered granite soil was examined. At the results of comparison the volumetric water content and matric suction measured in the wetting process(under rainfall) with those in the drying process(leaving as it was) of the simulated rainfall system, the volumetric water content showed a difference of $2{\sim}5%$ and matric suction of about $3{\sim}10\;kPa$, indicating the occurrence of hysteresis. In addition, the difference was relatively larger in matric suction than in the volumetric water content, and this tells that the hysteresis behavior is larger in matric suction. When the soil water characteristic curve derived from measurements in simulated rainfall system test were compared with those from the soil water characteristic curve cell test, both methods produced soil water characteristic curves close each other in the wetting process and the drying process, but in both, there was a difference between results obtained from in the wetting process and those from in the drying process. Thus, when soil water characteristic curves are rationally applied to the design and stability analysis considering of the properties of unsaturated soil, it is considered desirable to apply the soil water characteristic curve of the wetting process to the wetting process, and that of the drying process to the drying process.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.125-137
• /
• 2013

Global warming and climate change have influence on abnormal weather pattern and the rainstorm has a localized and intensive tendency in Korea. IPCC(2007) also reported the rainstorm and typhoon will be more and more stronger due to temperature increase during the 21st century. Flood Estimation Handbook(Institute of Hydrology, 1999) published in United Kingdom, in the case that the data period is shorter than return period, recommends the regional frequency analysis rather than point frequency analysis. This study uses Regional Climate Model(RCM) of Korea Meteorological Administration(KMA) for obtaining the rainfall and for performing the regional frequency analysis. We used the rainfall data from 58 stations managed by KMA and used L-moment algorithm suggested by Hosking and wallis(1993) for the regional frequency analysis considering the climate change. As the results, in most stations, the rainfall amounts in frequencies have an increasing tendency except for some stations. According to the A1B scenario, design rainfall is increased by 7~10% compared with the reference period(1970-2010).

• Journal of Nutrition and Health
• /
• v.52 no.6
• /
• pp.552-558
• /
• 2019

Purpose: Although vitamin D deficiency is common among Korean adolescent girls and young women, few studies have explored the potential health effects of vitamin D deficiency in this vulnerable population. This study examined the association between vitamin D deficiency and anemia in Korean adolescent girls and young women. Methods: The data from the Korea National Health and Nutrition Examination Survey 2008 ~ 2014 were used. A total of 3,643 girls and adult women aged 12 to 29 who provided all the information (including serum 25-hydroxy vitamin D, hemoglobin, and/or serum ferritin) needed for the analysis were included in the analysis. Demographic, lifestyle, and health data were obtained through survey questionnaires. Anemia and iron deficiency anemia were defined according to the World Health Organization cut-offs. Multivariable logistic regression, and restricted cubic spline regression were used in the analysis. Results: In fully adjusted logistic regression models, the vitamin D deficiency was significantly associated with higher prevalences of anemia (odds ratio (OR): 1.61, 95% confidence interval (CI): 1.04 ~ 2.49) and iron deficiency anemia (OR: 1.43, 95% CI: 1.01 ~ 2.03). In a cubic spline regression model, we observed a dose-response relationship between serum 25(OH)D concentration and anemia, and this linear relationship was also clearly observed between serum 25(OH)D concentration and iron deficiency anemia. Conclusion: Vitamin D deficiency may be associated with a higher prevalence of iron deficiency anemia and anemia in adolescent girls and young women. Alternatively, vitamin D deficiency may be a concurrent event for patients with anemia, which we cannot distinguish in this cross-sectional study. Further studies are needed to verify the causality in this population of low vitamin D levels.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.211-216
• /
• 2016

Worldwide casualties caused by earthquakes, floods, fire or other disaster has been increasing. So many researchers are being actively done technical studies to ensure golden-time. In this paper if a disaster occurs, use the IoT technologies in order to secure golden-time and transmits the message after to find the user of the accident area first. When the previous job is finished, gradually finds a user of the surrounding area and transmits the message. For national emergency information, OPEN API of Korea Meteorological Administration was used. To collect detailed information on a relevant area in real time, this study established the system that connects and integrates Crowd Sensing technology with BLE (Bluetooth Low Energy) Beacon technology. Up to now, the CBS based on base station has been applied. However, this study designed and mapped DB in the integration of Beacon based user positioning and national administrative address system in order to estimate local users. In this experiment, the accuracy and speed of information dif6fusion algorithm were measured with a rise in the number of users. The experiments were conducted in a manner that increases the number of users by one thousand and was measured the accuracy and speed of the message spread transfer algorithm. Finally, became operational in less than one second in 20,000 users, it was confirmed that the notification message is sent.

• Journal of The Korean Association For Science Education
• /
• v.41 no.6
• /
• pp.519-531
• /
• 2021

This study investigates the science teacher identity of pre-service science teachers (PSTs) in the context of a teaching practice course. Twenty-two PSTs who took the 'Biological Science Lab. for Inquiry Learning' course at the College of Education participated in this study. Artifacts created during the course were collected, and the teaching practices and reflections were recorded and transcribed. In addition, semi-structured interviews were conducted with nine PSTs, recorded, and transcribed. We found the science teacher identity was not well revealed at the beginning of the course. Authoritative discourse appeared in the early oral reflections of PSTs, indicating that the PSTs perceived oral reflection activities as 'evaluation activities for teaching practice'. This perception shows that pre-service teachers participate in teaching practice courses as students attending a university, performing tasks and receiving evaluations from instructors. After the middle of the course, discourses showing the science teacher identity of the PSTs were observed. In the oral reflection after the middle part, dialogic discourses often arose, showing that the PSTs perceive the oral reflection activities as a 'learning activity for professional development'. In addition, in the second half, discourse appeared to connect and interpret one's experience with the teacher's activity, indicating that the PSTs perceive themselves as teachers at this stage. In addition, the perception of experimental classes was expanded through the course. During the course, the practice of equalizing the authority of the participants, providing a role model for reflection, and experiencing various positions from multiple viewpoints in the class had a positive effect on the formation and continuation of the teacher identity. This study provides implications on the teacher education process for teacher identity formation in PSTs.

• Explosives and Blasting
• /
• v.36 no.4
• /
• pp.35-47
• /
• 2018

In this study, several concrete-block blast tests and AUTODYN numerical analyses were conducted to analyze the effects of different stemming and coupling materials on explosion results. Air, sand, and polymer gel were used as both the stemming and coupling materials. The stemming and coupling effects of these materials were compared with those of the full-charge condition. Soil-covered or buried concrete blocks were used for field crater tests. It was found from the concrete block tests and numerical analyses that both the crater size and the peak pressure around the blast hole were higher when the polymer gel was used than when the sand and the decoupling condition were used. The numerical analyses revealed the same trend as those of the field tests. Pressure peaks in concrete block models were calculated to be 37, 30, and 16 MPa, respectively, for the cases of the polymer gel, sand, and no stemming and decoupling condition. The pressure peak was 52 MPa in the case of full-charge condition, which was the highest pressure. But the damage area for the case was smaller than that obtained from the use of polymer gel. Full-charge was also used as a reference test.

• Management & Information Systems Review
• /
• v.37 no.4
• /
• pp.109-123
• /
• 2018

Emotional labor is now emphasized as a very important concept not only for private companies but also for public servants who perform public affairs in public institutions, but relatively theoretical research is lacking. The purpose of this study is to examine the negative effects of the surface acting on emotional labor and to examine the moderating effect of social support to reduce it. As for the social support, we distinguished between POS support and supervisor support. Furthermore, we found that any support among POS and supervisor support has a large effect on the relationship between surface acting and emotional exhaustion. In order to verify this research model and hypothesis, we conducted 250 employees who perform civil affairs in public institutions. The results of this study are summarized as follows. First, it was found that surface acting had a very significant effect on emotional exhaustion. The increase in emotional exhaustion due to the incongruity between inner emotions and display emotions appeared to be the same as the results of research on existing private companies. Second, both POS and supervisor support significantly reduce the relationship between surface acting and emotional exhaustion. Third, the moderating effect of POS and supervisor support showed that the control effect of superiors' support was stronger, so that the surface act reduced the influence of emotional exhaustion more strongly. The results of this study refer to the importance of emotional labor education for civil servants performing civil affairs. In addition, it suggests that various programs should be provided to relieve emotional exhaustion and stress of civil service officials. In addition, it suggests a more aggressive organizational support design for high-level POS.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.4
• /
• pp.25-31
• /
• 2011

In this study, the experimental design methodology was applied to optimize 1,4-dioxane treatment in E-beam process. Main factor was mathematically described as a function of parameters 1,4-dioxane removal efficiencies(%), TOC removal efficiencies(%) modeled by the use of the central composite design(CCD) method among the response surface methodology(RSM). Concentration of 1,4-dioxane is designated as "$x_1$" and Irradiation intensity is designated as "$x_2$". The regression equation in coded unit between the 1,4-dioxane concentration and removal efficiencies(%) was $y=71.00-10.85x_1+20.67x_2+{1.53x_1}^2-{7.92x_2}^2-1.23x_1x_2$. The regression equation in coded unit between the 1,4-dioxane concentration and TOC removal efficiencies(%) was $y=44.48-13.25x_1+9.54x_2+{5.43x_1}^2-{1.35x_2}^2+4.45x_1x_2$. The model predictions agreed well with the experimentally observed results $R^2$(Adj) over 90%. Toxicity test using algae Pseudokirchneriella Subcapitata showed that the inhibition was reduced according to increasing an E-beam irradiation.