• Journal of the Korean Society of Radiology
• /
• v.6 no.4
• /
• pp.281-290
• /
• 2012

The difference of radiation dose of MDCT due to different protocols between hospitals was analyzed by CTDI, DLP, the number of Slice and the number of DLP/Slice in 30 cases of the head, the abdomen and the chest that have 10 cases each from MDCT examination of the department of diagnostic imaging of three general hospitals in Gyeongsangbuk-do. The difference of image quality, CTDI, DLP, radiation dose in the eye and radiation dose in thyroid was analyzed after both helical scan and normal scan for head CT were performed because a protocol of head CT is relatively simple and head CT is the most frequent case. Head CT was significantly higher in two-thirds of hospitals compared to A hospital that does not exceed a CTDI diagnostic reference level (IAEA 50mGy, Korea 60mGy) (p<0.001). DLP was higher in one-third of hospitals than a diagnostic reference level of IAEA 1,050mGy.cm and Korea 1,000mGy.cm and two-thirds exceeded the recommendation of Korea and those were significantly higher than A hospital that does not exceed a diagnostic reference level (p<0.001). Abdomen CT showed 119mGy that was higher than a diagnostic reference level of IAEA 25mGy and Korea 20mGy in one-third. DLP in all hospitals was higher that Korea recommendation of 700mGy.cm. Among target hospitals, C hospital showed high radiation dose in all tests because MPR and 3D were of great importance due to low pitch and high Tube Curren. To analyze the difference of radiation dose by scan methods, normal scan and helical scan for head CT of the same patient were performed. In the result, CTDI and DLP of helical CT were higher 63.4% and 93.7% than normal scan (p<0.05, p<0.01). However, normal scan of radiation dose in thyroid was higher 87.26% (p<0.01). Beam of helical CT looked like a bell in the deep part and the marginal part so thyroid was exposed with low radiation dose deviated from central beam. In addition, helical scan used Gantry angle perpendicularly and normal scan used it parallel to the orbitomeatal line. Therefore, radiation dose in thyroid decreased in helical scan. However, a protocol in this study showed higher radiation dose than diagnostic reference level of KFDA. To obey the recommendation of KFDA, low Tube Curren and high pitch were demanded. In this study, the difference of image quality between normal scan and helical scan was not significant. Therefore, a standardized protocol of normal scan was generally used and protective gear for thyroid was needed except a special case. We studied a part of CT cases in the local area. Therefore, the result could not represent the entire cases. However, we confirmed that patient's radiation dose in some cases exceeded the recommendation and the deviation between hospitals was observed. To improve this issue, doctors of diagnostic imaging or technologists of radiology should perform CT by the optimized protocol to decrease a level of CT radiation and also reveal radiation dose for the right to know of patients. However, they had little understanding of the situation. Therefore, the effort of relevant agencies with education program for CT radiation dose, release of radiation dose from CT examination and addition of radiation dose control and open CT contents into evaluation for hospital services and certification, and also the effort of health professionals with the best protocol to realize optimized CT examination.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.38-40
• /
• 2010

Purpose: This study was performed to find the current problems of PET/CT data from other hospitals. Materials and Methods: The subjects were acquired from 64 hospitals referred to our department for image interpretation. The formats and contents of PET/CT data were reviewed and the phone questionnaire survey about these were performed. Results: PET/CT data from 39 of 64 hospitals (61%) included all transaxial CT and PET images with DICOM (Digital Imaging Communications in Medicine) standard format which were required for authentic interpretation. PET/CT data from the others included only secondary capture images or fusion PET/CT images. Conclusion: The majority of hospitals provided limited PET/CT data which could be inadequate for accurate interpretation and clinical decision making. It is necessary to standardize the format of PET/CT data to transfer including all transaxial CT and PET images with DICOM standard format.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.234-242
• /
• 2014

Imicyafos which is a nematicide for controlling root-knot nematodes has been registered in the Republic of Korea in 2012, and the maximum residue limits of imicyafos are set to watermelon and korean melon as each 0.05 mg/kg. Extremely reliable and sensitive analytical method is required for ensuring food safety on imicyafos residues in agricultural commodities. Imicyafos residues in samples were extracted with acetone, partitioned with hexane and dichloromethane, and then purified with florisil. The purified samples were analyzed by HPLC-UVD and confirmed with LC-MS. Linear range was between 0.1~5 mg/kg with the correlation coefficient ($r^2$) 0.99997. Average recoveries of imicyafos ranged from 77.0 to 115.4% at the spiked levels of 0.02 and 0.05 mg/kg with the relative standard deviations of 2.2~9.6%. Limit of detection and quantification were 0.005 and 0.02 mg/kg, respectively. An inter-laboratory study was conducted to validate the determination method in depth, and the results were satisfactory. All of the validation results revealed that the developed analytical method in this study is relevant for imicyafos determination in agricultural commodities and will be used as an official analytical method.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.237-258
• /
• 2022

As the global market environment changes, the domestic ICT industry has a growing influence on the world economy. This industry is regarded as an important driving force in the national economy from a technological and social point of view. In particular, small and medium-sized enterprises (SMEs) in the ICT industry are regarded as essential actors of domestic economic development in terms of company diversity, technology development and job creation. However, since it is small compared to large-sized enterprises, it is difficult for SMEs to survive with a differentiated strategy in an incomplete and rapidly changing environment. Therefore, SMEs must make a lot of efforts to improve their own capabilities, and the government needs to provide the desirable help suitable for corporate internal resources so that they can continue to be competitive. This study classifies the types of ICT SMEs participating in government support programs, and analyzes the relationship between resources and performance creation of each type. The data from the "ICT Small and Medium Enterprises Survey" conducted annually by the Ministry of Science and ICT was used. In the first stage, ICT SMEs were clustered based on common factors according to their experiences with government support programs. Three clusters were meaningfully classified, and each cluster was named "active participation type," "initial support type," and "soloist type." As a second step, this study compared the characteristics of each cluster through profiling analysis for each cluster. The third step carried out in this study was to find out the mechanism of R&D performance creation for each cluster through regression analysis. Different factors affected performance creation for each cluster, and the magnitude of the influence was also different. Specifically, for "active participation type", "current manpower", "technology competitiveness", and "R&D investment in the previous year" were found to be important factors in creating R&D performance. "Initial support type" was identified as "whether or not a dedicated R&D organization exists", "R&D investment amount in the previous year", "Ratio of sales to large companies", and "Ratio of vendors supplied to large companies" contributed to the performance. Lastly, in the case of "soloist type", "current workforce" and "future recruitment plan", "technological competitiveness", "R&D investment", "large company sales ratio", and "overseas sales ratio" showed a significant relationship with the performance. This study has practical implications of showing what strategy should be established when supporting SMEs in the future according to the government's participation in the startup program and providing a guide on what kind of support should be provided.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.2
• /
• pp.287-294
• /
• 2009

This study was conducted to evaluate the perception and satisfaction of undergraduates majoring in culinary arts and food service with working and internship abroad. The responses of the participants to 10 questions regarding perception and 13 questions regarding the importance and satisfaction with working and internship abroad were measured on a 5 point Likert scale. The primary results were as follows : 1) The subjects were composed of 50.9% male and 49.1% female students, of which 42.1% were employed and 57.9% experienced an internship abroad. 2) Most students went abroad to gain experience with respect to various foreign cultures in response to recommendations by the western cuisine department. 3) The items "I wish to conduct my affairs continuously"(M=4.21) and "I have good relationships with my colleagues at work"(M=4.11) received the highest points from male and female respondents, respectively. 4) Male students considered "cooperation among divisions"(M=4.11), "language skills"(M=4.38), and "kitchen environment"(M=4.34) to be very important. However, female students believed that "language skills"(M=4.36),"social relationships"(M=4.21), and "wage income"(M=4.18) were most important. Furthermore, male students were most satisfied with "company size" (M=4.28), "kitchen environment"(M=4.21), and "business hours"(M=4.10), while female students were most satisfied with "kitchen environment","incentive"(M=4.14) and "social relationships"(M=4.11).