• 멤브레인
• /
• 제3권1호
• /
• pp.12-21
• /
• 1993

세라믹 분리막은 알루미나($Al_2O_3$), 지르코니아($ZrO_2$), Carbon, 실리콘 카바이드, 스테인레스 등의 무기재료를 이용하여 제조된 분리막이다. 압출성형공정으로 제조된 지지체는 1700$^{\circ}C$ 이상의 소결공정을 거치므로 지지체 상단에 슬러리 코팅공정으로 형성된 얇은 막에게 안정된 분리기능을 수행할 수 있도록 커다란 물리적 강도를 제공한다. 따라서, 세라믹 분리막은 다공성 세라믹 구조를 갖는 특징적인 두 개 또는 세 개의 균일한 층으로 구성된 복합막이라 할 수 있다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.296-300
• /
• 2004

현재 구조용 세라믹에 대한 연구는 여려 가지 작동 조건에 의해 도출된 마멸 데이터를 정량적으로 제시하고 이들의 마멸기구의 변화가 일어나는 사용 조건의 시점을 파악하였다. 이전의 연구들은 주로 동질 재료끼리 마찰 마멸 실험으로 제한되었다. 그러나 상대 운동하는 세라믹 재료들의 특성 상 기계적, 화학적 물성차이에 의해 마멸 기구와 트라이볼로지적 거동(마찰계수, 마멸율)등 이 다르게 나타날 확률이 높다. 이에, 본 연구에서는 볼 온 디스크 마멸 실험을 통해 여러 가지 작동환경에 따라 서로 상대 운동하는 세라믹의 재료를 달리하여 실험하여 다른 세라믹 재료간의 트라이볼로지적 특성을 고찰하였다. 지르코니아 시편에 대해 지르코니아, 알루미나, 실리콘카바이드 3종의 상대재를 사용하여 속도와 하중조건을 변화하여 마멸실험을 수행한 결과, 지르코니아-실리콘카바이드 조합의 실험에서 저마찰 저마멸 특성이 나타났다.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.429-436
• /
• 1991

Silicon carbide has been grown by a chemical vapor deposition (CVD) technique using CH3SiCl3 and H2 gaseous mixture onto a graphite substrate. Based on the thermodynamic equilibrium studies and the suggestion that the deposition rate of SiC is controlled by surface reaction theoretical kinetic equation for CVD of silicon carbide has been proposed. The proposed theoretical kinetic equation for CVD of silicon carbide agreed well with the experimental results for the variation of the deposition rate as a function of the partial pressure of reactant gases. The Vikers microhardness of the SiC layer was about 3000∼3400 kg/$\textrm{mm}^2$ at room temperature.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.589-595
• /
• 2000

Densification behavior of SiC powder was investigated under cold compaction. A special form of the Cap model was proposed from experimental data of SiC powder under triaxial compression. To compare with experimental data of SiC powder under cold compaction, the proposed constitutive model was implemented into a finite element program (ABAQUS). Finite element calculations from the Cam-Clay model and the modified Drucker-Prager model were also compared with experimental data of SiC powder. The agreements between experimental data and finite element results obtained from the proposed constitutive model are reasonably good. In die pressing, finite element results obtained from the Cam-Clay model and the modified Drucker-Prager model, however, show lower average density of SiC powder compacts compared to experimental data.

• Journal of Welding and Joining
• /
• 제15권5호
• /
• pp.104-114
• /
• 1997

The microstructure and bond strength were investigated on the SiC/SiC and SiC/mild steel joints brazed by Ag-5at%Ti alloy. Ag-5at%Ti-2at%Fe and -5at%Fe brazing alloys were also used to see the effects of Fe addition on the bond strength of SiC/SiC brazed joints. Brazing temperature and brazing gap were selected and examined as brazing variables. The microstructure of SiC/SiC brazed joints was affected by Fe addition to the Ag-5at%Ti alloy, but the bond strength was not. Increasing brazing temperature also changed the microstructure of $Ti_5Si_3$ reaction layer and brazing alloy matrix of the SiC/SiC and SiC/mild steel joints, but not the bond strength. Brazing gap had a great effects on the bond strength. Decreasing brazing gap from 0.2 mm to 0.1 mm in SiC/SiC brazing increased the bond strength from 187 MPa to 263 MPa and, in SiC/mild steel brazing, from 189 MPa to 212 MPa. It was concluded that the most important parameter on the bond strength in SiC/SiC and SiC/mild steel brazing was the relative ratio between brazing gap and specimen size.

• Journal of Welding and Joining
• /
• 제14권4호
• /
• pp.99-108
• /
• 1996

The microstructure and bond strength are examined on the SiC/SiC and SiC/mild steel joints brazed by the Ag-Ti based alloys with different Ti contents. In the SiC/SiC brazed joints, the thickness of the reaction layers at the bond interface and the Ti particles in the brazing alloy matrices increase with Ti contents. When Ti is added up to 9 at% in the brazing alloy. $Ti_3SiC_2$ phase in addition to TiC and $Ti_5Si_3$ phase is newly created at the bond interface and TiAg phase is produced from peritectic reaction in the brazing alloy matrix. In the SiC/mild steel joints brazed with different Ti contents, the microstructure at the bond interface and in the brazing alloy matrix near SiC varies similarly to the case of SiC/SiC brazed joints. But, in the brazing alloy matrix near the mild steel, Fe-Ti intermetallic compounds are produced and increased with Ti contents. The bond strengths of the SiC/SiC and SiC/mild steel brazed joints are independent on Ti contents in the brazing alloy. There are no large differences of the bond strength between SiC/SiC and SiC/mild steel brazed joints. In the SiC/mild steel brazed joints, Fe dissolved from the mild steel does not affect on the bond strength of the joints. Thermal contraction of the mild steel has nearly no effects on the bond strength due to the wide brazing gap of specimens used in the four-point bend test. The brazed joints has the average bond strength of about 200 MPa independently on Ti contents, Fe dissolution and joint type. Fracture in four-point bend test initiates at the interface between SiC and TiC reaction layer and propagates through SiC bulk. The adhesive strength between SiC and TiC reaction layer seems to mainly control the bond strength of the brazed joints.

• 방사성폐기물학회지
• /
• 제16권2호
• /
• pp.233-242
• /
• 2018

본 연구에서는 탄소강 심부시추공 처분용기가 가지는 고온에서의 물성 저하와 내부식성 문제 등을 해결하기 위하여, 열전도도가 우수한 SiC를 이용한 심부시추공 처분용기의 제작 가능성을 살펴보았다. 먼저 사용후핵연료 집합체 1다발을 수용할 수있는 심부시추공 처분용기를 설계하였으며, 설계된 처분용기는 내부 SiC 기밀용기와 취급 편의와 심부정치를 위한 외부 스테인리스 용기로 구성하였다. 그리고 SiC 세라믹 용기의 제작 가능성을 확인하기 위해, 1/3 규모의 소형 SiC 용기를 실제 제작하였다. 제작된 SiC 용기에서 시편을 추출하여 열전도도를 측정하였으며, KURT 지하 $70^{\circ}C$ 고온조건에서 3년간 내구성 시험도 실시하였다. 그 결과 SiC는 $100^{\circ}C$에서도 $70W{\cdot}m^{-1}{\cdot}K^{-1}$ 이상의 열전도도를 보였으며, 내구성 시험 후에도 변화가 전혀 보이지 않았다. 따라서 SiC는 높은 열전도도와 우수한 내부식성을 갖고 있어, 심부시추공 처분용기 재료로 적합하다고 보았다.