• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.265-266
• /
• 2018

In recent years, active loess cement has been used instead of cement in order to reduce the amount of cement and industrial byproducts that are the main cause of environmental pollution. We also used polysilicon sludge as a by-product to reduce the amount of cement used and to improve the environmental pollution due to the reduction of carbon dioxide. Polysilicon is a raw material used in the production of panels for solar power generation. When producing 1 ton of polysilicon, 2 tons of sludge is generated. It is an experiment to reduce sludge treatment and cement usage. This study analyzed basic characteristics of polysilicon sludge and active loess cement according to replacment ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.165-166
• /
• 2018

Researches for the development of renewable energy as a fuel substitute for global warming and depletion of petroleum resources are actively being carried out. Among them, the annual growth rate of PV generation is 20.73%, which is higher than other renewable energy sources. However, the production of 1 ton of polysilicon, which is known as a raw material for solar power generation panels, generates 2 tons of waste. As the demand for PV panels increases, the problem of the treatment of polysilicon sludge is attracting attention, and studies on the utilization of polysilicon sludge are needed. Therefore, in this study, the applicability of polysilicon sludge treated as industrial waste to the lightweight panel for architectural purposes was examined.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.152-153
• /
• 2015

Recently, solar energy generation is one of the fastest growing industries for eco-friendly energy. Every year, solar energy generation industry grows to 42% on average. However, polysilicon sludge is generated from processing of polysilicon but, there is nothing to handle that. Therefore, we need research to recycle polysilicon sludge. Also, improved fire resistance efficiency of wall is required according to reinforced fire safety standards due to many cases of big fires in our country. This study focuses on density and strength properties according to the addition ratio of paper Ash for the lightweight composite panel core with polysilicon sludge. As a result of the test, adding paper ash 9% has the best density and strength properties.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.146-147
• /
• 2014

The environmental pollution problem the globally related to global warming arises, the demand for the solar power generation increases. But is generated sludge about 2tons in order to produce 1ton in the solar power generation used main material polysilicon. In this way, the arising sludge there is not method recycling and it is all discarded. Therefore, in this research, cement is not used dynamic properties tries to be analyze inorganic binder based on blast furnace slag and polysilicon sludge ratio. The appropriate replacement ratio of the experimental result polysilicon sludge was to be 8%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.171-172
• /
• 2014

This is an experimental study on manufacturing of non-cement matrix. Materials like cement and blowing agent in foamed concrete is replaced by by-products from blast furnace slag and paper ash. Sample 43-PS-1 with density showed lowest. The compressive strength test result, showed a similar trend with density. And it showed that compressive strength of the 40-PS-1 was highest.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.215.1-215
• /
• 2003

• Magazine of RCR
• /
• v.13 no.3
• /
• pp.39-45
• /
• 2018

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.187.2-187.2
• /
• 2011

태양광산업의 value chain중 up-stream쪽인 고순도 실리콘산업은 셀, 모듈, 시스템 쪽에 비하여 영업 이익률이나 부가가치 측면에서 매우 높은 성장성을 현재 보여주고 있으며 최근 원자력산업의 안전성 문제가 대두됨으로 인하여 태양광수요가 전 세계적으로 증대되는 경향을 나타내어 태양광용 실리콘의 수요가 확대됨과 아울러 spot시장에서의 가격 또한 상승하고 있다. 이런 관점에서 잉곳 및 웨이퍼 가공 중에 발생하는 고순도 실리콘 폐기물의 재활용 이 다시 주목받고 있다. 태양전지 웨이퍼(wafer)용 소재는 6N급 이상의 결정질 실리콘 잉곳(ingot)이 주를 이루며, 고효율의 셀을 제조하기 위해서 단결정 실리콘 잉곳이 많이 사용된다. 실리콘 단결정을 육성하는 방법에는 Floating zone 법, Czochralski 법, Bridgeman 법, CVD 등 매우 다양하다. 이 중 Czochralski 법은 전체 생산량의 대부분을 차지하고 있는 방법으로, 용융액에서 결정을 인상하여 ingot을 제작하는 방법이다. 그러나 대량의 전기에너지를 소비하여 제작되는 고순도의 실리콘 단결정 잉곳은 후 가공공정에서 그 절반 이상이 분말(powder) 및 슬러지(sludge)로 폐기되므로, 자원의 재활용 및 환경오염 측면에서 주요과제가 되고 있다. Czochralski 법으로 제작된 ingot의 경우 그 표면이 매끄럽지 못하여, 웨이퍼 단위의 가공 시 형태가 진원이 될 수 있도록 표면을 미리 연마(grinding)하는데, 이때에도 미세 분말이 다량 발생하게 된다. 본 연구에서는 이러한 고순도 단결정 실리콘 ingot의 연마 가공공정에서 발생한 미세 분말을 용해하여 보았다. 진공 챔버(chamber) 내부에 유도가열 코일과 냉도가니로 구성된 장비를 통해 전자기유도가열을 이용하여 실리콘 분말 폐기물을 용해하고, 그 시편을 ICP-MS 및 비저항 측정을 통해 분말 의 특성을 조사하여 재활용 가능성을 검토해 보았다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.240-241
• /
• 2014

The environmental pollution problem the globally related to global warming arises. In the construction industry the cement mostly use material, generates the great quantity of CO₂ among the fired process and the global warming is more aggravated. In addition, the polysilicon that is the main raw material used in the solar power generation, produces 1 ton and the industrial by-product of 2 tons is generated. In this way, the arising sludge there is not method recycling and it is all discarded. Therefore, in this research, try to present as the fundamental research material for using the polysilicon sludge as the admixture of the cement in order to reduce the amount of the cement. The based on 'KS L ISO 679' was progressed mortar test. the liquidity, air flow rate, setting time, water absorption ratio, flexural and compression strength was measured. According to, appropriate replacement ratio of the polysilicon sludge tries to analyze.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.173-174
• /
• 2017

Recently, many experiments using industrial by-products have been going on in Korea and abroad. Most of the studies on blast furnace slag and fly ash have been conducted, and the blast furnace slag based two and three component experiments have been conducted in many places. Therefore, this study is an additional study of research using polysilicon sludge and paper ash, which is a study using existing industrial by-products based on blast furnace slag, as strength properties of alkali activator according to kind and mixing ratio and to obtain basic data do.