• Journal of Welding and Joining
• /
• v.4 no.3
• /
• pp.13-25
• /
• 1986

철강 구조물의 용접기술에 있어 용접부의 신속성을 좌우하는 가장 중요한 요소는 용접균열에 관한 문제와 용접본드부의 취화에 관한 문제로 요약될 수 있다. 일반적으로 용접부 및 그 근방의 금속은 국부적으로 매우 높은 온도까지 급열된 후 급냉되므로, 용접부에서 각종균열의 발성 위험성이 높아지고 용접본드부를 취화하여 파양인성의 저하를 초래하게 된다. 따라서 이러한 문 제점을 극복하기 위해서는 재료의 선택이나 설계, 시공, 검사의 각 단계에서 충분한 검토가 필 요하다. 특히 최근 들어 이전보다 높은 강도의 고장력강재가 널리 사용되고 구조물의 대형화에 따라 구속조건이 증대되며 구조물의 사용 조건은 더욱 가혹 화함에 따라 상술한 문제점은 더욱 중요시되고 있다. 철강 용접부에 발생하는 균열은 용접시공시 발생되는 균열과 용접완료후 구 조물 사용중에 발생되는 균열로 대별될 수 있다. 용접시공중 발생되는 균열은 용접열싸이클로 인해 생성되는 조직, 석출물등의 치금학적 요인과 잔유응력 또는 구속응력등의 역학적 요인이 중첩됨으로서 발생된다. 또한 사용중 발생되는 균열은 상기의 두 가지 요인이외에 환경적 요인이 첨가되어 발생된다고 볼 수 있다. 이상과 같은 용접균열을 방지하기 위해서는 실 구조물 용접 조립시의 각종 조건을 재현한 시험법을 통해 용접균열 발생의 한계조건을 정량적으로 분석할 필요가 있다. 이러한 균열 시험의 결과, 적정한 용접 시공 조건이 도출될 수 있기 때문이다. 이와 같은 필요성에 의해 지금까지 다수의 용접균열 시험법에 관한 연구가 행하여져 왔고 그 중에는 각 국가의 협회나 학회의 규격으로 확립된 것도 많으며 국제규격으로 되어 있는 것도 있다. 본 고에서는 각종균열들에 대한 지금까지 밝혀진 기구들에 대해 해설하고, 그 각각에 적용되고 있는 시험법들에 대해 소개하고저 한다.C1지구의 공업.생활용수는 103units, 33units로 배분되고, 하류지구에 304units로 배분되었다. 따라서 용도별로 물배분하므로서 금호강 하루지역에 더욱 많은 물을 배분할 수 있음을 알았다.통해서 수위-유량관계(rating curve)를 규명하였다. 시험지구의 관개효율 및 용수손실 규명 등에 관한 기본자료를 수집하기 위해서는 계측시스템의 운영은 장기간으로 지속 되어야 한다며, 전기전도도와 토양수 농도, 전기전도도와 함수량의 관계를 이용한 천이상태의 오염원 농도 측정방법을 개발하였다. 특히 제안식에서는 한계함수량의 개념을 도입하여 전기전도도와 함수량관계를 추정하므로 추정식의 실험값 반영 정도를 증가시켰다. 본 연구에서 제안된 식을 이용하여 추정된 전기전도도와 함수량관계는 다른 제안식에 비하여 개선된 결과를 보여 주었고, 본 연구에서 개발한 오염원 농도 측정법을 이용하여 측정한 결과 함수량이 0.15이하에서는 측정오차가 크지만 함수량이 0.15이상일 경우 매우 좋은 결과를 보였는데 질량평형을 검토한 결과 약 5-10%의 오차율을 보였다. 따라서 본 논문에서 개발된 천이상태의 오염원 농도측정법은 용존 오염물질의 이송에 관한 정확한 실험을 제공할 것으로 판단된다.며, 수질 보전적-환경 보전 차원에서 저수관리 체계를 확고히 할 수 있는 방안을 강구하여야 할 것이다.펄스주입법에 의해 증착된 박박은 강유전성 이력을 나타내었다.지역과 비도시지역을 비교하는 조사 연구가 필요하며, 이러한 조사결과를 바탕으로 자녀의 식습관에 대한 교육을 위한 교재, 교구의 개발과 영양, 식습관 교육프로그램의 개발을 통해 가정과 학교에서 부모와 교사가 자녀의 식생활 지도 관리를 돕고 가정과 교육기관이 연계한 교육 프로그램이 활성화 될 수 있도록 지속적인 관심을 기울여 나가야 할 것이며, 이에 따른

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.340-347
• /
• 2010

Though there are many crimes on and out university campus in Korea, no one knows anything about the size or the types of campus crime. But, there are many theft crimes and sex assault in the library and one-room village near the university campus. This study suggested the establish ways and means needed to improve the campus security system, with the focus on the CPTED(Crime Prevention Through Environmental Design). Various types of crime prevention methods are being considered instead of conventional crime suppression measures. Among them, CPTED is drawing global attention. Crime prevention through environmental design is a multi-disciplinary approach to deterring criminal behavior through environmental design. CPTED strategies rely upon the ability to influence offender decisions that precede criminal acts. A truly safe campus can be achieved only through the cooperation of all students, faculty, staff and visitors. The cooperation and involvement of the entire campus community in campus crime prevention is absolutely necessary. University should adopt a series of policies and procedures designed to ensure that every possible precaution is taken to protect persons and property on campus.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.279-291
• /
• 2020

It has already been a few years since the word Fintech in Korea started to attract attention. These days, they believed that Fintech was just a boom, but these days it is recognized as a catalyst for financial transformation. Large venture companies are also launching demonstration experiments by creating new organizations that can respond to Fintech. It feels like a big tide is coming to the cautious and conservative financial industry. Finance is made up of digital information. Fintech is an evolutionary process in which finance, expressed by digital information, is transformed into information technology (IT) and human economic activities are reorganized. It is FinTech. You won't be able to understand the real effects of Fintech by sticking to individual applications like remittance payments or household account book services. Fintech is an innovation that changes the structure of economic activity itself. In fact, it is from now on that a big impact will come. In other words, now is the time when we are thinking of a dream that we have not yet dreamed of. In this paper, I will examine how fintech originated, spread to Korea, and how it intends to change Korea's finance in the future. Financial institutions have used the fruits of information technology advances in the direction of pursuing stability and stability, without major changes in the way they work. However, the movement of Fintech that started in Silicon Valley in the United States shows that the fruit can be used in other directions. The fruit of technological progress is expected to expand year by year in the future. It is a request of the times to use it to improve user convenience and to pursue innovation that is beneficial to society. We expect the flow of Fintech to accelerate innovation in the Korean financial industry.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.2
• /
• pp.110-116
• /
• 2014

Recently the number of the butterflies, Mellicta ambigua, had been decreasing rapidly, and already disappeared at many habitat. In this studies, we investigated ecological environment of Mellicta ambigua for preparing of primary research data recovering habitat, and studied on bionomical characteristics. Two different habitat, Jindo and Inje, were selected for investigation of ecological environment. We investigated four times during 3-month, from June to August in 2012. In Jindo, we observed more than 100 butterflies and a lot of host plants, Melampyrum roseum var. japonicum. But only 5 butterflies and only a few host plants, Veronicastrum sibiricum were observed in Inje. We could not observe the eggs, the larva and pupa on the host plants at all. For finding of bionomical characteritics, we reared butterflies at natural conditions. Collected 3-female butterflies from Jindo laid 465 eggs on the leaves of 3-host plants, Veronicastrum sibiricum. 120 ~ 186 eggs per each female were laid in the shape of cluster. An egg was globular shape, 0.6 mm diameter and 0.7 mm height. The egg periods were $9.96{\pm}0.4days$ after ovipositioning, and the hatchability was 95.% at natural condition. The larval periods were $4.1{\pm}0.6days$ (1st instar), $2.1{\pm}1.0days$ (2nd), $8.1{\pm}0.7days$ (3rd), $239.2{\pm}10.9days$ (4th), $12.3{\pm}1.3days$ (5th), $17.1{\pm}1.1days$ (6th), $10.5{\pm}1.0days$ (7th) each other. The larva of 4th instar overwintered in the nest that had been made into the leaf of host plant with secreted thread as a group until early March next year. In the early March next year, overwintered larva went around their nest in search of host plants, and went to other host plants, Veronica persica and Plantago asiatica, sometimes. The overwintered larva of Mellicta ambigua could grow up on two other host plants normally. In the following experiment, the butterflies of Mellicta ambigua laid eggs on the leaves of Plantago asiatica, but the 1st instar larva from eggs died all. The headwidth of each developmental larval stage were $0.28{\pm}0.02mm$ (1st), $0.45{\pm}0.02mm$ (2nd), $0.58{\pm}0.02mm$ (3rd), $0.75{\pm}0.03mm$ (4th), $0.89{\pm}0.05mm$ (5th), $1.23{\pm}0.06mm$ (6th), $2.13{\pm}0.11mm$ (7th). The pupal ratio was 92.0%. The pupal period were $9.1{\pm}1.6days$, and the emergence rate was 88.6%. As a result we determined that Mellicta ambigua can rear at natural conditions. But indoor-rearing is considered to be difficult and not useful industrially, because they have long term larval stage and only one life cycle per an year.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.489-495
• /
• 2020

Whereas the control of the hydration heat in mass concrete has been important as the concrete structures enlarge, many conventional strategies show some limitations in their effectiveness and practicality. Therefore, In this study, as a solution of controling the heat of hydration of mass concrete, a method to reduce the heat of hydration by controlling the hardening of cement was examined. The reduction of the hydration heat by the developed Phosphate Inorganic Salt was basically verified in the insulated boxes filled with binder paste or concrete mixture. That is, the effects of the Phosphate Inorganic Salt on the hydration heat, flow or slump, and compressive strength were analyzed in binary and ternary blended cement which is generally used for low heat. As a result, the internal maximum temperature rise induced by the hydration heat was decreased by 9.5~10.6% and 10.1~11.7% for binder paste and concrete mixed with the Phosphate Inorganic Salt, respectively. Besides, the delay of the time corresponding to the peak temperature was apparently observed, which is beneficial to the emission of the internal hydration heat in real structures. The Phosphate Inorganic Salt that was developed and verified by a series of the aforementioned experiments showed better performance than the existing ones in terms of the control of the hydration heat and other performance. It can be used for the purpose of hydration heat of mass concrete in the future.

• Korean Journal of Ichthyology
• /
• v.21 no.1
• /
• pp.7-14
• /
• 2009

The effect of water temperature (T) and body weight (W) on oxygen consumption of fasted starry flounder Platichthys stellatus was investigated in order to assess the metabolic response of this species at given conditions. The oxygen consumption rate (OCR) was measured under six different water temperatures (4, 7, 10, 13, 16 and $19^{\circ}C$) and at two different body weights (mean weight of fry group : 1.5 g; fingerling group : 37.4 g) at an interval of 5 minutes for 24 hours using a continuous flow-through respirometer. In each treatment three replicates were set up and a total 540 fish in fry groups and 90 fish in fingerling groups were used. The OCRs increased with increase of water temperature in both groups (p<0.001). Mean OCRs at 4, 7, 10, 13, 16 and $19^{\circ}C$ were 1386.0, 1601.7, 1741.0, 1799.2, 2239.1 and $2520.3mg\;O_2\;kg\;fish^{-1}\;h^{-1}$ in fry groups, and 83.8, 111.4, 126.3, 147.1, 187.7 and $221.3mg\;O_2\;kg\;fish^{-1}\;h^{-1}$ in fingerling groups, respectively. The OCRs decreased with increasing body weights at six different water temperatures (p<0.001). The relationship between water temperature and body weight is described by the following equation : OCR=1520.91+40.85T-49.22W ($r^2=0.95$, p<0.001). The energy loss by metabolic response increased with an increase in water temperature and a decrease in body weight (p<0.001). Mean energy loss rates by oxygen consumption at 4, 7, 10, 13, 16 and $19^{\circ}C$ were 907.9, 1046.5, 1141.6, 1177.0, 1467.3 and $1650.1kJ\;kg\;fish^{-1}\;d^{-1}$ in fry groups and 54.8, 73.0, 82.9, 96.2, 122.9 and $144.6kJ\;kg\;fish^{-1}\;d^{-1}$ in fingerling groups, respectively. The $Q_{10}$ values of fingerling groups were higher than those of fry groups at given temperature ranges. The $Q_{10}$ values at $4{\sim}7^{\circ}C$, $7{\sim}10^{\circ}C$, $10{\sim}13^{\circ}C$, $13{\sim}16^{\circ}C$ and $16{\sim}19^{\circ}C$ were 1.62, 1.32, 1.12, 2.07 and 1.48 in fry groups, and 2.59, 1.52, 1.67, 2.25 and 1.73 in fingerling groups, respectively.