• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.297-304
• /
• 2011

MIMO wireless communication embedded systems, and for propagation prediction for indoor and outdoor propagation prediction program incorporates an indoor/outdoor propagation through the simulator can be predicted. This analysis technique developed by the interference between multiple transmitters and a maximum transmission distance issues, the frequency utilization efficiency for a variety of issues, including analysis and prediction becomes possible. Development of the prediction of the conventional methods, but I can consider the environmental characteristics of the ray tracing simulation software to develop and implement an efficient ray tracing, ray tracing techniques and are designed to enable tracked beam analysis of propagation characteristics using information technology by combining the theoretical characteristics of an efficient and well-reflected propagation prediction technique was employed. The frequency of domestic embedded systems, ensure the frequency characteristics and frequency of 3-5GHz band for propagation to investigate the development of local wireless communication technology-based skills needed for securing and jeonpaganseopdeung frequency management techniques to ensure the verification and verified through experiments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1031-1040
• /
• 2023

Propagation characteristics in line-of-sight(LOS) paths in 3, 6, 10, and 17 GHz frequency bands were measured and analyzed in two different indoor corridors: second floors of Buildings D2 and E2. The measurement was designed to measure when the receiving antenna moved at 0.5 m intervals from 3 m to 30 m, while the transmission antenna was fixed. The analysis of the two indoor corridors was compared by applying basic transmission loss, root mean square (RMS) delay spread, and K-factor. For basic transmission loss, the loss coefficient of the floating intercept path loss model was higher in the indoor corridor of Building E2 than in that of Building D2. Similarly, the RMS delay spread in the time domain was greater in the indoor corridor of Building E2. However, the indoor corridor of Building D2 exhibited higher K-factor in the 3, 6, and 17 GHz bands with lower wave propagation in the 10 GHz band. Despite the 2 indoor corridors being identical, the propagation characteristics varied due to different internal structures and materials. The results provide measurement data for ITU-R Recommendations regarding various indoor environments.

• Electronics and Telecommunications Trends
• /
• v.29 no.6
• /
• pp.113-125
• /
• 2014

최근 모바일 단말 기술의 발전과 무선망의 성능 향상에 따른 다양한 서비스가 제공되고 있는 추세이며, 위치정보인식시스템과 결합된 서비스에 많은 관심이 높아졌다. 본고에서는 GPS(Global Positioning System)의 신호가 미치지 못하는 건물의 실내환경에 적합한 경로 안내서비스 및 지하시설물 안내 등 초정밀 실내 측위 서비스를 제공하기 위한 융합 측위 방안을 제안한다. 융합 측위 방안은 실내외 연속 측위를 위해 실외에서는 GPS를 이용하고 실내환경에서는 WLAN 기반의 측위 전용 AP(Access Point)를 이용, 전파신호의 LoS(Line of Sight)를 확보하여 측위하고 전파음영지역에서는 스마트폰의 가속도, 자이로센서 등 여러 가지 관성센서를 활용하여 PDR(Pedestrian Dead Reckoning) 알고리즘 등을 적용하여 측위한다. 또한 측위 정확도 향상 및 오차를 줄이기 위한 방법으로 LSE(Least Squire Estimation) 및 EKF(Extended Kalman Filter), KNN(K-Neighbor Node)/MSSM(Maximum Signal Strength Model) Algorithm 등 다양한 융합 측위 알고리즘을 적용하여 실내환경에 적합한 최적의 초정밀 실내 측위 서비스를 제공한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.651-654
• /
• 2008

협대역 다중접속 방식의 한계를 벗어난 Ultra-wide band(UWB) 기술이 고속 데이터 전송을 위해 많이 개발되어지고 있다. UWB 시스템은 방사전력 제한을 두고 있어서 근거리 실내 무선통신 분야에서 활용 범위가 확대되고 있다. 하지만 실내 무선 환경에서는 벽, 천장, 바닥 그리고 실내에 위치한 장애물 등에 의한 다중경로 페이딩 영향으로 초고속 실내 무선통신 서비스를 제공하는데 어려움이 있다. 이러한 실내 다중경로 성분에 의한 페이딩을 경감시키는 여러 가지 방법 중에서 원형편파를 이용하면, 상대적으로 긴 지연을 갖는 강한 다중경로 성분을 효과적으로 제거할 수가 있기 때문에 수신신호의 RMS 지연 감소, 페이딩 경감 및 신호강도 개선효과 등을 얻을 수 있다. 본 논문에서는 원형편파를 고려한 수정된 UWB 채널의 파라미터를 수정 정립하였고, 수정된 채널모델을 UWB 시스템에 적용하여 성능 개선을 시도하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1224-1230
• /
• 2007

Recently, wireless LAN are often applied in home or office because of its various of convenience. Frequency rage of wireless LAN specified by IEEE 802.11a is at 5.2 GHz and IEEE 802.11b is 2.4 GHz. But in offices with wireless LAN devices, reflection of waves against walls, ceilings, floors and desks made of metal creates multipath problems that reduce communication speed and lose data. These problems can be solved by using EM wave absorber. In this paper, we designed and fabricated EM wave absorbers using MnZn-ferrite, sendust, carbon and CPE(Chlorinated Polyethylene). The EM wave absorber with the ratio of MnZn-Ferrite : sendust : CPE=64 : 16 : 20 wt.% has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz and the EM wave absorber with the ratio of MnZn-ferrite : carbon : CPE=40 : 15 : 45 wt.% has thickness of 3.8 mm and absorption ability more than 23 dB at 5.2 GHz.

• Information and Communications Magazine
• /
• v.9 no.7
• /
• pp.60-68
• /
• 1992

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1876-1884
• /
• 1999

The next generation of wireless LAN AND PBX systems will make use of the unlicensecd band at 2.5 GHz. Deployment of these systems inside buildings requires and understanding of propagation characteristics within buildings. Because the wavelength is small compared to building dimensions, ray methods can be used to predict propagation, but they require knowledge of the transmission and reflection properties of walls. This paper reports on transmission measurements made at walls made of gypsum board on metal studs, and at concrete block walls using directive antennas. The measurements are found to give good agreement with theoretical results that account for the periodic nature of the wall structure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.372-373
• /
• 2013

위성항법시스템(GNSS)에 대한 전파교란에 대응하기 위한 보완항법시스템인 eLoran은 고출력의 지상파를 사용하기 때문에 전파교란이 현실적으로 힘들다는 장점이 있다. eLoran 신호는 세계표준시(UTC)에 동기화 되어있어서 송신 출력에 따라 실내와 같이 GNSS 신호의 수신이 힘든 경우에도 정확한 시각(timing) 정보를 제공할 수 있다. eLoran을 이용한 시각 정보 제공은 미국 국방부(DoD)에서도 최근에 많은 관심을 보이고 있다. 또한 eLoran은 자체 데이터 채널을 보유하고 있어서 eLoran 보정 신호를 전송할 수 있고, 전파기만에 대비하여 eLoran 신호인증 기법을 적용할 수 있다. 전파교란의 영향을 받지 않고 데이터를 전송할 수 있기 때문에 안정적인 데이터 전송이 필요한 각종 분야에서 eLoran 데이터 채널의 활용이 가능하다. 현재 우리나라는 GNSS를 보완하는 위치 항법 시각(PNT) 시스템으로써 2018년 정상 운용을 목표로 eLoran 시스템 구축 사업을 진행하고 있다.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.193-197
• /
• 2009

In this paper, the EM wave absorber was designed and fabricated for improvement of Wireless LAN environment at 2.4 GHz. We fabricated several samples in different composition ratios of Sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Sendust and CPE was searched as 80: 20 wt.% by experiments and simulation Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the EM wave absorber was fabricated based on simulated data. Simulated and measured results agreed well. As a result, the developed EM wave absorber with thickness of 3.25 mm has absorption ability of 19 dB at 2.4 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.7
• /
• pp.449-458
• /
• 2014

In the context-aware services, localization is an important technical element. Due to the easy to use and low cost, it was widely enabled with RF properties such as RSSI. However, RSSI is known to be not appropriated for indoor localization, because it tends to show big variance in time and is greatly effected with the multipath. This paper proposes a distance estimation process and its constituted methods for indoor localization, by making use of the other WLAN's RF property, CSI(Channel State Information). Firstly we define a comprehensive localization process, and suggest a calibration algorithm of environment factors in the path loss propagation model. Then, by implementing them with a commercial WLAN module, an the proposed process and methods are evaluated in terms of usefulness.