• Journal of the Korean Geotechnical Society
• /
• v.16 no.2
• /
• pp.13-22
• /
• 2000

서해안에 위치한 특정 연구현장에서 연약지반의 압밀거동을 파악하기 위한 소산시험을 포함한 콘관입시험을 수행했다. 연구현장에서 시험시공으로 적용한 연약지반개량공법으로는 압성토공법, 두 종류의 페이퍼드레인 공법, 팩드레인 공법이었으며 각각의 공법들에 있어 현장에서의 지반개량에 따른 압밀거동을 판정하기 위해서 적용되었다. 콘관입시험은 근본적으로 지반개량 전과 후에 보링, 표준관입시험, 압밀시험과 함께 수행되었다. 실내실험과 피조콘관입시험을 비교한 결과, 연약지반의 표층에서는 상당한 지반개량효과가 있었으나 표층아래 심층지반에서는 그렇치 않았다. 그리고 지반개량 후, 10개월이 지난 시점에 압밀시험과 소산시험 결과를 통하여 분석한 수평압밀계수는 압성토 방법을 제외한 3가지 개량공법을 적용한 지점에서 압밀계수는 감소하여 개량효과를 간접적으로 판단할 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.287-292
• /
• 2001

당과 같은 실내 음향 문제는 강당의 사용자와 관리자의 주관적인 평가가 배제되기 힘든 것이므로 문제를 개선하기 위해 물리적 측정이나 실험, 해석 등을 통한 다각적인 정량적 분석 자료를 산출하는 과정이 선행되어야 한다 이를 위해 본 논문에서는 기존의 강당에 대한 고유 음향 특성-잔향시간, 명료도, 음압레벨-을 실험과 컴퓨터 시뮬레이션을 통해 얻어 음향 분포를 파악하고, 현재 설치되어 있는 스피커의 지향성 및 위치 등에 따른 음향 특성을 알아보았다. 대표적인 음향평가 지수인 잔향 시간은 랜덤노이즈를 음원으로 사용하여 음향측정을 수행하였으며, 이 결과를 시뮬레이션과 비교함으로써 컴퓨터 시뮬레이션의 신뢰성 또한 검토하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.142-145
• /
• 2016

본 논문은 기존의 RFID 감지 시스템에서 더 나아가 다수의 RFID 클러스터의 협업 및 RFID가 부착된 객체들 사이의 관계를 통하여 객체 추적이 가능한 시스템을 제안한다. 서버는 다수 클러스터와의 통신으로 모든 객체의 데이터를 관리하며 클러스터는 객체의 RFID가 감지되는 경우에 객체의 데이터를 얻어 서버에 전송한다. 이러한 서버와 클러스터의 상호작용을 통해 감지된 클러스터의 위치를 파악하여 객체 추적이 가능하다. 만약 RFID를 감지하는 데 있어 문제가 발생할 경우, 객체 관계를 활용하여 해결한다. 얻은 데이터의 신뢰도가 낮더라도 RFID가 감지된 상황에 따라 가진 데이터를 기반으로 객체는 싱글과 그룹 관계로 결정되며 시간이 지남에 따라 그룹 관계를 싱글 관계로 바꾸어 모든 객체를 분별할 수 있도록 한다. 실제 제한된 실내 공간을 선정해 이를 기반으로 시뮬레이션 프로그램을 구현하여 이 시스템의 효율성을 확인하였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.423-430
• /
• 2009

본 논문에서는 ISO-9705 공간의 2/5 스케일 축소모형에 대한 화재 실험에서 측정된 고온 상층부의 연소가스 농도를 혼합분율 개념을 도입하여 분석함으로써 환기부족 상태의 실내화재에서 발생되는 연소생성물의 특성을 파악하고자 한다. 화재실 내부 고온 상층부의 두 지점에서 측정된 잔존 탄화수소, 일산화탄소, 이산화탄소, 산소, 수트(soot) 등의 성분비를 혼합분율의 함수로 내어 분석하였다. 또한 탄화수소 연료의 이상적인 반응에 근거한 상태 관계식과 비교함으로써 환기부족 화재에서 혼합분율 모델의 적용성을 분석하였다. 혼합분율 분석을 이용함으로써 측정된 수많은 데이터들을 화재 크기나 측정 위치에 상관없이 하나의 파라미터에 대해서 정리하여 전체적으로 분석할 수 있었다. 또한 혼합분율 분석에서 수트를 고려하는 것이 분석의 정확성을 크게 향상시킴을 확인할 수 있었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.205-206
• /
• 2023

This paper presents a new method for indoor localization track workers in construction sites. While GPS and NTRIP are effective for outdoor positioning, they are less accurate when used indoors. To address this issue, the proposed method utilizes Aruco markers to measure the distance between workers and the markers. By collecting data values, the location of each worker can be determined in real-time with high accuracy. This approach has the potential to enhance work efficiency and safety at construction sites, as it provides more precise indoor positioning compared to conventional methods, leading to improved work efficiency.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.6
• /
• pp.257-268
• /
• 2006

To determine the faults of ceramic cup it is proposed to use pseudo reverberation time concept estimated by impact test in room. Schroeder curves estimated from impact test for a cup with small crack and without one are utilized to estimate pseudo reverberation time. Pseudo reverberation times are compared and discussed according to a sort of impact hammers and impact points and also boundary conditions. As a result. proposed method is proved to be very useful to detect the existence of faults for candidate cups.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2018

AGVS (Automated Guided Vehicle System) is a core technology of logistics automation which automatically moves specific objects or goods within a certain work space. Conventional AGVS generally requires the in-door localization system and each AGV equips expensive sensors such as laser, magnetic, inertial sensors for the route recognition and automatic navigation. thus the high installation cost is inevitable and there are many restrictions on route(path) modification or expansion. To address this issue, in this paper, we propose a cost-effective and scalable AGV based on a light-weight pattern recognition technique. The proposed pattern recognition technology not only enables autonomous driving by recognizing the route(path), but also provides a technique for figuring out the loc ation of AGV itself by recognizing the simple patterns(bar-code like) installed on the route. This significantly reduces the cost of implementing AGVS as well as benefiting from route modification and expansion. In order to verify the effectiveness of the proposed technique, we first implement a pattern recognition algorithm on a light-weight MCU(Micro Control Unit), and then verify the results by implementing an MCU_controlled AGV prototype.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.425-430
• /
• 2017

RFID is a technology that uses radio frequency to read information in tags attached to objects or people. Because it reads the information without contact when tracking the location using tags in a RFID system, there can be errors between the actual position and measured position. In this paper, three methods (the method of radiation pattern, the method of the median value, and the method using both the radiation pattern and median value) are proposed to identify the location of objects or people using the RFID technique. The location identification system based on RFID was constructed and tags were arranged in a square pattern. The real location and experimentally predicted location of an object containing a reader were compared to confirm the error. Instead of the existing papers that obtained the approximately location of a reader by calculating the center of gravity of all tags read by that reader, in this study, the predicted location was obtained by the median value and the radiation pattern. This study validated which method was the most efficient among the three methods proposed in this paper through the data of the read tags. As a result, the method of the median value had the smallest error among those assessed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.1
• /
• pp.66-77
• /
• 2006

In this paper, we researched the searching and tracking locations of a home resident using ON/OFF switches and sensors and designed a remote monitoring system. As an implementation environment, this system is developed on the base of the distributed object group framework we have developed from previous works. In order to trace the moving locations of a home resident, we firstly showed a home structure which attaches ON/OFF switches and sensors to home appliances and indoor facilities being fixed in home. Whenever a home resident opens/closes these objects, the signals operated from ON/OFF switches and sensors are sent to a home server system. In this time, the real locations of ON/OFF switches and sensors that the signals are being occurred must be the current location that he/she stays. A home server system provides the functionalities that map the real location of a resident in home to virtual location designed on remote desk-tops or terminals like PDAs, and that construct a healthcare database consisted of moving patterns, moving ranges, momentum for analyzing the given searching locations and times Finally, this system provides these information for remotely monitoring services.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.18-24
• /
• 1999

Liquid ramjet combustor is closely connected with complex phenomena due to a series of processes such as intake air, spray, mixing, and combustion. The present numerical experiments were peformed to investigate these flow characteristics for two and three dimensional liquid ramjet combustor. Grid system was made with three domains: intake region where air is supplied and fuel is injected, combustor and nozzle region, and exit atmosphere region. The numerical results showed that two and three dimensional flow patterns in recirculation region of combustor were significantly different each other and spray model was necessary to predict correctly the chemical reaction flow characteristics. Numerically examined for two different location of fuel injector, one is located on the bottom position of curved intake and the other is located on the top position. We found that bottom position of fuel injector is better than top position because fuel influx to the recirculation region which is need to sustain chemical reaction is more than the latter.