• Spatial Information Research
• /
• v.22 no.6
• /
• pp.33-43
• /
• 2014

As the number of people who live indoor space has been increased, the interest in 3D indoor spatial information has been grown. Object-Oriented 3D indoor space modeling including indoor spatial information has performed in level of detail 4, and modeling data is able to be constructed based on various raw data which are as-built drawing, laser scanning, BIM data, and camera. 3D indoor space modeling has been worked based on established indoor space modeling process, and the result can be used for various application fields such as indoor space pedestrian navigation, facility management, disaster management, and so on. However, the modeling process has limitations to perform indoor space modeling efficiently, because the process is complicated and wastes time at modeling work. In this paper, we propose evaluation on practical use of raw data for 3D indoor space modeling purpose on supporting efficient indoor space modeling through analyzing the established process. Therefore, we define the requirements to evaluate the practical use of raw data and propose the verification method. In addition, as-built drawing which has been used in Seoul 3D indoor space modeling project will be applied to proposed method as a raw data.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.3.2-6
• /
• 1998

본 논문에서는 실측된 실내 충격 응답을 모델링하여 실내 잔향 필터 설계를 시도하였다. 급강하법(steepest descent method)을 이용하여 측정된 실내 충격 응답을 4개의 콤 필터(comb filter)와 2개의 올패스 필터(allpass filter)로 이루어진 잔향 필터로 모델링하여, 잔향 필터의 계수를 결정하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.163-164
• /
• 2011

본 논문에서는 다양한 가스 센서들을 이용하여 실내 공기 질을 측정, 수집하고 실시간으로 모니터링할 수 있는 센서 네트워크와 이를 효과적으로 사용자들에게 인식될 수 있도록 하기 위하여 빌딩 정보 모델링을 활용한 시스템을 제안한다. 기존 실내 공기질 모니터링 시스템은 휴대용 단말기 형태이거나 모니터 상으로 센서의 위치와 측정값을 보여주는 정도로서 사용자들이 쉽게 건물 내 공기질의 상태를 파악하는 것이 어려웠다. 따라서, 본 시스템에서 제안하는 방법은 건축물의 실내 공간을 모델링하고 실제 센서가 설치되어 있는 위치를 모델링 자료와 동기화시켜 사용자들이 직관적으로 실내 공기질을 모니터링할 수 있도록 하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.269-280
• /
• 2022

With property values of buildings rising, interior construction works are also increasing globally. Interior construction technology has developed into building information modeling(BIM) that can estimate and integrate material quantities. Two-dimensional(2D) drawings and three-dimensional (3D) modeling are becoming a trend owing to the demanding on-site cost and process. 2D drawings and 3D modeling have both advantages and disadvantages that give rise to defects during interior construction work. The field problems, 2D drawings, 3D modeling, and preliminary risk factors of interior construction work were analyzed to identify real problems. Based on the problem analysis, various problems were derived, such as (1) communication with purchasers, (2) communication with workers, and (3) comprehension of the drawings. In this study, a checklist for quality improvement of interior construction was proposed to address the aforementioned issues.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.426-435
• /
• 2002

In this paper we present an indoor propagation model for indoor wireless LAN service in the ISM band. We primarily use a 3D ray tracing as well as a patch scattering model in order to take into account the indoor fixtures. Therefore input parameters such as indoor environment parameters and antenna's types, polarizations are considered. As the results, we present fading characteristics and rms delay spread from time delay spread. In order to investigate the accuracy of the presented model, comparisons of predictions with measurement and simulations are performed in indoor wireless LAN service environments. The results show that measurements and simulations are very similar. Therefore in this paper, the effect of presented indoor propagation model is confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1847-1853
• /
• 2011

Analysis of an indoor propagation channel has conventionally used the ray-tracing method. But, in this paper, we had modelling the channel for three dimensional indoor structure by the finite difference time domain method for three dimensional full wave analysis. An excitation signal of the FDTD method used plane wave. The plane wave was excited using the total field/scattered field method. And absorbing boundary condition used the perfectly matched layer method with 7 layers. An living room for the simulation of indoor channel modeling is surrounded the wall that be composed of the wood, the conductor, the glass and concrete. When there are furniture in the living room or not, it were simulated, respectively. As simulation results, we could identify the fading effect of multipath at indoor propagation environment, calculated mean excess delay and rms delay spread for the receiver design.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.701-711
• /
• 2009

The inner space of building is increasingly becoming complex as urban activities increase in variety, and the actual space size also increases. This trend necessitate the utilization of three dimensional position information within the inner space of buildings. Standard GIS web service technology and visualization technology are applied to 3D inner space building data to share these information for better decision making in building related applications such as fire evacuation, facilities management and market analysis. This study aims to effectively model and visualize the three dimensional space of building interiors in the GIS aspect, and to be able to share the information through standard GIS web service. The various elements of inner model was assigned and stored into pre-designed spatial database tables respectively. GIS web server was then configured to service the database which was populated with 3D inner model data. On the client side, 3D visualization modules was developed using a 3D graphic rendering S/W engine.

• Korean Journal of Remote Sensing
• /
• v.32 no.5
• /
• pp.511-527
• /
• 2016

We propose a rotating stereo frame camera system to acquire indoor images with a low cost. For experiments, we selected a test site and acquired images using the proposed system and control points using a total station. Using these data, we generated various indoor 3D models using commercial photogrammetric software, PhotoScan. We then performed qualitative and quantitative analysis of the generated indoor 3D models to investigate the possibility of the indoor modeling using the proposed system. From the results, it is confirmed that the generated indoor models using the proposed system can be applicable to the services not inquiring high accuracy.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.493-498
• /
• 2006

본 논문에서는 3D 파노라믹 가상 환경 생성을 위한 투영기반 메쉬 모델 생성 기법을 제안한다. 제안된 메쉬 모델 생성 기법은 멀티뷰 카메라를 이용해 다수의 시점에서 얻은 실내 환경의 3D 데이터로부터 메쉬 모델을 생성한다. 먼저 미리 보정된 카메라 파라미터를 이용해 입력된 임의의 3D점 데이터를 여러 개의 하위 점군으로 분할한다. 적응적 샘플링을 통해 각 하위 점군으로부터 중복되는 점 데이터를 없애고 새로운 점군을 생성한다. 각각의 하위 점군을 Delaunay삼각화 방법을 통해 메쉬 모델링하고, 인접한 하위 점군의 메쉬들을 통합하여 하나의 메쉬 모델을 생성한다. 제안된 메쉬 모델링 방법은 점군의 분할을 통해 각 부분의 메쉬 모델을 독립적으로 생성하므로 실내 환경과 같은 넓은 영역의 모델링에 알맞다. 또한, 적응적 샘플링을 통해 3D 데이터가 갖는 깊이 정보의 특징을 보존하면서 메쉬 데이터의 크기를 줄인다. 생성된 가상 환경 모델은 가상/증강현실 응용 어플리케이션 등에 적용이 가능하다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.10a
• /
• pp.42-45
• /
• 1996

잔향시간이 긴 실내의 전달함수의 모델링에 있어서 , 일반적인 플 밴드 MA 모델에 기초한 적응 필터를 이용한 경우에는, 많은 필터 차수를 필요로 하고 적응 시간이 길어지는 문제점이 있다. 본 논문에서는 필터 차수를 감소시키고 수렴 특성을 향사시키기 위해서, 각 입출력 신호를 몇 개의 주파수 대역으로 나우어서 각각의 주파수 대역에 대새서 적응 처리 과정을 행하는 서브밴드 MA 모델을 이용한 적응디지털 필터 처리 방법을 제안한다. 컴퓨터 시뮬레이션 서브밴드MA 모델을 이용한 디지털 적응 필터 처리과정의 유효성을 나타냈었다.