• Korean Architects
• /
• no.6 s.386
• /
• pp.38-61
• /
• 2001

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.22 no.6
• /
• pp.417-423
• /
• 1993

• Journal of Soil and Groundwater Environment
• /
• v.9 no.2
• /
• pp.1-10
• /
• 2004

The purpose of this study is to evaluate a laboratory test on arsenic reduction efficiency for ARD (Acid Rock Drainage) using limestone and apatite, and to design an apatite drain system. As a result of the laboratory test, results of this study show that pH, arsenic removal ratio, and dissolution amount of limestone ＆ apatite are inversely proportional to flow rates, and apatite removes 100％ of arsenic at 0.6 ml/min/kg flow rate. It is supposed that dissolution rate of apatite is ten times higher than that of limestone. The arsenic compounds are assumed to be Johnbaumnite, and/or Ca-arsenic hydrate. According to the results of the laboratory test, apatite drain system is designed as follow; Sixty two tons of apatite will be needed per one year and six months, and the precipitates will be removed from the precipitation pond per 3 months.

• Korean Institute of Interior Design Journal
• /
• no.22
• /
• pp.23-29
• /
• 2000

As the environmental paradigm is the major issue today, the guideline of the ecological design in the interior architectural field is needed. One on the knowledge necessary to plan the ecological interior architecture as a designer is the spectification related factors for planning, which should be applied in materialistic matters. In this paper, the knowledge of materials and products needed to design interior space considering the ecological factors is studied. And, a guideline for the eco-design is investigated for the expression of the environmentally friendly perception.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.118-119
• /
• 2003

휴대용 통신기기의 발달로 인해 실내 및 실외 환경에서 높은 성능을 발휘하는 LCD 소자가 요구되고 있다. 후면광원을 사용하는 투과형 LCD는 실내 혹은 어두운 곳에서 높은 휘도와 명암대비비를 가지는 반면 실외나 밝은 곳에서는 높은 휘도 및 명암대비비를 보일 수 없다. 그에 반해 반사형 LCD는 주변광을 광원으로 사용하므로 실외 혹은 밝은 곳에서의 전기광학 특성이 양호한 장점이 있지만 실내 및 어두운 곳에서의 사용이 제한된다. (중략)

• Korean Architects
• /
• no.4 s.324
• /
• pp.110-113
• /
• 1996

대한주택공사에서는 지역 여건에 맞는 쾌적한 단지조성과 최대한의 실내 공간 확보를 위한 주거환경개선사업의 일환으로 인천 송현지구에 대한 현상설계경기를 실시, 지난 2월 15일 무영종합건축(안길원+손광민)안을 최우수작으로 선정, 발표했다. 총 8개 사무소에서 작품을 제출한 이번 설계경기의 우수작에 장건축(오택길)안이, 가작으로는 다원건축(김영택)안이 각각 선정됐다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.936-942
• /
• 2019

Autonomous driving of drone indoor must move along a narrow path and overcome other factors such as lighting, topographic characteristics, obstacles. In addition, it is difficult to operate the drone in the hallway because of insufficient texture and the lack of its diversity comparing with the complicated environment. In this paper, we study an autonomous drone navigation using Convolution Neural Network(CNN) in indoor environment. The proposed method receives an image from the front camera of the drone and then steers the drone by predicting the next path based on the image. As a result of a total of 38 autonomous drone navigation tests, it was confirmed that a drone was successfully navigating in the indoor environment by the proposed method without hitting the walls or doors in the hallway.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.178-180
• /
• 2006

실내 위치 환경에서 많이 사용되고 있는 삼각 측량 기법은 TOA(Time of Arrival) 신호를 사용하기 때문에 건물의 외벽이나 창의 메탈 성분 같은 장애물로 인한 전파의 반사와 회절, 분산 등의 NLOS(Non-Line-Of-Sight) 환경으로 인하여 정확한 위치추적이 어렵다는 문제점이 있다. 따라서 본 논문은 이러한 문제점을 줄이기 위해서 Anchor로부터 수신되는 TOA의 range measurement의 표준 편차를 측정하여 LOS와 NLOS를 구분하고, 발견된 NLOS를 보정하는 방법에 대하여 연구한다. 또한 위치 정확도를 높이기 위하여 칼만 필터를 수행하여 이동객체의 위치를 생성하는 실내 환경에서의 위치 추적 시스템을 설계한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.1254-1257
• /
• 2017

LoRa는 저전력 및 장거리 작동을 위해 설계된 새로운 ISM 대역 무선 기술이며, LoRaWAN은 LoRa에서 정의된 광역 네트워크 프로토콜이다. 본 논문에서는 실제 환경에서 LoRaWAN 기술의 통신 성능을 검증하는 것을 목표로 한다. 이를 위해, 캠퍼스 내에 LoRaWAN 실험을 위한 실제 테스트 베드를 구축했다. 사용자들이 사용하는 실제 환경을 만들기 위해 통신 게이트웨이를 실내에 설치하였고, 캠퍼스의 실내외 다수 위치에서 데이터를 P2P 방식으로 게이트웨이에게 전송한다. 실험에서는 대역폭, 코딩 속도, 확산 계수 및 전송 전력을 변화시켰으며, 성능 검증을 위해 신호대잡음비와 패킷 전송률을 측정하여 결과를 분석한다.

• Korean Institute of Interior Design Journal
• /
• v.16 no.4
• /
• pp.119-126
• /
• 2007

A prototype design process visualization and guidance system, is being developed. Its purpose is to visualize the design process in more intuitive manner so that one can get an insight to the complicated aspects of the design process. By providing a tangible utility to the design process performed by the expert designers or guided by the system, novice designers will be greatly helped to learn how to approach a certain class of design. Not only as an analysis tool to represent the characteristics of the design process, the system will be useful also for learning design process. A design ontology is being developed to provide the system with a knowledge-base, representing designer's activities associated with various design information during the conceptual design process, and then to be utilized for a computer environment for design analysis and guidance. To develop the design ontology, a conceptual framework of design activity model is proposed, and then the model has been tested and elaborated through investigating the nature of the early conceptual design. A design process representation model is conceptualized based on the ontology, and reflected into the development of the system. This paper presents the development process of the visualization system, modeling of design process ontology, and how the system could be utilized for the analysis and learning of conceptual design methods using computer mediated design support environment.