• Journal of the Korean GEO-environmental Society
• /
• v.14 no.1
• /
• pp.61-68
• /
• 2013

This paper presents an experimental results on the environmental characteristics of waste tire. Experimental program includes a set of laboratory leaching tests and field pilot test for leachate analysis. Laboratory tests were conducted to illustrate how properties such as TOC, pH, turbidity and Zn change with tire sizes and drain conditions. In field pilot test, water samples were collected form a drainage system installed below the tire-reinforced retaining wall and analyzed for chemical quality. Laboratory leaching tests performed on various particle sizes of waste tire indicated that as tire size is increased, the concentration of leachate is decreased. In continuous flow column tests, the concentration of leachate decreased with the number of exposure periods or pore volumes flushed through the waste tire. However, during pause flow column tests, the concentration of leachates were increased with time. Field monitoring of effluent indicated that no significant adverse effects on ground water quality had occurred over a period of 12 months.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.203-206
• /
• 2006

본 논문에서는 폐타이어를 지반보강재로 재활용하는 경우 배수조건에 따른 용출특성을 알아보기 위하여 실내실험을 실시하였다 배수조건과 비배수조건으로 연속식 용출시험을 수행하여. 유출수의 pH, 탁도, TOC, Zn 농도를 분석하였다. 실험결과 배수조건인 경우 시간이 경과할수록 용출 농도가 감소하여 주변 환경에 큰 영향을 미치지 않을 것으로 판단되나, 비배수 조건인 경우 용출 농도가 증가하는 현상을 발견할 수 있었다. 배수조건은 폐타이어가 지하수위 위에 존재하는 경우이며, 비배수조건은 폐타이어가 지하수위 아래에 존재하는 경우에 해당한다. 특히, 폐타이어가 지하수위 아래에 위치하는 경우 지오텍스타일의 클로깅 등으로 인하여 배수가 원활히 되지 않을 경우에는 주변환경에 큰 영향을 미칠 것으로 예상되며 이에 대한 각별한 주의가 필요할 것이다.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.2
• /
• pp.155-162
• /
• 1992

In order to extend the releasing period of granular formulation to approximately 20 days, the KC-6620-adsorbed granules were formulated with carriers and polyethylene glycol as adjuvant. The releasing rates of active ingredient from the formulations were evaluated in aqueous medium. The baked bentonite was found most effective carrier to sustain the release of KC-6620. Due to, however, low releasing rate of active ingredient after 20 days, bentonite formulation appeared to be of no practical for the short-term sustained release of KC-6620. The increased pore volume of bentonite granular formulation by adding pyrophyllite increased remarkably the released amount of KC-6620 from bentonite-pyrophyllite(4 : 6) granule up to 85% of total active ingredient incorporated. Addition of polyethylene glycol to the bentonite-pyrophyllite granule further increased the releasing rate of KC-6620. With KC-6620 content in the bentonite-pyrophyllite(4 : 6) granule, the releasing rate of active ingredient was markedly reduced.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.2
• /
• pp.5-12
• /
• 2001

The physical characteristics and contaminant level of the dredged material generated by the channel maintenance and water quality improvement was analysed in a series of the study of the beneficial uses of dredged material in harbor. Dredged materials were sampled at Kunsan, Kohyun, Samchunpo, and Pohang Harbors and tested in the laboratory(leaching Test). From the experimental results, the specific gravity does not shows large differences, while almost grains are composed of silts and oyster shells except Pohang harbor containing gravels. The COD release rate and ignition loss is high in Kunsan dredged materials because of the watershed pollutants loads. The nutrient release rate is also relatively high. The release concentration of the heavy metals shows the highest values on Zn, Pb, Cd, Cu constituents at Kohyun, Kunsan, Samchunpo, Kunsan, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.42-50
• /
• 2006

역들의 공간적 분포가 불균질하고 역의 크기가 큰 역암의 경우 암석 전체를 대표하는 물성치($E_m,\;c,\;\Phi$ 등) 구하기 위해서는 매우 큰 시험기기가 필요하다. 따라서 커다란 역을 포함하는 역암의 경우 직접 암석실내시험을 통한 물성치 산정은 현실적으로 거의 불가능하다. 이러한 문제를 극복하기 위하여 이 연구에서는 개별요소법을 이용하여 역암의 물성치를 산출하는 방법을 제안한다. 그 방법은다음과 같다. (1) 역암내의 역의 물성과 기질부의 물성을 각각 실내실험을 통하여 파악한 후 이들 (2) 두 물질의 거동양상을 구현할 수 있는 개별요소집합체의 개별요소간의 물성을 결정한다. (3) 역의 함량, 크기 모양 공간적 분포양상등의 역암 조직과 유사한 개별요소 수치해석시료를 만든 후, (4) 이를 수치 해석실험 (이축압축실험)에 사용한다. 이러한 수치해석실험을 통해 현재까지 만들어진 결과는 다음과 같다. 첫째, 역의 강도가 기질의 강도보다 높은 역암의 경우, 역의 양이 증가할수록 일축압축강도, 내부 마찰각, 점착력이 증가하지만 증가 양상은 선형이 아니다. 탄성계수의 경우 역의 양과 상관 없이 변화하지 않는다. 둘째, 역과 기질 사이 표면의 점착력이 약할 경우 이러한 표면에서 최초 미세 균열이 형성되기 시작하므로 이 점착력은 물성치를 산출하는 중요한 인자이다. 따라서, 향후 이에 대한 자세한 연구가 필요하다고 판단된다. 결론적으로,설계 또는 시공시 직접시험에 의한 물성치의 파악이 어려운 역암 또는 직접시험을 위해 대량의 시료를 필요로 하는 함력 미고결지층, 핵석층, 풍화암과 같은 시료의 물성치는 별도로 측정된 물성들 (예, 역과 기질)을 이용한 개별요소법을 통해 구할 수 있다.로 나타났다.TEX>, DIN/DIP비 표층수 $23.91\pm3.42$, 저층수 $23.43\pm3.38$이었으며, 전반적으로 해역별 수질기준 I등급 내지는 II등급을 유지하고 있었고, 공간적으로는 외해측으로 갈수록 외해수와 혼합 확산되어 양호한 수질을 나타내었다. 장기적인 변동특성은 세그룹으로 구분되어진다.기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.im80%$로 계산되었다. 열형광선량계로 측정된 방사선량은 각각 1.8, 1.2, 0.8, 1.2, 0.8 (70 cm 거리) cGy로 측정되었으며, 환자의 복부 표면에서의 서베이메터를 이용한 측정량은 10.9 mR/h였다. 차폐구조물의 사용 시 전체 치료 동안에 태아선량은 약 1 cGy 정도로 평가되었다. 결론 : AAPM Report No.50의 자료에 따르면, 임산부의 방사선 치료 시 태아의 방사선 피폭선량은 5 cGy 이하일 경우에 방사선 피폭에 따른 태아의 위험이 거의 없는 것으로 제시되고 있다. 본원에서 차폐 구조물을 설치하였을 경우에 측정된 태아선량은 약 1 cGy로 측정되었고, 고안된 차폐구조물은 태아에 도달하는 방사선량을 감소시키기에 적합한 설계임이 입증되었다. 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.159-170
• /
• 2003

In this study, the mixed design of grout with hish strength.high permeation.high durability and environmental stability as the state of the art in material field was performed. Also, the subjects of grouting, grouting effects for ground conditions, and environmental effects were analyzed. According to these results, the fundamental data will be suggested as a design of grouting in the field application. The physical, mechanical and chemical characteristics with particle shape of the grouts were analyzed. Then, the gel-time of grouts, which is essential for workability and permeation range, were controlled. Also, the laboratory model grouting tests were performed to find the characteristics of solidification, permeation and durability with grouts. The ordinary portland, slag and microcement which have been used in the construction field were evaluated fur the environmental effects. To find the leaching of $Cr^{6+}$characteristics in cement grouts, $Cr^{6+}$ leaching tests were performed for the raw materials. Also, the results of leaching test were shorn by surrounding environment. Then, the unconfined compression strength tests were performed with the homo-gel samples, and the amount of changed $Cr^{6+}$ was measured by curing solution.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.4
• /
• pp.29-37
• /
• 2013

In order to recycle both water sludge and waste fishing net(WFN), it was investigated in this paper the engineering characteristics of mixtures that consisted of different content of water sludge(0%, 10%, 30%, 50%) and reinforced with waste fishing net(unreinforced, untreated WFN, glue treated WFN). WFN or glue treated WFN(1&2 layers) was also added to the mixture to improve the interlocking between the soil particle and WFN. Several series of laboratory tests such as compaction test, triaxial test, oedometer test, permeability test and leaching test were carried out. The experimental test results indicated that, as water sludge content increases, maximum dry unit weight, cohesion, friction angle, and permeability of the mixture decrease, while optimum moisture content, compression index, expansion index and compressibility increase. For the case of reinforced mixture, its cohesion and friction angle are increased due to the inclusion of WFN and glue treated WFN. Leaching result of mixture was satisfied with standard of ministry of environment.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.4
• /
• pp.29-35
• /
• 2002

In order to establish the applicability of organic soil as Earthwork Materials, this research conducts a battery of laboratory tests using two kinds of test materials. The test material A, a mixture of sand and organic soil, and the test material B, a mixture of granite soil and organic soil varying the proportion of organic soil through 5%, 10%, 20%, 30%, 40%, and 50% are used. Continuous column leaching tests of the test materials A and B indicate that their COD value is substantially smaller than that of pure organic soil, the COD value of the early leached water slightly exceeds the standard level for leached water. The COD value after 4 hours of leaching becomes very small. The mixed soil of sand and organic soil is considered usable as embankment materials when the proportion of organic soil is up to 40% with the corresponding concentration ratio of organic contents is less than 11.3%. Similarly, the mixed soil of granite soil and organic soil is considered usable as earthwork materials when the proportion of organic soil is less than 30% with the corresponding concentration ratio of organic contents is less than 16.4%.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2021

In this study, a study related to laboratory and pilot test were performed to use an environmental soil stabilizer developed to induce a hardening reaction similar to that of Ordinary Portland Cement (OPC) by using industrial by-products of blast furnace slag and the combustion ash of a circulating fluidized bed boiler as the main material. For this, specimens were prepared using liquid A of sodium silicate and silica sol, and liquid B of an environmental soil stabilizer (or OPC), and laboratory tests were performed to analyze the strength and environmental characteristics. And pilot test was performed on the aging reservoir, field permeability test and electrical resistivity survey were performed in the field to analyze the applicability. As a result of the laboratory test, the homo-gel compressive strength of the chemical injection material using the environmental soil stabilizer as liquid B was about 2.88 to 3.23 times greater than that of OPC. In addition, the elution amount of most heavy metals was lower than that of OPC, and the survival rate in the fish, acute toxicity test was 100%. Therefore, when judged based on the results of the laboratory test, it was analyzed to be superior to OPC in terms of strength and environment. In the results of the pilot test in the aging reservoir, when the environmental soil stabilizer was reinforced with liquid B of the chemical injection material, the coefficient of permeability in the aging reservoir decreased to 1/50 level. In addition, as a result of the electrical resistivity survey, it was analyzed that the electrical resistivity inside the aging reservoir increased as time passed, the saturation zone disappeared, and the overall reinforcement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.264-271
• /
• 2002

Nitrogen releasing characteristics of polymer-coated urea(PCU) that made acrylic synthetic resins were studied in incubated soil, water and paddy soil. Also, their correlations and degradation patterns of coating material were tested. Releasing rate of nitrogen from PCU decreased with increasing coating rate. N001(coating rate 8.5%) and N003(coasting rater 6.3%) were low releasing amount at the early stage, whereas N005(coating rate 4.8%) was released over 80% within 20 days. Relationship of the releasing rate between incubated soil($25^{\circ}C$) and paddy soil could be described as follows : $Y=-0.0011X^2+2.2931X-50.264(R^2=0.9884)$ for N001, $Y=-0.0016X^2+1.1587X+5.5064(R^2=0.9805)$ for N003 and $Y=-0.03X^2+6.499X-243.22(R^2=0.9422)$ for N005, respectively (Y: release rate at field condition, X: experiment period). Relationship of the releasing rate between incubated water($30^{\circ}C$) and paddy soil can be described as follows : $Y=0.0011X^2+2.2601X-25.329(R^2=0.9884)$ for N001, $Y=-0.0306X^2+4.4994X-76.307(R^2=0.955)$ for N003 and $Y=-0.0164X^2+3.7764X-108.22(R^2=0.9422)$ for N005. After 150 days, coating materials of N001, N003, and N005 in incubated soil were degraded approximately 23%, 22% and 15%, respectively. Also The scanning electron microscope examination of coating material revealed that particle surface became gradually shattered with the time after the soil treatment.