• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.963-974
• /
• 2015

This study was conducted to determine the effects of organic vegetable cultivation on the soil physical properties in 33 farmlands under plastic greenhouse in Korea. We were investigated 5~8 farms per organic vegetable crops during the period from August to November 2014. The main cultivated vegetables were leafy lettuce (Lactuca sativa L.), Perilla leaves (Perilla frutescens var. Japonica Hara), cucumber (Cucumis sativus L.), strawberry (Fragaria ananassa L.) and tomato (Lycopersicon spp.). We have analyzed soil physical properties. The measured soil physical parameters were soil plough layer, soil hardness, penetration resistance, three soil phase, bulk density and Porosity. The measurement of the soil plough layer, soil hardness and penetration resistance were carried out direct in the fields, and the samples for other parameters were taken using the soil core method with approximately 20 mm diameter core collected from each organic vegetable field. Soil plough layer was average 36 cm and ranged between 30 and 50 cm, and slightly different depending on the sorts of vegetable cultivation. The soil hardness was $0.17{\pm}0.15{\sim}1.34{\pm}1.02$ in the topsoil, $0.55{\pm}0.34{\sim}1.15{\pm}0.62$ in the subsoil. It was not different between topsoil and subsoil, but showed a statistically significant difference between the leafy and fruit vegetables. Penetrometer resistance is one of the important soil physical properties that can determine both root elongation and yield. The increase in density under leafy vegetables resulted in a higher soil penetrometer resistance. Soil is a three-component system comprised of solid, liquid, and gas phases distributed in a complex geometry that creates large solidliquid, liquid-gas, and gas-solid interfacial areas. The three soil phases were dynamic and typically changed in organic vegetable soils under greenhouse. Porosity was characterized as range of $54.2{\pm}2.2{\sim}60.3{\pm}2.4%$. Most measured soils have bulk densities between 1.0 and $1.6gcm^{-3}$. To summarize the above results, Soil plough layer has been deepened in organic vegetable cultivation soils. Solid hardness (the hardness of the soil) and bulk density (suitable for the soil unit mass) have been lowered. Porosity (soil spatial content) was high such as a well known in organic farmlands. Important changes were observed in the physical properties according to the different vegetable cultivation. We have demonstrated that the physical properties of organic cultivated soils under plastic greenhouse were improved in the results of this study.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.419-426
• /
• 2015

The purpose of this study is to investigate experimentally the optimum mix design and site application case of soil mixing wall (SMW) method which is cost-effective technique for construction of walls for cutoff wall and excavation support as well as for ground improvement before constructing LNG storage tank typed under-ground. Considering native soil condition in site, main materials are selected ordinary portland cement, bentonite as a binder slurry and also it is applied $1,833kg/m^3$ as an unit volume weight of native soil, Variations for soil mixing wall are as followings ; (1) water-cement ratio 4cases (2) mixing velocity (rpm) 3levels (3) bleeding capacity and ratio, compressive strength in laboratory and site application test. As test results, bleeding capacity and ratio are decreased in case of decreasing water-cement ratio and increasing mixing velocity. Required compressive strength (1.5 MPa) considering safety factors in site is satisfied with the range of water-cement ratio 150% below, and test results of core strength are higher than those of specimen strength in the range of 8~23% by actual application of element members including outside and inside in site construction work. Therefore, optimum mix design of soil mixing wall is proposed in the range of unit cement $280kg/m^3$, unit bentonite $10kg/m^3$, water-cement ratio 150% and mixing velocity 90rpm and test results of site application case are satisfied with the required properties.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.3
• /
• pp.158-163
• /
• 2005

The purpose of this study was to observe the effect on the marine environment by the use of Nano-S. Nano-S was made to apply to improve the red tide bloom. The experiment was performed at round tank with volume of 180 L. Each tank was filled with an aggravated sediment about $14{\pm}1cm$ hight and sea water. The water flow-rate of tank was established on the rate of 6.25 L/hr. Sea water level was fitted to 40 cm, therefore the filled water was about 150 L. The sediment was stabilized during one week. Then the Nano-S and the red mud were added into each tank 0 kg(control), 1 kg(tank A), 2 kg(tank B), 5 kg(tank C) and 10 kg(tank D) each other. The quantity was fulfilled with 0 kg(control), 2.75 kg(tank A), 5.51 kg(tank B), 13.77 kg(tank C) and 27.55 kg(tank D) per square meter of sediment. The experiment was performed during 30 days. Water and sediment samples were collected from each tanks on the before 1hour and after 1, 3, 6, 12 hour and 1st, 3th, 5th, 7th, 10th, 15th, 30th day of the experiment period. The change of water and sediment quality was analyzed before and after applying the Nano-S and the red mud.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.13-24
• /
• 2004

The Marshall mix design method used in Korea, which was described in the design & construction regulation, had been introduced from Japan Highway Cooperation standard guide. Most engineers have thought that it is the major reason that causes pavement distresses. Therefore, there is a need to modify the current Marshall mix design through using the volumetric design concept, which is most widely used in asphalt mix design. The modified mix design determines the preliminary optimum asphalt content at 4% VTM (Voids in Total Mix). If the Marshall properties, which are VFA, VMA, stability, and flow, were satisfied with the requirements, the preliminary optimum asphalt content is determined as the final optimum asphalt content. The modified Marshall mix design considers VMA. while the current Marshall mix design does not consider VMA. By considering the Marshall stability and flow as the criteria instead of design factors, the modified Marshall mix design is able to decrease the errors occurred in Marshall stability test The test was performed to compare the Marshall properties between current and modified Marshall mix design. The left results showed that there was no difference in the Marshall properties, except for VTM. Thus, the modified Marshall mix design can produce the asphalt mixtures with the constant VTM (4%), and it can improve the asphalt mixture quality in Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.296-300
• /
• 1989

This study was carried out to evaluate the effects of clay loam soil, zeolite, and high molecular organic compounds on the improvement of soil physico-chemical properties and soybean yield in a sandy loam soil. Soybean was cultivated from 1987 to 1988. CEC, moisture retention of soil were increased, but soil bulk density and hardness were decreased by soil conditioners. Clay loam soil addition enhanced the soybean yield by 5% at 10ton 10a plot, 7% at 20ton/10a plot. Also zeolite application increased the soybean yield by 6~10%. Effects of soil conditioner application of the 1rst year were greater than that of 2nd year. Some experiments were conducted in laboratory for the effect of soil conditioners on soil physical properties. The nutrient and water holding capacity were highest by K-SAM treatment, but the soil aggregates was most stable by AN-905SH and Primal treatments.

• The Korean Journal of Malacology
• /
• v.25 no.2
• /
• pp.105-112
• /
• 2009

We investigated the degree of obesity, histological development stages of gonads and sexual maturation induction rates of comb pen shell, Atrina pectinata, per the type of micro-algae supplied. Terms of maturation by singular or mixed supply of microalgae, it was found that maturation of the female was the quickest at 60.0% by the Tetraselmis tetrathele (Tet). experiment group followed by 57.1% by the Chlorella ellipsoidea (Chl). experiment group and 16.7% by the Phaeodactylum tricornutum (Pha). experiment group. However, there were no significant differences between Tet. experiment group and Chl. experiment group. As for the male, maturation was the quickest at 60.0% by the Tet. experiment group followed by 16.7% by the Chl. experiment group and 14.3% by the Pha. experiment group. In light of these results, Tet. is concluded to be a very useful feed organism in breeding the mother comb pen shells. Upon completion of the experiment, the sexual maturation induction rate for the female was found to be the highest at 82.0% in the Tet. experiment group followed by 72.0% by the Chl. experiment group, 64.0% by the Pha. experiment group and 58.0% by the mixed micro-algae experiment group. During the period of experiment, the survival rate was the highest at 94.4% by the mixed micro-algae experiment group followed by 90.0% by the Pha. experiment group, 83.1% by the Tet. experiment group and 78.8% by the Chl. experiment group.