• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.36-54
• /
• 1995

The error performance of digital radio signals (i.e., M-ary PSK signal, DQPSK signal, MSK signal, GMSK signal) interfered by impulsive noise and electromagnetic interference (EMI) is analyzed and discussed. In analysis at first, the error rate equations have been derived in an electromagnetic interference plus impulsive noise environment. And then, the error performance has been evaluated and shown in figures as a function of carrier-to-noise ratio, carrier-to-interference ratio, impu- lsive index, gaussian noise to impulsive noise power ratio, and interference index to measure the amount of error degradation in digital radio signals. From the obtained results we have known that in the presence of m-distributed tone interference plus inpulsive noise, the more significant the electromagnetic interference amplitude varies, the more significant performance degradation is produced. The listing the digital radio signals from the most degraded to the least is that DQPSK, GMSK, QPSK and MSK signal. In the constant amplitude tone interference plus impulsive noise environment, the effect of in- terference nearly disappears over about 20dB in CIR. The effect of constant tone interference on error rate performance is reduced more remarkably in the region from 10dB to 15dB in CIR. In both enviroments of m-distributed tone interference and constant amplitude tone interference, the more electromagnetic interference amplitude varies and CIR increases, the more error perfor- mance is improved. But it is found out that the performance can not be improved significantly even the electromagnetic interference becomes weak. This describes that the impulsive noise affects dominantly to the performance degradation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.114-122
• /
• 2016

EIS (Electro interstitial scan) is a non-invasive and simple method to find the physio-pathological information inferred by electric current response with respect to low direct current applied between remote sites of the body. Although a few EIS-based devices for diagnosing diabetes were commercialized, they were not successful in offering clinical validity nor in confirming diagnostic principle. In this study, we measured the voltage responses of diabetic patients and normal subjects with a commercialized EIS device to test the usefulness of EIS in screening diabetes. For this purpose, voltage was measured between pairs of electrodes contacted at both palm, both soles of the feet and left and right forehead above both eyes. After feature extraction of voltage signals, the AUC (area under the curve) between the two groups was calculated and we found that seven variables were appropriately shown above 60% of accuracy. In addition, we applied the k-NN (k-nearest neighbors) method and found that the accuracy of classification between the two groups reached the accuracy of 76.2%. This result implies that the voltage response analysis based on EIS has potential as a diabetics screening method.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.841-852
• /
• 2010

An integrated process control (IPC) procedure is a scheme which simultaneously applies the engineering control procedure (EPC) and statistical control procedure (SPC) techniques to reduce the variation of a process. In the IPC procedure, the observed deviations are monitored during the process where adjustments are repeatedly done by its controller. Because the effects of the noise, the special cause, and the adjustment are mixed, the use and properties of the SPC procedure for the out-of-control process are complicated. This paper considers efficiency of EWMA charts for detecting special causes in an ARMA(1,1) noise model with a minimum mean squared error adjustment policy. And we propose the readjustment procedure after having a true signal. This procedure can be considered when the elimination of the special cause is not practically possible.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.207-210
• /
• 2000

본 논문에서는 신호를 해석하는데 유용한 웨이블렛 변환을 적용하여 장면전환 요소 중 cut과 fade를 검출하는 알고리즘을 제안한다. 제안된 방법은 웨이블렛 저대역 부밴드로부터 각 프레임의 히스토그램을 구한 후 이전 프레임과 현재 프레임사이의 히스토그램 차를 구하여 이 값이 임계값 이상이면 급격한 장면전환(abrut shot transition)인 cut으로 분류한다. 다음으로 페이드인(fade in)이나 페이드 아웃(fade out)등 컷의 지점이 불분명한 점진적 장면전환(gradual scene transition)을 검출하기 위하여 고대역 부밴드에서 추출한 에지성분에 모멘트를 계산하여 인접한 프레임 사이의 변동율을 분석하여 값이 증가하면 페이드 인을 검출하고 반면에 감소하면 페이드 아웃을 검출하게된다. 성능평가를 위하여 실제의 비디오 분할에 적용한 결과 웨이블렛 적용 방법론이 매우 높은 Precision을 갖는다는 것을 알 수 있으며 윤곽정보에 모멘트 정보를 더함으로써 기존의 방법보다 정확한 페이드(fade) 구간을 검출할 수 있었다.

• 전기의세계
• /
• v.36 no.9
• /
• pp.673-682
• /
• 1987

본고에서는 교류전원측에 발생하는 고조파를 제거하기 위한 정지형 능동전력필터에 관해 기술하였다. 능동필터는 기존의 L-C필터와는 달리 능동소자인 전류원을 사용하여 계통으로 직접 고조파보상전류를 주입합으로써 고조파를 상쇄시키는 장치이다. 이러한 정지형 필터가 갖는 특성을 요약하면 다음과 같다. 1. 정지형 필터는 한대만으로 다수대의 L-C 수동필터를 부착한 것과 같은 효과를 발휘한다. 2. 필터가 전류를 주입한 만큼 고조파를 제거시키게 되므로 과부하로 되는 일이 전혀 없다. 3. 능동필터내 전류형 인버터에 인가되는 신호를 조작해서 제거하는 고조파의 차수들과 양을 얼마든지 가변시킬 수 있다. 4. 정지형 필터는 수동필터의 경우처럼 주파수와 L및C의 변동에 따라 고조파 억제특성이 변하지 않는다. 이상과 같은 장점을 지니는 정지형 필터는 설비비의 면에서도 수동필터보다 불리하지는 않을 것이다. 더구나 저렴한 대용량의 반도체소자들이 지속적으로 개발될 것으로 미루어 다음 세대의 교류필터로서 각광받을 것이다. 그리고 현존하는 능동필터에 무효전력보상의 기능까지 추가시켜 하나의 장치로 구성시키는 문제는 금후 이루어져야 할 좋은 연구과제라고 사료된다.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.48-52
• /
• 2005

The research topic of super-RENS technology is shifting from the signal intensity (CNR; Carrier to Noise Ratio) to the signal uniformity (Jitter or bER). To achieve an uniform signal characteristics, it is important to reduce signal fluctuation in a super-RENS disc. In this study, we investigated the relation between signal fluctuation and low frequency noise (LFN), and analyzed LFN increase in recording and readout processes. It was found that signal fluctuation had a close relationship with the LFN. Also, it was found that the recorded mark shape such a bubble type and high readout power increased the LFN in recording and readout process of a super-RENS disc. So, using non-bubble type recording material and low super-resolution readout material, we markedly improved the LFN in a super-RENS disc.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.564-566
• /
• 2003

전력 계통에서 안정한 전력을 공급하는 것은 매우 중요하다. 전력 계통의 오류는 전압 및 주파수를 감시함으로써 검출 가능하다. 본 논문에서는 디지털 위상 고정 루프를 이용한 전력 계통의 주파수 측정 장치를 제안하고 이를 구현한 결과를 제시하고자 한다. 제안한 주파수 측정 장치는 위상 고정 루프의 기본요소로 구성된다. 위상분별기는 배타적 논리연산을 통해 위상오차를 검출하고 위상의 앞섬 및 뒤짐의 검출이 가능하도록 설계하였으며, 전력 계통의 주파수 동특성을 고려해서 3차의 루프 필터를 설계하였다. DCO는 출력 주파수의 분해능을 고려하여 입력 신호를 정확하게 추정할 수 있도록 설계하였다. 제안한 주파수 측정 장치의 성능을 검증하기 위하여 모의실험을 통해 주파수 변동량의 측정 범위 및 정확도를 검토하였으며, FPGA와 CPU를 포함하는 하드웨어를 구현하였다. FPGA에는 Verilog HDL로 디지털 위상 고정 루프의 위상분별기와 DCO를 구현하였으며 루프필터는 소프트웨어로 구현하였다. 제안한 디지털 위상 고정 루프의 성능 검증을 위해 정밀한 함수 발생기의 출력을 인가한 후 출력 주파수를 측정한 결과 및 전력 계통에 대한 실험 결과를 제시하였다.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.233-238
• /
• 1998

In this paper, the implementation of dual rate ADPCM using G.726 16Kbps and 40Kbps speech codec algorithm is handled. For small signals, the low rate 16Kbps coding algorithm shows almost the same SNR as the high rate 40Kbps coding algorithm , while the high rate 40Kbps coding algorithm shows the higher SNR than the low rate 16Kbps coding algorithm fur large signal. To obtain the good trade-off between the data rate and synthesized speech quality, we applied low rate 16Kbps for the small signal and high rate 40Kbps for the large signal. Various threshold values determining the rate are applied for good trade-off between data rate and speech quality. The simulation result shows the good speech quality at a low rate comparing with 16Kbps & 40Kbps.

• Journal of Korea Multimedia Society
• /
• v.6 no.5
• /
• pp.816-823
• /
• 2003

In this paper, we propose a blind audio watermarking using the tonal characteristic. First, we explain the perceptional effect of tonal on the existed researches and shout the experimental result that tonal characteristic is more stable than other characteristics used in previous watermarking studies against several signal processing. On the base of the result, we propose the blind audio watermarking using the relation among the signals on the frequency domain which compose a tonal masker. To evaluate the sound quality of our watermarked audios, we used the SDG(Subjective Diff-Grades) and got the average SDG 0.27. This result says the watermarking using the perceptional effect of tonal is available from the viewpoint of non-perception. And we detected the watermark hits from the watermarked audios which were changed by several signal processing and the detection ratios with exception of the time shift processing were over 98%. About the time shift processing, we applied the new method that searched the most proper position on the time domain and then detected the watermark bits by the ratio of 90%.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.197-203
• /
• 2008

A shallow high-resolution seismic reflection survey was carried out at the Mineopo tidal flat on the western coast of Korea. The purpose of the survey was to investigate shallow sedimentary structure of the tidal flat associated with the recent sea level change. A total of 795 shots were generated at 1 m interval from a 5-kg hammer source and recorded on 48 channels of 100 Hz geophones along two mutually perpendicular profiles. The water-saturated ground condition resulted in suppressed ground rolls by significantly decreasing rigidity. In addition, seismic velocities over 1500 m/s provided easy segregation of reflected arrivals from lower velocity noise. As a consequence, seismic sections from the study area show significantly higher resolution and signal to noise ratio than conventional land seismic sections. The tidal flat consists of 5 sedimentary sequences above acoustic basement. The seismic sections reveal the continuous structure of the tidal flat formed in association with sea level rise during the Holocene.