• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.133-135
• /
• 2008

최근 들어 전력 계통은 점차 복잡해지고 계통의 규모 역시 빠른 속도로 성장하고 있다. 한국전력거래소는 전력계통의 안정적, 경제적 운영을 담당하고 있는 기관으로 '01년 현재의 에너지관리시스템(EMS)를 도입하여 실시간 전력계통에 대한 정확한 판단을 기반으로 전력계통의 안정성과 경제성 확보에 주력하고 있다. EMS의 대표적인 기능이라 할 수 있는 AGC(Automatic Generation Control)은 실시간으로 변화하는 전력수요를 맞추기 위해 전력 계통에 병입된 AGC 제어 대상 발전기의 출력을 가장 경제적이며 안정적으로 조정하는 것을 담당한다. 이 때 전력수요와 발전기 출력의 차이를 나타내는 것이 주파수인데 현재 주파수와 정규 주파수(60Hz)의 편차를 줄이기 위해 개별 발전기의 특성인 분당 증감발율을 사용하여 개별 발전기에 제어량을 배분하게 된다. 본고에서는 먼저 현재 운영중인 EMS에 구현된 알고리즘을 소개하고 기존 알고리즘의 개선방안인 그룹제어 방식에 대해 소개하고자 한다. 그룹제어 방식은 여러 대의 발전기를 특정 그룹으로 정해 제어신호를 최소화하는 기법으로 과도한 제어신호로 인한 발전기의 피로도를 저감하고 전력계통의 요동을 방지할 수 있을 것으로 기대한다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.195-198
• /
• 2001

본 논문에서는 최근 그 응용이 증가하고 있는 CAN통신 프로토콜을 이용하여 차량내 network개념을 도입하여 차내 각종 전기신호와 센서 입출력을 제어하는 통합 시스템의 개발에 관한 것을 간략히 기술한다. CAN시스템은 최대 1Mbps의 전송 비트율과 에러검출 및 에러영향의 시스템 내로의 한정 등의 기능이 뛰어난 높은 레벨의 통신 안정성을 가지면서 분산 실시간 제어를 효율적으로 지원하는 serial bus communication프로토콜의 하나이다. 본 연구에서 개발된 시스템은 4개의 독립 제어시스템과 관련 소프트웨어로 구성되어 있으며. 각각의 제어시스템간의 정보의 교환은 CAN통신 프로토콜에 안정적으로 이루어지며 자동차의 고급화와 함께 향후 실용화가 기대된다.

• Science of Emotion and Sensibility
• /
• v.26 no.4
• /
• pp.41-50
• /
• 2023

This study aims to develop electromyography (EMG) textile electrodes and assess their performance and signal stability by examining variations in layer count and fabric types. We fabricated the electrodes through layering and pressing techniques, focusing on configurations with different layer counts (Layer-0, Layer-1, and Layer-2). Our findings indicate that layer presence significantly influences muscle activation measurements, with enhanced performance correlated with increased layer numbers. Subsequently, we created electrodes from five distinct fabrics (neoprene, spandex cushion, 100% polyester, nylon spandex, and cotton canvas), each maintaining a Layer-2 structure. In performance tests, nylon spandex fabric, particularly heavier variants, outperformed others, while the spandex cushion electrodes showed superior stability in muscle activation signal acquisition. This research elucidates the connection between electrode performance and factors like layer number and electrode-skin contact area. It suggests a novel approach to electrode design, focusing on layer properties and targeted pressure application on specific sensor areas, rather than uniformly increasing sleeve pressure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.229-236
• /
• 2005

This paper is contribute to Inverse continuous wavelets transform(ICWT) which permits to determine real 'time-scale' plan. The application of ICWT is not yet represented because of the numerical difficulty. If the signal can be reconstructed stably by ICWT, the multi scale filter bank system which composed by analysis and synthesis process can be designed. In this work, we represent the ICWT which leads to nearly perfect reconstruction of signal and the multi-scale filter bank system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.145-150
• /
• 2011

This study was developed the posture balance system of multi-parameter for moving body after and before exercising. Body transition meaned a head moving and upper body moving. This system has catched a signal for physical condition of body data such as a data acquisition system, data signal processing and feedback system. There were checked a parameter that measured vision, vestibular, somatosensory, CNS. This system was evaluated a data through the stability. The posture balance system can be used to support assessment for body moving in exercising situation. It was expected to monitor a physical parameter for health management system.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.143-144
• /
• 2008

본 논문은 오디오 압축시 하모닉의 특성을 적용함으로써 신호의 압축률을 향상시킬 수 있도록 하는 내용을 기술하고 있다. 하모닉 코딩은 오디오 신호가 가지는 특징인 복합음(Complex tone)의 특성을 이용하는 것으로, 주파수 공간에서 정수배의 주파수가 존재하며, 정면파의 특성상 시간적으로 인접 신호들간의 유사성이 매우 높은 특징을 이용하여 압축효율을 향상시키는 방법이다. 하지만 실질적인 오디오 신호의 경우, 악기들의 harmonic stretch, 전달과정에서 발생하는 신호의 왜곡, 외부 잡음등의 특성으로 인하여 수집된 오디오 신호를 분석하는 과정에서 부정확한 하모닉의 판단이 이루어질 가능성이 높으며, 이는 압축과정에서 심각한 음질의 열화를 가져오게 된다. 따라서 본 논문에서는 프레림간의 변화 추이의 판단을 통하여 하모닉의 변화를 예측하고, 예측 오류에 대한 보상값을 전달함으로써 오디오 신호의 안정적인 압축/복원이 가능하도록 하는 신호처리 방법에 대한 내용을 기술하고있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.359-369
• /
• 2022

In slope stability analysis for landslides, mountains have various slopes and geographical features, and hence it is necessary to estimate stability using rigorous analysis methods. In this study, after the analysis of infiltration behavior through unsaturated layers due to rainfall, the stability of landslide was estimated to account for the variation of pore water pressures. In the analysis of slope stability, a three-dimensional slope analysis was compared with an infinite slope analysis in a case study of terrain in which an actual landslide occurred. In the three-dimensional slope stability analysis, it was found that the location of the failure and the failure area were predicted accurately based on the detailed geological information despite the variation of geographical features.

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.121-131
• /
• 2017

We studied the time-dependent behaviors of rock and concrete materials by conducting the static and dynamic long-term strength tests. In particular, acoustic emission(AE) signals generated while the tests were analyzed and used for the long-term stability evaluation. In the static subcritical crack growth test, the long-term behavior and AE characteristics of Mode I and Mode II were investigated. In the dynamic long-term strength test, the fatigue limit and characteristics of generation of AE were analyzed through cyclic four points bending test. The graph of the cumulative AE hits versus time showed a shape similar to that of the creep curve with the first, second and third stages. The possibility for evaluating the static and dynamic long-term stability of rock and concrete is presented from the log - log relationship between the slope of the secondary stage of cumulative AE hits curve and the delayed failure time.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.84-89
• /
• 2002

In this paper, we present the design method of noise reduction circuit in telephonic system. The circuit consists of compressor, expander and a filter. The basic idea of a proposed method compresses the audible signal in order to mask the channel noise during transmission and then expand at the reverse rate the transmitted signal to naturally recover the original signal. Of course, there should be no distortion or other degradation of the audio itself in passing through companding(compress/expand) cycle. In the compressing process, the gain of compressor is automatically controlled by the envelope level of input signal in order to increase the effective dynamic range of input signal and to improve the signal to noise ratio. The compressed rate is the root time of a audible signal. The compressed signal should be expanded at the square time of the signal to recover a original signal. Simulation shows the proposed method improves the performance of the noise reduction of a channel noise as well as stability. 

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.2
• /
• pp.83-90
• /
• 2011

Purpose: This study statistically analyzed the difference of the stability of maintaining a respiratory period shown according to position and use of a device to search the tendency and usefulness of a device. Materials and Methods: The study obtained respiratory signals which maintained a respiratory period for 20 minutes each supine and prone position for 11 subjects. The study obtained respiratory signals in a state of using a belly board for 7 patients in a bad condition of a respiratory period in a prone position to analyze a change in respiration and the stability before and after the use of a device. Results: The supine part showed 54.5%, better than the prone part of 36.4% in a case that the stability for maintaining a respiratory period was in a good condition as a fixed respiratory period was well maintained according to the position. 6 patients (85%) showed a maintenance pattern of a respiratory period significantly different before the use and 4 patients showed a significantly good change in the stability for maintaining a respiratory period as a result that belly boards were used for 7 patients that the maintenance of a respiratory period was not in a good condition on a prone position. Conclusion: It seemed that this study could contribute to the maintenance of respiratory period and of respiratory stability as the optimal position for maintenance of respiration and the use of a device such as a belly board were decided through statistic analysis of respiratory signals and its application even if patient position and use of device were decided by the beam arrangement a treatment part of a patient, location of a target, and an expected plan.