• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.289-291
• /
• 2005

본 연구는 페러데이 효과(Faraday Effect)를 이용한 GIS용 광 CT의 개발을 위하여 출력신호의 정밀성과 안정성 향상을 위한 신호분석 시스템에 대해 검토하였다. 기존 광 CT의 Verdet 상수 의존도와 온도에 따른 특성 및 노이즈에 대한 정밀성을 개선하기 위해 신호처리 시스템 이용하여 신호를 균일화시키고 온도 보상 프로그래밍을 이용하여 온도 특성에 따른 오차를 저감시키고자 한다. 또한 신호 계측부와 신호 처리부를 분리하여 신호 처리부를 프로그래밍 시켜 실시간으로 광 CT 특성을 모니터링 할 수 있는 시스템을 연구 검토하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.205-210
• /
• 2014

This is concerned with the technology to display the design on Porcelain and adjust malfunction for moving effect and light intensity by curator. More precisely, the technology makes it possible that the porcelain is connected to Light module which is the device for controlling light emission and rotating rolling plate, etc that are connected to LED light module, optical fiber and controller that is for scenario from the given storytelling. In addition, with a WiFi portable device (Smart-phone, other mobile device). equipped with a scenario programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and menu color and alarm is alerted when the displaying design is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiFi network to the device and PC managed by the curator specialized in managing the design on the Porcelain, thus the technology could help the curator who have less knowledge about moving pattern on the Porcelain. There is always a possibility of malfunction due to various condition that are caused by wring-harness when modules are wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from LED control module, Light emission sensor and a personal WiFi device. Also, we performed connection between optical Fiber and LED and interlock for the system defined by the definition for information and storytelling scenario.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.3
• /
• pp.20-33
• /
• 2021

Modern society is steadily implementing policies to encourage public transportation to cope with the growing traffic demand on limited roads. The expectation is rising for transit signal priority to ensure the speed of buses as the installation of the bus rapid transit(BRT) expands nationwide to secure the competitiveness of buses. On the other hand, the form of BRT stops without considering some aspects of bus operation may increase the number of stops on the bus, thereby reducing the effectiveness of bus signal priority applications. This study suggests the type of bus stop to increase the operation efficiency of buses by analyzing the bus signal priority effect according to the BRT station type using Hannuri-daero, Sejong. The bus signal priority is used to maximize the two-way bandwidth of passenger cars and buses. As a result of the application, the effectiveness of the bus signal priority at the stop causing the double stop of the bus was reduced drastically, and the efficiency of the bus signal priority was increased significantly after improvement. These results are expected to be used as basic data in the form of proper bus stops considering the aspects of traffic operation when designing BRT stops in new towns in the future.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.53-62
• /
• 2009

The purposes of the study is to comparatively analyze the applicability of roundabout to the diamond interchange. In pursuing the above, this study give the particular attentions to comparing the performances of roundabout with those of TWSC and signalized intersection based on the aaSIDRA software. The main study results are as follows. First, when the entering traffic volumes(ETV) are more than 480pcph, the single-lane roundabout is analyzed to be more effective than 4-leged unsignalized intersection and when ETV are $480{\sim}1,880pcph$, double-lane roundabout is analyzed to be more effective than 4-legged intersection Second, when ETV are more than 980pcph at the single-lane intersection and $1,600{\sim}3,680pcph$ at the double-lane intersection, roundabout is analyzed to be more effective than other 3-legged intersections. In summary, when the roundabout installs at the interchange, it is important to consider the range of ETV.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.395-402
• /
• 1995

The intravoxel spin phases in magnetic resonance imaging (MRI) usually vary due to susceptibility differences of materials to be imaged. The phase variation in the voxel results in a reduction of the signal intensity. This signal intensity reduction is known as the susceptibility effect in MRI and has been studied extensively. In this paper, a new spectral decomposition technique Is proposed and the signal change due to the susceptibility effect can be analyzed. A pulse sequence for the spectral decomposition of the susceptibility was developed and applied to susceptibility imaging of venous blood possessing paramagnetic properties. The computer simulations and their corresponding experimental results obtained using both a phantom and human volunteers are reported. Key words : susceptibility effect in MRI : spectral decomposition of susceptibility effect.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.337-340
• /
• 2011

In location finding system using spaced multi-sensor, Depending on the signal source's location and the location of the sensors Position estimation accuracy is determined. This phenomenon is called GDOP effect. and to minimize these effects, research is needed on how. In this paper, I will describe how to minimize GDOP effect, estimating GDOP using angle of arrivals of multi sensors, and removing sensor error factor.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.189-192
• /
• 1999

수중소음체의 음원 특징을 해석하기 위해서는 배경잡음과 해면$\cdot$해저반사파의 영향이 적은 심해에서 측정하여 분석하여야 한다. 그러나 측정의 어려움으로 인공 수조에서 측정하여 수면과 수조벽에 의해 발생되는 반사파들을 제거하여 신호 고유의 특징을 해석한다 이러한 반사파들의 부가효과를 보상하여 수중소음체의 신호특징을 해석하기 위하여 정합필터배열처리(Matched Filter Array Process : MFAP)기법을 적용하고자 할 때 각 센서에 적용되는 정합필터는 처리시간의 문제로 인해 필터길이를 제한하여 구성되게 된다 정합필터는 수조의 임펄스응답함수의 시역전함수로 정의되는데 필터길이에 따라 수신신호 특징 개선 정도가 좌우된다 본 연구에서는 인공수조에서 부가되는 반사파들의 효과를 보상하여 수신신호 특징 개선을 위해 정합필터배열처리기법을 적용할 때 각 센서의 정합필터의 시간길이가 특징 개선에 미치는 영향을 신호대잡음비(SNR)로 정의하여 분석하였고 수조의 특성에 따른 최적의 정합필터 시간길이를 제안하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.110.1-110.1
• /
• 2016

국내외 최첨단 반도체 및 평판 디스플레이 공정에서 필요한 개별 건식 진공펌프들의 자기진단을 통한 예지보수의 실시간 구현 장치 개발과제의 2차년 전반기 수행된 연구결과의 일부를 본 논문에서 소개한다. 본 연구에서 최종 목표로 설정하고 있는 "smart" 진공펌프란 운전상태에 관련된 변수들의 측정치를 기반으로 한 자기진단 (self-diagnostics) 기능을 내장한 차세대 공정용 진공펌프를 의미한다. 1차년에 선정된 상태진단용 진공펌프의 상태변수(state variable)들의 효과적인 수집을 구현하기 위한 연구가 진행되었다. 기존의 반도체 공정용 진공펌프들에서 측정하고 있는 상태변수로는 온도, 유량, 배기관 압력, 모터 소비전류 등과 같은 정적인 변수들뿐 아니라, 회전기계류의 상태진단에 필수적인 진동신호를 추가한 상태 변수 수집 장치를 개발하였다. 본 연구팀은 진공펌프의 회전진동을 유발하는 대표적인 부품은 회전체, 베어링, 그리고 치차로 이들 3 종의 회전진동성분들을 효과적으로 측정할 수 있는 신호처리 기법을 개발하였다. 금번 연구에서 채택한 진동신호 처리기법은 초고속 FFT 변환 기반의 주파수 대역 별 진동 레벨 환산과 더불어 다단계로 구성된 디지털 필터 (multi-staged decimation filter) 기법을 개발 적용하였다. 이러한 신호처리 기법을 통하여 측정된 진동 신호로부터 회전체, 베어링, 그리고 치차의 회전 진동성분을 효과적으로 측정하는 방법을 금번 학술대회에서 소개한다. 그리고, 진공펌프 상태진단에 필요한 상태변수의 실시간 backup 방법, 그리고 공정관리 server와 통신기능, 그리고 펌프 현장 관리자용 PC와 통신 기법 등 상태변수 측정 모듈의 확장성에 대한 기술적 내용을 소개한다.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2958-2968
• /
• 2000

To effectively supervise WDM systems requires that the alarm signals for each optical transport network layer is considered. The related recommendations and studies for alarm signals are defining fundamental functions without specifying the structure and configuration of the supervisory channel. In this paper, we propose the detailed alarm signals and propagation flows for each optical transport network layer. We also describe the structure of overhead and the configuration of supervisory channel. Our proposals are based on the ITU T requirements of optical transport network and the supervisory schemes of terminal & add-drop systems. We show that our proposed schemes effectively performs supervisory functions for various fault conditions which will occur in terminal & add-drop typed WDM systems.

• Korean Journal of Optics and Photonics
• /
• v.29 no.6
• /
• pp.247-252
• /
• 2018

We report amplification of a small signal in a diode-pumped Cs vapor cell with 500 torr of ethane buffer gas, in the low-pump-power regime of 200 mW or less. For efficient amplifier operation, the pump and signal beams were coupled to a single-mode optical fiber, and completely overlapped in the Cs vapor cell. We investigated the amplification of the small signal according to cell temperature, signal power, and pump power. An amplification factor of 56 was achieved under the conditions of cell temperature of $115^{\circ}C$, signal power of 0.1 mW, and pump power of 200 mW.