• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10A
• /
• pp.823-829
• /
• 2011

Recently, wireless body area network (WBAN) has received much attention as an application for the ubiquitous healthcare system. In WBAN, each sensor nodes and a personal base station such as PDA have an energy constraint and computation overhead should be minimized due to node's limited computing power and memory constraint. The reliable data transmission also must be guaranteed because it handles vital signals. In this paper, we propose a systematic network coding scheme for WBAN to reduce the network coding overhead as well as total energy consumption for completion the transmission. We model the proposed scheme using Markov chain. To minimize the total energy consumption for completing the data transmission, we made the problem as a minimization problem and find an optimal solution. Our simulation result shows that large amount of energy reduction is achieved by proposed systematic network coding. Also, the proposed scheme reduces the computational overhead of network coding imposed on each node by simplify the decoding process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2613-2620
• /
• 2014

In this paper, we consider a full duplexing (FD) wireless cellular network where a central base station (BS) works in the FD mode while the downlink (DL) and uplink (UL) users work in the time division duplexing (TDD) mode. Since this FD system induces the inter-user interference from UL user to DL user, the main challenge for maximizing the system performances is user scheduling that makes a pair of DL user and UL user to use the same radio resource simultaneously. We formulate an optimization problem for user pairing to maximize the cell capacity and propose a suboptimal user scheduling algorithm with low complexity. This scheduling algorithm is designed in a way where the DL user with a better signal quality has a higher priority to choose its UL user that causes less interference. Simulation results show that the FD system using the proposed user scheduling algorithm achieves the optimal performance and significantly outperforms the conventional TDD system in terms of the cell capacity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4149-4155
• /
• 2013

High speed machining for higher cutting speed and feedrate lead to a increase of surface quality and material removal rate. This paper presents a study of the influence of cutting conditions on the vibration characteristics obtained by machining with face milling cutter for high speed machining. In this paper, Taguchi experimental design method which is based on orthogonal array table was applied to study vibration characteristics with high speed face milling cutter. The experimental conditions used orthogonal array of $L_{27}(3^{13})$. In this work, design and analysis of experiments is conducted to study the effects of these parameters on the vibration by using the S/N ratio, analysis of variance. Four cutting parameters namely, feed rate, champer length, cutting speed, and depth of cut were optimized with consideration of vibration characteristics.

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.355-362
• /
• 2010

This study determines a range of CT parameter values in Brain CT which are minimizing patient absorption dose without compromising the image quality and optimal exposure condition. We measured dose and image noise using conventional CT parameters in Brain CT. In additon, we evaluated dose, SNR and PSNR of head phantom images while changing kVp and rotation time. In this study, effectiveness of dose that was achieved from dose reproducible experiments in conventional head CT condition is determined by changing kVp and rotation time. Dose and PSNR is related to low dose-high resolution condition. In conclusion, we suggest that using proposed conditions is effective for imaging to compare with conditions proposed by the manufacturer.

• Journal of Korean Society of Transportation
• /
• v.23 no.1
• /
• pp.83-92
• /
• 2005

This study if the first trial toward realizing a new methodology for vehicle re-identification based on heterogeneous sensor systems. A major interest of the author is how to effectively utilize information obtained from different sensors to derive accurate and reliable section travel times. The 'blade' sensor that is a newly developed sensor for capturing vehicle wheel information and the existing square loop sensor are employed to extract the inputs of the proposed vehicle re-identification algorithm. The fundamental idea of the algorithm developed in this study, which is so called 'anonumous vehicle re-identification,' it to match vehicle features obtained from both sensors. The results of the algorithm evaluation reveal that the proposed methodology could be successfully implemented in the field. The proposed methodology would be an invaluable tool for operating agencies in support of traffic monitoring systems and traveler information systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.82.2-82.2
• /
• 2013

반도체 및 디스플레이 소자를 생산 하기 위하여 다양하고 많은 공정 기술이 사용 되며 그 중에서 플라즈마를 이용하는 제조공정이 차지 하는 부분은 상당한 부분을 차지 하고 있습니다. 전체 반도체 공정 중 48%가 진공공정이며, 진공공정 중 68% 이상이 플라즈마를 이용하고 있으며, 식각과 증착 장비 뿐만 아니라 세정과 이온증착 에 이르기 까지 다양하며 앞으로도 더욱 범위가 늘어 날 것으로 보입니다. 이러한 플라즈마를 이용한 제조 공정들은 제품의 생산성을 향상 하기 위하여 오염제어 기술을 비롯한 공정관리기술 그리고 고기능 센서기술을 이용한 공정 모니터링 및 제어 기술에 이르기 까지 다양한 기술들을 필요로 합니다. 플라즈마를 이용한 제조 장비는 RF파워모듈, 진공제어모듈, 공정가스제어모듈, 웨이퍼 및 글래스의 반송장치, 그리고 온도제어 모듈과 같이 다양한 장치의 집합체라 할 수 있습니다. 플라즈마의 생성과 이를 제어 하기 위한 기술은 제조장비의 국산화를 위한 부단한 노력의 결실로 많은 부분 기술이 축적되어 왔고 성과를 거두고 있습니다. 그러나 고기능 모니터링 센서 기술 개발은 그 동안 활발 하게 이루어져 오고 있지 않았으며 대부분 외산 기술에 의존해 왔습니다. 세계 반도체 시장은 현재 300 mm 웨이퍼 가공에서, 추후 450 mm 시장으로 패러다임이 변화될 예정이며, 미세화 공정이 더욱 진행 됨에 따라 반도체 제조사들의 관심사가 "성능 중심의 반도체 제조기술"로부터 "오류 최소를 통한 생산성 향상"에 더욱 주목 하고 있습니다. 공정미세화 및 웨이퍼 대구경화로 인해 실시간 복합 센서를 이용한 데이터 처리 알고리즘 및 자동화 소프트웨어의 기능이 탑재된 장비를 요구하고 있습니다. 주식회사 레인보우 코퍼레이션은 플라즈마 Chemistry상태를 정성 분석 가능한 OES (Optical Emission Spectroscopy)를 이용한 EPD System을 상용화 하여 고객사에 공급 중이며, 플라즈마의 광 신호를 실시간으로 고속 계측함과 동시에 최적화된 알고리즘을 이용하여 플라즈마의 이상 상태를 감지하며 이를 통하여 제조 공정 및 장비의 개선을 가능하게 하여 고객 제품의 생산성을 향상 하도록 하는 기술을 개발 하고 있습니다. 본 심포지엄에서는 주식회사 레인보우 코퍼레이션이 개발 중인 "실시간 고속 플라즈마 광 모니터링 기술" 의 개념을 소개하고, 제품의 응용 범위와 응용 방법에 대하여 설명을 하고자 합니다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.927-934
• /
• 2019

Recently, mobile devices have evolved into small computers with various functions according to user requirements. Careful attention must be paid to the design of the power supply network for the stable operation of the application processor (AP), the wireless communication modem, the high performance camera, and the various interfaces of the mobile device to implement various functions of the mobile device. In this paper, we analyzed and verified the method of optimizing the design parameters such as the position, capacity, and number of decoupling capacitors to meet the target impedance required by the driver IC chip to ensure the stability of the power supply network of mobile devices that should be designed as wiring type due to mounting density limitation. The proposed wired power supply network design method can be applied to various applications including high-speed signal transmission line in addition to mobile applications.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.687-694
• /
• 2008

Given the daily tactical schedule, the purpose of the traffic management system is to develop operating plan that will achieve the stated schedule as best as possible. The operating plan has to be modified during the day because of occurring disturbance(e.g. delay, infrastructure breakdown, etc.) Conflict detection and resolution(CDRS) are aimed for adjusting the distorted schedule to tactical schedule. Our research separate CDRS into two hierarchy modules, line conflict control module and station conflict control module. We define the role of each modules and design the cooperative architecture. We suggest the conflict detection and resolution approach based on mathematical model. These results can be implemented as prototype modules.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.763-770
• /
• 2021

In this paper, in order to exclude the influence of BAN(Body Area Network) signals operating in the ISM band, the design and optimization process of an on-body microstrip patch antenna operating at 4.567 GHz is presented. The antenna for the monitoring of the lower legs with cancellous osteoporosis is designed to be lightweight and compact with improved return loss and bandwidth. The structure around the applied lower leg consisted of a five-layer dielectric plane. Taking into account losses, the complex dielectric constant of each layer is calculated using multi Cole-Cole model parameters, whereas a unipolar model is used for normal or osteoporotic cancellous bones. The return loss of the coaxial feed antenna on the phantom is -67.26 dB at 4.567 GHz, and in the case of osteoporosis, at the same frequency the return loss difference is 35.88 dB, and the resonance frequency difference is about 7 MHz.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.6
• /
• pp.1127-1136
• /
• 2021

In the field of power analysis attacks, electrical noise and misalignment of the power consumption trace are the major factors that determine the success of the attack. Therefore, several studies have been conducted to overcome this problem, and one of them is a signal processing method based on wavelet transform. Up to now, discrete wavelet transform, which can compress the trace, has been mostly used for power side-channel power analysis because continuous wavelet transform techniques increase data size and analysis time, and there is no efficient scale selection method. In this paper, we propose an efficient scale selection method optimized for power analysis attacks. Furthermore, we show that the analysis performance can be greatly improved when using the proposed method. As a result of the CPA(Correlation Power Analysis) and DDLA(Differential Deep Learning Analysis) experiments, which are non-profiling attacks, we confirmed that the proposed method is effective for noise reduction and trace alignment.