• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1150-1158
• /
• 2011

More than 100 Mbps rate is needed in the UBcN for a subscriber to receive broadband traffics with multi-channel like UDTV or 3DTV. Although the optical fiber is recently deployed for the FTTH, the UTP is the most widely used medium and will be used in UBcN age. Network providers may consider the 1000BASE-T or the vectorized VDSL if they adopts the UTP in the place where does not have optical fibers. But UTP should be expanded because 1000BASE-T and vectorized UTP needs 4 and 3 pairs cable, respectively while residential region has not exceeding 2 pair UTP cable. To solve the problem, we propose a 500BASE-T technology using 2 pairs UTP in this paper. The technology introduces a rate adaptation sublayer and a SERDES sublayer above and under the PCS, respectively. The rate adaptation sublayer is compatible for the GMII. Also, if we modify the SERDES sublayer, the technology can easily obtain 250BASE-T with 2 pairs UTP. We implement such functions with FPGA and analog board and verify the function of rate adaptation and symbol vector synchronization, and effective transmission rate by experiments. In particular, we show that link efficiency is increased by enable control in the rate adaptation sublayer.

• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.130-144
• /
• 2004

Recently, the air pollution in A and B industrial area has become one of the most important issues, then 60 VOCs in the area were measured using a highly sensitive method. The VOCs were adsorbed onto Carbotrap using air sampler and subsequently desorbed by a thermal desorber system into gas chromatograph-mass spectrometry (TDS-GC-MS). The peaks of all compounds had good chromatographic properties and offered very sensitive response for the EI-MS (SIM). Method detection limits (MDL) ranged from 0.01 to 0.1 ppt(v/v), and linearities of calibration curves were over 0.995. We analyzed total 90 atmosphere air samples of A and B industrial complex using the method. Benzene, toluene, ethylbenzene, xylene, n-hexane, fluorotrichloromethane, carbon tetrachloride, 1,2-dichloroethane, 1,1,1-trichloroethane, trichloroethylene, tetrachloroethylene, styrene, 1,3,5-trimethylbenzene, 1,2,4-trimethylbenzene, sec-butylbenzene and naphthalen were identified as the major compounds in the air, and their average concentrations were 0.81, 5.02 1.30, 3.0, 0.81, 37.9, 0.07, 0.15, 0.15, 0.79, 0.06, 0.33, 0.03, 0.12, 0.23, and 0.35 ppb(v/v), respectively. The concentrations of VOCs were low in summer and high in fall or winter. When the concentrations detected in air compare with WHO's norm, no case exceed it.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.113-136
• /
• 2017

New product preannouncement through global supply chain management and international strategic alliances is a critical issue for firm's survive and gaining the competitive advantage in the global smart-phone market. To identify the impact of exploration alliance and exploitation alliance on the short-term's Firm Performance, respectively, This study implemented the event study and the cross sectional regression analysis, focusing on the case of Galaxy Note series. Research results identified that new technologies by exploration alliance and the existing technologies through exploitation alliance have a positive effect on the short-term's performance of vendors related. Furthermore, information for the new products showed higher the excess earning rate than information related to the existing technologies. This implies the firms that provides new technologies have a stronger innovative ability than the companies serving the existing technologies, recognizing as a positive signal in the market. Finally, this study implicates that new technologies by exploration alliance enhances innovative abilities from new product preannouncement, and is a critical variable that can determines whether to survive in the market.

• Journal of Intelligence and Information Systems
• /
• v.16 no.3
• /
• pp.77-97
• /
• 2010

Market timing is an investment strategy which is used for obtaining excessive return from financial market. In general, detection of market timing means determining when to buy and sell to get excess return from trading. In many market timing systems, trading rules have been used as an engine to generate signals for trade. On the other hand, some researchers proposed the rough set analysis as a proper tool for market timing because it does not generate a signal for trade when the pattern of the market is uncertain by using the control function. The data for the rough set analysis should be discretized of numeric value because the rough set only accepts categorical data for analysis. Discretization searches for proper "cuts" for numeric data that determine intervals. All values that lie within each interval are transformed into same value. In general, there are four methods for data discretization in rough set analysis including equal frequency scaling, expert's knowledge-based discretization, minimum entropy scaling, and na$\ddot{i}$ve and Boolean reasoning-based discretization. Equal frequency scaling fixes a number of intervals and examines the histogram of each variable, then determines cuts so that approximately the same number of samples fall into each of the intervals. Expert's knowledge-based discretization determines cuts according to knowledge of domain experts through literature review or interview with experts. Minimum entropy scaling implements the algorithm based on recursively partitioning the value set of each variable so that a local measure of entropy is optimized. Na$\ddot{i}$ve and Booleanreasoning-based discretization searches categorical values by using Na$\ddot{i}$ve scaling the data, then finds the optimized dicretization thresholds through Boolean reasoning. Although the rough set analysis is promising for market timing, there is little research on the impact of the various data discretization methods on performance from trading using the rough set analysis. In this study, we compare stock market timing models using rough set analysis with various data discretization methods. The research data used in this study are the KOSPI 200 from May 1996 to October 1998. KOSPI 200 is the underlying index of the KOSPI 200 futures which is the first derivative instrument in the Korean stock market. The KOSPI 200 is a market value weighted index which consists of 200 stocks selected by criteria on liquidity and their status in corresponding industry including manufacturing, construction, communication, electricity and gas, distribution and services, and financing. The total number of samples is 660 trading days. In addition, this study uses popular technical indicators as independent variables. The experimental results show that the most profitable method for the training sample is the na$\ddot{i}$ve and Boolean reasoning but the expert's knowledge-based discretization is the most profitable method for the validation sample. In addition, the expert's knowledge-based discretization produced robust performance for both of training and validation sample. We also compared rough set analysis and decision tree. This study experimented C4.5 for the comparison purpose. The results show that rough set analysis with expert's knowledge-based discretization produced more profitable rules than C4.5.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.493-502
• /
• 2006

The slaughter weight (wt) is a most important economic factor in swine roduction. The present study was undertaken to determine if it is feasible to increase the slaughter wt of finishing pigs to 130kg without significantly affecting the growth efficiency and carcass quality. One hundred and sixty gilts and 160 barrows born from lean-type Yorkshire×Landrace (YL)-dam and Duroc (D)-sire lines, which are most widely used for terminal breeding for pork production in Gyeongsangnam-do, were randomly allocated into 16 pens under a 2 (sex)×2 (slaughter wt; 110 vs. 130kg) factorial arrangement of treatments. The animals were fed ad libitum a diet containing 3,200kcal DE/kg and 15.5% crude protein. After slaughter at the predetermined wt, yields of trimmed primal cuts and physicochemical characteristics of the longissimus dorsi muscle (LD) were measured or analyzed. Average daily gain was greater (P<0.01) in barrows than in gilts (0.86 vs. 0.79kg), but it was not different between the 110- and 130-kg slaughter wt groups (P>0.05). Backfat thickness was greater in the 130- vs. 110-kg group in both sexes (gilts: 21.6 vs. 17.6 mm, barrows: 25.1 vs. 20.8 mm). The yield percentage of belly was greater in barrows than in gilts (21.2 vs. 20.5%) and also in the 130-kg vs. 110-kg group (21.4 vs. 20.2%). Major physicochemical characteristics of LD including the color, percentage of 48-h drip loss, 24-h pH and percentages of crude protein and fat were not influenced by slaughter wt. Marginal profit of the 130-kg vs. 110-kg market pig was approximately 󰠏20,000 won/head, which resulted primarily from the heavy carcass weight of the former exceeding the upper limit of the A- or B-grade. However, if it had not been for the carcass weight limit of the current grading system, a 130-kg market pig would have had a potential marginal profit greater than 20,000 won. Results suggest that slaughter wt of lean-line finishing pigs can be increased to 130kg without significantly compromising the growth efficiency and carcass quality and accordingly, the upper weight limit of the ‘good-grade’ carcass needs to be increased or abolished to accommodate the larger market pigs.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.187-195
• /
• 2010

To assess health risk for the intake among residents after the Hebei Spirit oil spill, 16 Polycyclic Aromatic Hydrocarbons (PAHs) in seafood samples from oil contaminated bay were determined by Gas Chromatography-Mass Spectrometry (GC-MSD) and samples were personally collected and purchased by residents. Samples were hydrolyzed with KOH and extracted with methylene chloride. The extracted solution were cleaned up using silica/florisil column and 16 PAHs were eluted by methylene chloride : n-hexane (1:9) mixture and determined by GC-MSD in Selected Ion Monitoring (SIM) mode. The mean recoveries for 16 PAHs ranged from 79% to 85%. The 16 PAHs levels in 126 samples ranged from 0.17 to $6.04\;{\mu}g$/kg and the TEQBaP (Toxic EQuivalents) levels in 126 samples were calculated using benzo(a)pyrene toxic equivalency factor for individual 16 PAHs and ranged from 0 to $0.91\;{\mu}gTEQ$/kg. The average Benzo(a)pyrene dietary exposure of residents was $5.5{\times}10^{-8}\;mg/kg$ bw/day and the average PAHs chronic dietary exposure was $1.3{\times}10^{-5}\;mg$ TEQ/kg bw/day. The margin of exposure (MOE) and the excess cancer risk and were $1.8{\times}10^6$ and $9.8{\times}10^{-8}$, respectively. Therefore, the assessment result was considered as low concern for health risk.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.399-407
• /
• 2009

Laser induced breakdown spectroscopy(LIBS) is an simple analysis method for directly quantifying many kinds of soil micro-elements on site using a small size of laser without pre-treatment at any property of materials(solid, liquid and gas). The purpose of this study were to find an optimum condition of the LIBS measurement including wavelengths for quantifying soil elements, to relate spectral properties to the concentration of soil elements using LIBS as a simultaneous un-breakdown quantitative analysis technology, which can be applied for the safety assessment of agricultural products and precision agriculture, and to compare the results with a standardized chemical analysis method. Soil samples classified as fine-silty, mixed, thermic Typic Hapludalf(Memphis series) from grassland and uplands in Tennessee, USA were collected, crushed, and prepared for further analysis or LIBS measurement. The samples were measured using LIBS ranged from 200 to 600 nm(0.03 nm interval) with a Nd:YAG laser at 532 nm, with a beam energy of 25 mJ per pulse, a pulse width of 5 ns, and a repetition rate of 10 Hz. The optimum wavelength(${\lambda}nm$) of LIBS for estimating soil and plant elements were 308.2 nm for Al, 428.3 nm for Ca, 247.8 nm for T-C, 438.3 nm for Fe, 766.5 nm for K, 85.2 nm for Mg, 330.2 nm for Na, 213.6 nm for P, 180.7 nm for S, 288.2 nm for Si, and 351.9 nm for Ti, respectively. Coefficients of determination($r^2$) of calibration curve using standard reference soil samples for each element from LIBS measurement were ranged from 0.863 to 0.977. In comparison with ICP-AES(Inductively coupled plasma atomic emission spectroscopy) measurement, measurement error in terms of relative standard error were calculated. Silicon dioxide(SiO2) concentration estimated from two methods showed good agreement with -3.5% of relative standard error. The relative standard errors for the other elements were high. It implies that the prediction accuracy is low which might be caused by matrix effect such as particle size and constituent of soils. It is necessary to enhance the measurement and prediction accuracy of LIBS by improving pretreatment process, standard reference soil samples, and measurement method for a reliable quantification method.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.459-470
• /
• 2007

Domestically, finishing pigs are marketed at 110 kg on an average. However, it is thought to be feasible to increase the market weight to 120kg or greater without decreasing the carcass quality, because most domestic pigs for pork production have descended from lean-type lineages. The present study was undertaken to investigate the growth efficiency and profitability of ‘high’-market wt pigs and the physicochemical characteristics and consumers' acceptability of the high-wt carcass. A total of 96 (Yorkshire × Landrace) × Duroc-crossbred gilts and barrows were fed a finisher diet ad laibtum in 16 pens beginning from 90-kg BW, after which the animals were slaughtered at 110kg (control) or ‘high’ market wt (135 and 125kg in gilts & barrows, respectively) and their carcasses were analyzed. Average daily gain and gain:feed did not differ between the two sex or market wt groups, whereas average daily feed intake was greater in the barrow and high market wt groups than in the gilt and 110-kg market wt groups, respectively(P<0.01). Backfat thickness of the high-market wt gilts and barrows corrected for 135 and 125-kg live wt, which were 23.7 and 22.5 mm, respectively, were greater (P<0.01) than their corresponding 110-kg counterparts(19.7 & 21.1 mm). Percentages of the trimmed primal cuts per total trimmed lean (w/w), except for that of loin, differed statistically (P<0.05) between two sex or market wt groups, but their numerical differences were rather small. Crude protein content of the loin was greater in the high vs. 110-kg market group (P<0.01), but crude fat and moisture contents and other physicochemical characteristics including the color of this primal cut were not different between the two sexes or market weights. Aroma, marbling and overall acceptability scores were greater in the high vs. 110-kg market wt group in sensory evaluation for fresh loin (P<0.01); however, overall acceptabilities for cooked loin, belly and ham were not different between the two market wt groups. Marginal profits of the 135- and 125-kg high-market wt gilt and barrow relative to their corresponding 110-kg ones were approximately -35,000 and 3,500 wons per head under the current carcass grading standard and price. However, if it had not been for the upper wt limits for the A- and B-grade carcasses, marginal profits of the high market wt gilt and barrow would have amounted to 22,000 and 11,000 wons per head, respectively. In summary, 120～125-kg market pigs are likely to meet the consumers' preference better than the 110-kg ones and also bring a profit equal to or slightly greater than that of the latter even under the current carcass grading standard. Moreover, if only the upper wt limits of the A- & B-grade carcasses were removed or increased to accommodate the high-wt carcass, the optimum market weights for the gilt and barrow would fall upon their target weights of the present study, i.e. 135 and 125 kg, respectively.