• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.157-163
• /
• 2008

This paper presents a novel fiber optic tiltmeter system for the health monitoring of large-size structures. The system is composed of a sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy ratting, and low cost. In this paper, a prototype of the fiber optic tiltmeter system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. From an experimental test, the fiber optic tiltmeter is proven to be a prospective sensor for the monitoring of the tilting angle of civil structure with a good linearity. Finally, the test also successfully demonstrates the performance and the potential of the novel fiber optic tiltmeter system to monitor the health of civil infrastructures.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.109-119
• /
• 2020

The FPGAs are semiconductors that can be redesigned after initial fabrication. It is used in various embedded systems such as signal processing, automotive industry, defense and military systems. However, as the complexity of hardware design increases and the design and manufacturing process globalizes, there is a growing concern about hardware trojan inserted into hardware. Many detection methods have been proposed to mitigate this threat. However, existing methods are mostly targeted at IC chips, therefore it is difficult to apply to FPGAs that have different components from IC chips, and there are few detection studies targeting FPGA chips. In this paper, we propose a method to detect hardware trojan by learning the static features of hardware trojan in LUT-level netlist of FPGA using machine learning.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.76-84
• /
• 1997

Loose parts monitoring system(LPMS), which is used to detect metallic loose parts in the nuclear power plant, plays an important role in safe and reliable operation of the plant. To prevent from the damage due to the loose parts, most domestic nuclear power plants are using, or planning to use LPMS. However, these LPMS's, which are all invented from overseas and thereby depend on the oversea technologies, are very expensive, and are known to be inefficient to diagnose loose parts due to the lack of fundamental know-how of LPMS. Therefore, the main purpose of this paper is to propose and to realize a new loose parts localization algorithm which is simple and efficient enough even for the inexperienced operators to diagnose loose parts accurately and promptly. Considering practical nuclear power plant circumstances, some simulations for estimating the loose parts location have been done. The results show that the proposed method, called a modified circle intersection method, performs high resolved loose parts localization with 3.4% of error.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.27-32
• /
• 2018

In this paper, W-band transceiver module for compact radar has been designed and fabricated. Utilizing proposed microstrip-to-waveguide transition, the error between design and implementation is reduced. The proposed transition provides less than 1 dB insertion loss per transition and reliability for fabrication. In order to apply compact radar with dual-polarized monopulse directly, W-band transmitter with 28 dBm output power is designed and developed. Also, 6 channels of receiver module with low noise figure 13.5 dB and maximum 17 dBm input P1dB is developed. Proposed W-band transceiver module is expected compact radar application for dual-polarized monopulse signal processing system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.13-20
• /
• 1990

This paper describes an interframe image coding using motion compensated and classified vector quantizer (MC-CVQ). It is essential to carefully encode blocks with significant pels in motion compensated vector quantizers (MCVQ). In this respect, we propose a new CVQ algorithm which is appropriate to the coding of interframe prediction error after motion compensation. In order to encode an image efficiently at a low bit rate, we partition each block, which is the processing element in MC, into equally sized 4 vectors, and classify vectors into 15 classes according to the position of significant pels. Vectors in each class are then encoded by the vector quantizer with the codebook independently designed for the class. The computer simulation shows that the signal-to-noise ratio and the average bit rate of MC-CVQ are 35-37dB and 0.2-0.25bit/pel, respectively, for the videophone or video conference type image.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.663-670
• /
• 2001

This paper proposes a new power reduction method for 2D FIR (Finite Impulse Response) filters. We exploited the spatial redundancy of image data in order to reduce power dissipation in multiplication of FIR filters. Since the higher bits of input pixels are hardly changed, the redundant multiplication of higher bits is avoided by separating multiplication into higher and lower parts. The calculated values of higher bits are stored in memory cells, cache such that they can be reused when a cache hit occurs. Therefore, we can reduce power in 2D FIR Filter modules about 15% by using the proposed separated multiplication Technique (SMT).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.93-103
• /
• 2002

A new current mirror for high-accuracy current-mode signal processing and integrated circuit design was proposed. The current mirror adopts the technique of an adaptive feedback to reduce the input impedance and the output stage of regulated cascode current mirror to increase the output impedance. Simulation results show that the current mirror has input impedance of 0.9Ω, the output impedance of 415 MΩ, and current gain of 0.96 at the supply voltage Vcc=5V. The power dissipation is 1.5㎽. In order to certify the applicability of the proposed current mirror, a voltage-to-current converter using the current mirror is designed. Simulation results show that the converter has good agreement with theoretical equation and has three times better conversion characteristics when compared with voltage-to-current converter using Wilson current mirror.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.175-183
• /
• 2011

Performance of digital video watermarking is an assessment that hides a lot of information in digital videos. Therefore, it is required to find a way that enables to store lots of bits of data into a high quality video of the frequency area of digital contents. Hence, this paper designs a watermarking system improving security with an enhancing watermarking based on invisible watermarking and embedding an watermarking on LH and HL subband and its subband by transforming wavelet after the extraction of luminance component from the frames of video by compromising robustness and invisible of watermarking elements. The performance analysis of security of watermarking is carried out with a statistic method, and makes an assessment of robustness against variety of attacks to invisible watermarking. We can verify the security of watermarking against variety of attacks by testing robustness and invisible through carrying out general signal processing like noise addition, lossy compression, and Low-Pass filtering.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.754-764
• /
• 2001

Class A bipolar second-generation current conveyor (CCII) with low current-input impedance and its offset-compensated CCII for high-accuracy current-mode signal processing are proposed. The CCIIs consist of a regulated current-cell for current input, a emitter follower for voltage input, and a cascode current mirror lot current output. In these architecture, the two input stages are coupled by current mirror to reduce the current input impedance. Experiments show that the CCII has impedance of 8.4 Ω and offset voltage of 40 mV at current input terminal. To reduce this offset, the offset-compensated CCII adopts diode-connected npn and pnp transistor in the proposed CCII. Experiments show that the offset-compensated CCII has current input impedance of 2.1 Ω and offset voltage of 0.05 mV. The 3-dB cutoff frequency of the CCIIs when used as a voltage follower extends beyond 30 MHz. The power dissipation is 7.0 mW

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.430-435
• /
• 2018

In this paper, an improved decoding scheme for low-complexity parity-check(LCPC) code with small code length is proposed. The LCPC code is less complex than the turbo code or low density parity check(LDPC) code and requires less memory, making it suitable for communication between internet-of-things(IoT) devices. The IoT devices are required to have low complexity due to limited energy and have a low end-to-end delay time. In addition, since the packet length to be transmitted is small and the signal processing capability of the IoT terminal is small, the LCPC coding system should be as simple as possible. The LCPC code can correct all single errors and correct some of the two errors. In this paper, the proposed decoding scheme improves the bit error rate(BER) performance without increasing the complexity by correcting both errors using the soft value of the modulator output stage. As a result of the simulation using the proposed decoding scheme, the code gain of about 1.1 [dB] was obtained at the bit error rate of $10^{-5}$ compared with the existing decoding method.