• The Korean Journal of Applied Statistics
• /
• v.21 no.6
• /
• pp.959-967
• /
• 2008

The purpose of this paper is to suggest a discrete feature vector, robust in various levels of noisy environment and inexpensive in computation, for detection of speech segments and is to show such properties of the feature with real speech data. The suggested feature is one dimensional vector which represents slope of short term energies and is discretized into three values to reduce computational burden of computations in HMM. In experiments with speech data, the method with the suggested feature vector showed good performance even in noisy environments.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.2
• /
• pp.36-40
• /
• 1993

In order to improve complicated construction and complex control which are disadvantage of optimal PWM technique aimed at harmonic elimination method, this paper presented MRA(Model Reference Adaptive) PWM technique that gatmg signal of inverter is generated by comparing the reference signal with the induced feedback signal at the reference model of load. Design of controller is composed of microprocessor and analog circuit. MRA PWM technique used in the paper is able to compensate the degradation of voltage efficiency to be generated by the ratio of the output voltage to the DC supply voltage being low for using conventional sinusoidal PWM technique. When the trapezoidal signal is employed as the reference signal. the low order harmonics of line current can be reduced and the switching pattern is made by on-line computation using comparatively simple numerical analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.360-369
• /
• 2008

The solar cells should be operated at the maximum power point because its output characteristics were greatly fluctuated on the variation of insolation, temperature and load. It is necessary to install an inverter among electric power converts by means of the output power of solar cell is DC. The inverter is operated supply a sinusoidal current and voltage to the load and the interactive utility line. In this paper, the proposes a photovoltaic system is designed with a step up chopper and single phase PWM voltage source inverter. Synchronous signal and control signal was processed by one-chip microprocessor for stable modulation. The step up chopper is operated in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature for solar cell has typical dropping character. The single phase PWM voltage source inverter is consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be develop continuously by connecting with the source of electric power for ordinary using. It can be cause the efect of saving electric power, from 10 to 20%. The single phase PWM voltage source inverter operates in situation, that its output voltage is in same phase with the utility voltage. The inverter are supplies an ac power with high factor and low level of harmonics to the load and the utility power system.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8S
• /
• pp.2608-2619
• /
• 2000

This paper proposes the Handover Scheme for the mobile and describes the result of the performance analysis. In the conventional scheme of handover request, the withdrawal of terminal may occur because handover request is performed based on fixed signal level without considering network load and terminal mobility. The proposed scheme offers the minimization of withdrawal and handover blocking probability by means of the handover request of terminal based on the network load and terminal mobility. Conventional handover scheme has the sequential procedure that network performs resource check and path rerouting on the handover by MT(Mobile Terminal). Proposed handover scheme pre-processes the resource check before the handover request by predicting the handover request timo so that handover latency can be reduced. Moreover, path optimization is executed after the completion of handover in order to reduce handover latency. The rdduction of handover latency prevents the dropping of service by minimizing backward handover blocking. In summary, we propose the prediction of handover request time and decision method based on terminal, validating the performance of proposed scheme considering various cases of simulation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.157-162
• /
• 2011

This study is about implementing wireless transferring system in pre-hospital cardiopulmonary resuscitation(CPR). Also, this study includes monitoring based feedback between patient and hospital to increase the survival rate of emergency patient by developing the performance of cardiopulmonary resuscitation in pre-hospital. It minimizes the loss of flow rate or gastric inflation through the space between the airway and the esophagus, which enables the inspiration-expiration rate to be measured more precisely. Due to these reasons this study applied ET insertion based respiratory sensor to measure flow rate. The main indices of artificial ventilation are justified from minute respiration(V), end-tidal $CO_2(E_TCO_2)$, and tracheal pressure($P_{tr}$). The simulation is performed to verify the bandwidth and delay time of transport network for in-hospital monitoring even as transporting images and voice information simultaneously. The total bandwidth is 815 kbps, and WLAN (IEEE 802.11x) is used as communication protocol. The network load is under 1.5% and the transmit delay time is measured under 0.3 seconds.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.200-203
• /
• 2001

감성평가 실험시 피험자가 받는 작업부하의 영향을 실시간으로 평가하기 위하여 측정된 심전도 신호로부터 R-peak를 자동적으로 검출하여 심전도 관련 파리미터를 분석하는 시스템을 개발하였다. 이 시스템은 심전도 증폭기, A/D변환기, PC로 구성되었으며 National Instrument 사의 LabVIEW를 사용하여 소프트웨어를 개발하였다. 시스템 동작환경은 Microsoft사의 Window OS를 기반함으로서 시스템 이용자들에게 보다 친숙한 실험환경을 제시할 수 있다. 구현된 시스템은 실시간 HRV, Lorentz plot, LF/HF, HRV power spectrum의 3차원 선도를 디스플레이할 수 있다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.120-127
• /
• 1999

The dead time which is inserted in switching signals of PWM voltage source inverters distorts its output. As a result, the deviations of real fundamental voltage and phase compared with the reference are occurred. And also the harmonics on its output are increased. In this paper, numerical analysis of the distorted voltage on the output of inverter caused by switching dead time is performed. With the calculation results, the fundamental voltage gain and phase deviations according to the modulation index, load displacement factor and dead time are presented.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.210-214
• /
• 2002

집중도 변화와 정신피로는 정의 방향의 평가와 부의 방향의 평가가 있으며, 작업 수행시의 집중변화와 정신피로의 평가는 정의 방향보다 부의 방향으로의 평가가 용이하다. 따라서, 저자들은 먼저 피험자에게 부가할 정신작업부하로 난이도 조정이 용이한 연산작업을 사용하여 작업수행시 가장 높은 집중을 요구하는 하나의 난이도를 선정하고 피험자에게 반복 수행시키면서 생리량과 심리량을 동시에 측정하였다. 측정된 생리량은 뇌파, 심전도, 호흡, 맥파, 말초피부온이며 심리량은 저자들이 개발한 정신피로설문지를 사용하였다. 분석결과 작업수행시 심박변화율의 전력스펙트럼 MF/(LF+HF)비가 감소하였으며, 작업이 반복됨에 따라 집중이 저하되고 정신피로가 증가하였다. 특히, 뇌파의 beta파와 호흡간격이 집중도의 변화를 말초피부온이 정신피로를 잘 반영하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.365-370
• /
• 2002

In this paper external image multi-processing digital signal the transmit is the possibility of doing system with the PCI the design. The bottle-neck which it follows in transmission ratio limit of the CPU and the circumference machineries and tools against the image data which with the improve one thing becomes the processing with the real-time efficiently the transmit and the control is the possibility of doing structure the proposed. The also with the resource amount used 13% reduced which PCI fast data transfer and DMA function. The designed is operation verification against the function and the timing which use Max+plus II.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.231-234
• /
• 2007

The magnetic sensor using electromagnetic principle. which transfers magnatic into electric. is the electric component.It has been widely applied to the industry, university and the reseach. However there are some problems. Not only the korean domestic sensor manufacture skills are still lower then the advanced manufacture's but also production of sensor is not well organized yet. Due to cahnging excitation cvurrent, excitation freq and the rate magnetic permeability core, there sometimes would be distorted phenomena or loaded phenomena which result in limited measurment range. Therefore, the signal conversion device should support to receive undistorted and nice output. This paper focuses on both the design of signal transform circuit using inductive proximity sensor and the signal transfer equipment (Z device) which detects thickness of painted material.