• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.1
• /
• pp.99-104
• /
• 1999

The large scale industry needs high voltage converters. Therefore series connection of power semiconductor devices is necessary. It is important to prevent the overvoltage from being induced across a device above ratings by the proper voltage balancing in the field of IGBT series connection. In addition, the overvoltage induced by a stray inductance has to be limited in the high power circuit. This paper proposes a new gate control scheme which can balance the voltage properly and limit the overshoot by controlling the slope of collector voltage under the turn-off transient in the series connected IGBTs. The proposed gate control scheme which senses the collector voltage and controls the gate signal actively limits the overvoltage. The new series connected IGBT gate driver is made and its validity is verified by the experimental results in the series connected IGBT circuit.

• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.59-66
• /
• 1986

A prototype ultrasound sector B-scanner has been developed where the front-end hardware refers to all the necessary circuits for transmitting the ultrasound pulses into the human body and receiving the reflected echo signals from it. The front-end hardware can generally be divided into three parts, i.e., a pulse generator for insonification, a receiver which is responsible for processing of low-level analog signals, and a steering controller for driving the mechanical sector probe whose functions and design concepts are described in this paper. The front-end hardware is implemented which incorporates the following features: improvement of the axial resolution using a circuit which reduces the ring-down time, flexibility of generating time-gain compensation curve, and adoption of a one-chip microcomputer for generating the rate pulses based on the sensor output waveforms.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.411-419
• /
• 2008

SFC(Static Frequence Converter)system has come to be used as start up drive system for large synchronous motor in many industry applications. Many papers have been presented the control algorithm for pumped storage power generation using SFC system but they did not included about start up algorithm of SFC system for gas turbine. This paper presents the field weakening control algorithm for a large synchronous motor using output signal of anti-windup in PI current regulator and the results of experiment show that the proposed algorithm is proper and effective.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.221-224
• /
• 2005

본 논문에서는 워터마크가 삽입된 데이터의 저작권 보호를 위하여 데이터의 복제 시 신속한 위치추적을 통한 불법 복제 방지 시스템을 제안하고 시뮬레이션 하였다. 제안된 방법은 복사기, 프린터, 스캐너 등에 부착된 워터마크 검출 장치로부터 워터마크 검출 시 원 워터마크 이미지와 추출된 워터마크이미지가 일정 비 이상의 상관관계가 있을 경우 불법 복제 상황으로 간주하고, 디지털 데이터로 변환된 워터마크 이미지와 주소 정보가 전력선을 통하여 전송된다. 수신단에서는 수신된 데이터의 발신자 정보를 통해 위치정보를 알아내어 불법 복제 작업현장의 위치를 추적한다. 전력선을 통신선로로 이용 시 전송신호는 전력선 채널 환경에서 임펄스 잡음에 많은 영향을 받기 때문에 본 논문에서는 제안한 시스템의 검증을 위해 AWGN과 임펄스 잡음을 고려하고 잡음 특성이 우수하고 신뢰성이 비교적 강한 DS-CDMA/BPSK 시스템을 통해 제안된 시스템을 시뮬레이션 하였다. 또한, 열악한 채널 환경으로부터 수신성능을 개선하기 위해 컨벌루션 부호화기법을 적용하여 성능 개선 전 후의 복원 이미지의 성능을 비교 분석 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1089-1094
• /
• 2013

In this study, we propose how th implement a MDDI(Mobile Display Digital Interface) protocol packet generation method in software. MDDI protocol is widely used in mobile display device. MDDI protocol packets are generated by software within micro processor. This method needs the minimum hardware configuration. In order to implementation of this method, we design a hardware platform with a high performance microprocessor and a FPGA. The packets generated by software within microprocessor are converted into LVDS signals, and transmitted by hardware within FPGA. This study suggests the benefits of the way how software can easily create a variety of packet. But, this proposed method takes more time in packet transmission compared to the traditional method. This weakness remains as a future challenge, which can be soon improved.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.554-560
• /
• 1999

In this paper, a vibration suppression method using an energy stored in winding inductance and an induced v voltage of the Linear Stepping Motor(LSM) is shown, and it is applied to a new one-phase excitation method A And a magnetic equivalent circuit is based on the structure of the LSM, and then the electric equivalent circuit of the LSM is derived by solving equations for the magnetic equivalent circuit. Several dynamic characteristics of the LSM are analyzed by the ACSL with the voltage equations, the force equations and the kinetic equation, a and are measured by experimental system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.15-19
• /
• 2005

Conventional eddy current testing has been used for the detection of the defect-like fatigue crack in the conductive materials, such as aluminum, which uses a sinusoidal signal with very narrow frequency bandwidth, Whereas, the pulsed eddy current method uses a pulse signal with a broad bandwidth. This can allow multi-frequency eddy current testing, and the penetration depth is greater than that of the conventional eddy current testing. In this work, a pulsed eddy current instrument was developed for evaluating the metal loss. The developed instrument was composed of the pulse generator generating the maximum square pulse voltage of 40V, an amplifier controlled up to 52dB, an A/D converter of 16 bit and the sampling frequency of 20 MHz, and an industrial personal computer operated by the Windows program. A pulsed eddy current probe was designed as a pancake type in which the sensing roil was located inside the driving roil. The output signals of the sensing roil increased rapidly wich the step pulse driving voltage かn off, and the latter part of the sensing coil output voltage decreased exponentially with time. The decrement value of the output signals increased as the thickness of the aluminum test piece increased.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.15-22
• /
• 2003

A film scanner is one of the input devices for ac acquiring high resolution and high qualify of digital images from the existing optical film. Recently the demand of film scanners have risen for experts of image printing and editing fields. However, due to the nonlinear characteristic of light source and sensor, colors of the original film image do not correspond to the colors of the scanned image. Therefore color correction for the scanned digital image is essential in film scanner. In this paper, neural network method is applied for the color correction to CIE L/sup *//a/sup *//b/sup */ color model data converted from RGB color model data. Also a film scanner hardware with 12 bit color resolution for each R, G, B and 2400 dpi is implemented by using the TMS320C32 DSP chip and high resolution line sensor. An experimental result shows that the average color correction rate is 79.8%, which is an improvement of 43.5% than our previous method, polygonal regression method.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.6-10
• /
• 2015

RF energy harvesting technology is a promising technology for generating the electrical power from ambient RF signal to operate low-power consumption devices(eg. sensor) in wireless communication networks. This paper, motivated by this and building upon existing CR(Cognitive Radio) network model, proposes a optimal control policy for RF energy harvesting CR networks model where secondary users that have low power consumption harvest ambient RF energy from transmission by nearby active primary users, while periodically sensing and opportunistically accessing the licensed spectrum to the primary user's network. We consider that primary users and secondary users are distributed as Poisson point processes and contact with their intended receivers at fixed distances. Finally we can derive the optimal frame duration, transmission power and density of secondary user from the proposed model that can maximize the secondary users's throughput under the given several conditions and suggest future directions of research.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1009-1018
• /
• 2017

We developed new Digital Sampler for KVN(: Korean VLBI Network). The sampler has 1024MHz sampling frequency with 2bits/sample. The sampler's input reference frequencies are 1pps(: pulse per second) and 10MHz, also UTC(: Universal Time Coordinated) time information out with 1PPS signal, synchronized. The output of sampling data is adapted VSI(: VLBI Standard Interface) specification including the time information. In order to confirm the performance of the sampler, we carried out the astronomical radio observation test in Ulsan Radio Observatory of KVN. It was confirmed the stable performance. In this paper, We introduce the new developed sampler and present the observational test result.