• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.82-91
• /
• 1997

In this paper, a design method of the boiler-turbine control system in the coal fired power plant is proposed. We need to control electric output and drum pressure and water level in drum to guarantee stable operation and save energy for generating electricity and decrease air pollution in the boiler-turbine system. This boiler-turbine control system is composed of reference model part and model following part. The multivariable boiler-turbine system is separated into 3 SISO(Single Input Single Output) systems applying the concept of relative gain matrix. Each 3 reference models for separated boiler-turbine system are composed of 1st order nominal plant and hysteresis integral control system and they make good dy¬namic response with no overshoot and fast rising time. Each fuzzy controller to follow as close as possible to the response of each reference model is designed. The robustness and the good tracking property can be achieved using 5150 fuzzy controllers when there are modeling errors, disturbances and parameter pertur¬bations. The effectiveness of the proposed design method is verified through simulations.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2010

This paper presents an implementation of the DisplayPort AUX(Auxiliary) Channel. DisplayPort uses Main link, AUX Channel and Hot Plug Detect line to transfer the video & audio data. For isochronous transport service, source device converts to image and audio data which are to be transported through the Main Link and transports the restructured image and audio data to sink device. The AUX Channel provides link service and device service for discovering, initializing and maintaining the Main link. Hot Plug Detect line is used to confirm the connection between source device and sink device. The AUX Channel is implemented with 3315 LUTs(Look Up Table), 1466 Flip Flops and 168.782MHz max speed synthesized using Xilinx ISE 9.2i at SoC Master3.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.366-366
• /
• 2012

현재 사용되고 있는 투명전극재료 중에 ITO(Indium Tin Oxide)가 가장 투명하면서 전기도 잘 통하고 생산성도 좋다. 투명전극은 비저항이 $1{\times}10^{-3}{\Omega}/cm$이하, 면 저항이 $10^3{\Omega}/sq$이하로 전기전도성이 우수하고 380에서 780 nm의 가시광선 영역에서의 투과율이 80%이상이라는 두 가지 성질을 만족시키는 박막이다. 본 연구에서 X-ray Film을 제작하기 위하여 상용화된 ITO Glass 전극 기판에 X-ray가 조사되면 직접 전자 전공 쌍(electron-hole pair)을 발생시켜 전기적 신호를 발생하는 광도전체 물질(Photoconductor)인 PbO, $PbI_2$, $HgI_2$를 스크린 프린팅(Screen Printing)법을 이용하여 각각 제작하였다. 상부 전극으로 마그네틱 스퍼터링(Magnetic Sputtering) 진공 증착 장치를 사용하여 전류, 전압, 아르곤 및 산소 유입량등을 조절하면서 상부 전극을 증착하였다. 이때 타켓으로 $In_2O_3;SnO_2$ (조성비:90:10wt%)를 사용 하였고, base pressure는 $9{\times}10^{-7}torr$, deposition pressure는 $3{\times}10^5torr$를 고정하였다. 또한 전류와 전압은 각각 0.4A, 800V로 유지하고, $O_2$:0.3 ppm, Ar의 경우 4.9 ppm에서 70 ppm까지 올려 플라즈마를 활성화 시킨 후 90초 동안 ITO를 증착하였다. 본 실험에 제작된 박막으로 X-ray을 조사하여 검출기로써 특성 평가를 실시하였으며, 실험결과 X-선 투과와 전도성 등 두가지 특성이 동시에 만족 될 만한 성능을 가질 수 있음을 확인 할 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.55-62
• /
• 2006

For the fault diagnosis of three-phase induction motors, we construct a experimental unit and then develop a diagnosis algorithm based on pattern recognition. The experimental unit consists of machinery module for induction motor drive and data acquisition module to obtain the fault signal. As the first step for diagnosis procedure, preprocessing is performed to make the acquired current simplified and normalized. To simplify the data, three-phase current is transformed into the magnitude of Concordia vector. As the next step, feature extraction is performed by kernel principal component analysis(KPCA) and linear discriminant analysis(LDA). Finally, we used the classifier based on radial basis function(RBF) network. To show the effectiveness, the proposed diagnostic system has been intensively tested with the various data acquired under different electrical and mechanical faults with varying load.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.123-127
• /
• 2014

We developed a digital 3-axis flux-gate magnetometer for magnetic field signal measurement from warship during demagnetizing and degaussing processes. For the magnetometer design, we considered following points; the distance between magnetic field measurement station and magnetometer located under sea is about several 100 m, the magnetometer is exposed to magnetic field of ${\pm}1mT$ during demagnetizing process, and magnetometer is located under the sea about 30 m depth. To overcome long distance problem, magnetometer could be operated on wide input supply voltage range of 16~36 V using DC/DC converter, and for the data communication between the magnetometer and measurement station a RS422 serial interface was employed. To improve perming effect due to the ${\pm}1mT$ during demagnetizing process, magnetometer could be compensated external magnetic field up to ${\pm}1mT$ but magnetic field measuring rang is only ${\pm}100{\mu}T$. The perming effect was about ${\pm}2nT$ under ${\pm}1mT$ external magnetic field. The magnetometer was tested water vessel with air pressure up to 6 bar for the sea water pressure problems. Linearity of the magnetometer was better than 0.01 % in the measuring range of ${\pm}0.1mT$ and noise level was $30pT/\sqrt{Hz}$ at 1 Hz.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.31-38
• /
• 2005

In this paper, we propose the chromatic adaptation models (CAM) for the variations of the luminance levels. A chromatic adaptation model, CAM$\Delta$Y , is proposed according to the change of luminance level under the same illuminants. The proposed model is obtained by the transform the test colors of the high luminance into the corresponding colors of the low luminance. In the proposed model, the optimal coefficients are obtained from the corresponding colors data of the Breneman's experiments. In the experimental results, we confined that the chromaticity errors, $\Delta$u'v', between the predicted colors by the proposed model and the corresponding colors of the Breneman's experiments are 0.004 in u'v' chromaticity coordinates. The prediction performance of the proposed model is excellent because this error is the threshold value that two adjacent color patches can be distinguished. Additionally, we also propose equal-whiteness CCT curves (EWCs) by CAM$\Delta$Y according to the luminance levels of the surround viewing conditions. And the proposed EWCs can be used as the theoretical standard which determines the reference white of the color display devices.

• Geophysics and Geophysical Exploration
• /
• v.8 no.3
• /
• pp.224-231
• /
• 2005

In geophysical field surveys, commercial equipments often fail to resolve the subsurface target or even sometimes fail to be applied because they do not fit to the various field situations or the physical properties of the medium or target. We developed a geophysical measurement system, which can be easily adapted for the various field situations and targets. The system based on PXI with A/D converter and some stand alone equipment such as Network Analyzer was applied to borehole radar survey, borehole sonic measurement and electromagnetic noise measurement. The system for borehole radar survey consists of PXI, Network Analyzer, dipole antennas, GPIB interface is used for PXI to control Network Analyzer. The system for borehole sonic measurement consists of PXI, 24 Bit A/D converter, high voltage pulse generator, transmitting and receiving piezoelectric sensors. The electromagnetic noise measurement system consists of PXI, 24 Bit A/D converter, 2 horizontal component electric field sensors and 2 horizontal and 1 vertical component magnetic filed sensors. The borehole radar system has been successfully applied to detect the width of the artificial tunnel through which the borehole pass and to image buried steel pipe, while the commercial borehole radar equipment failed. The borehole sonic system was tested to detect the width of artificial tunnel and showed a reasonable result. The characteristic of electromagnetic noise was grasped at an urban area with the data from the electromagnetic noise measurement system. The system is also applied to characterize the signal distortion by induction between the electric cables in resistivity survey. The system can be applied various geophysical problems with a simple modification of the system and sensors.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.786-789
• /
• 1996

An image processing system was built to evaluate the color properties of apple and meat. The system consisted of video camera, video card, 32 bit microcomputer and an optical illuminator. The operating software was developed to carry out capturing, analyzing, displaying and storing of the 8 bit digitized images of food. The images of apples at various maturing stages were investigated to obtain the color histogram of R, G, B and Hunter value. RGB histogram showed a major difference in G value, 35.01, the minor change in R value, 6.16, and the negligible difference in B value. The image of beef cut was separated into two parts, fat and lean tissue, by applying threshold value method based on the digital value of color. The threshold value for fat was over 240 and for lean under 230 in R value, respectively. The resulting non fat image showed 2% decreased color difference value, ${\Delta}E$, than whole meat cut.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.68-76
• /
• 2018

In this paper, we describe the correlation processing method of multi-polarization observation data of the Daejeon Correlator. VLBI observations include single or multiple polarized observations depending on the type of object. Polarization observations are performed to observe the characteristics of the object. During the observations of the celestial object, polarization measurements are also performed to determine the delay values and causes of changes in the object. Correlation processing of polarization observation data of the Daejeon correlator is proposed by OCTAVIA of a synchronous reproduction processing apparatus that outputs data input to each antenna unit by using an output bit selection function to convert bits and the order of the data streams is changed, And the input of the Daejeon correlator is configured to perform the polarization correlation processing by conducting correlation processing by setting the existing stream number to be the same. Correlation processing is conducted on the test data observed for the polarization correlation processing and it is verified through experiments that the polarization correlation processing method of the proposed Daejeon correlator is effective.