• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.60.1-60.1
• /
• 2010

공동주택에서 태양광발전(PV)을 통한 세대 전기에너지 이용은 모듈 설치 면적의 제약으로 인해 전 세대를 대상으로 활용하기에 현실적으로 어려움이 있다. 특히 남향이나 남동, 남서향으로 위치한 거실 창호를 활용하는 경우에도 결정질 실리콘(crystalline silicon) 태양전지 셀로 인한 실내 음영문제 등으로 건물통합형 태양광발전(BIPV) 시스템의 가시성을 확보하는데 한계가 있다. 따라서 이런 문제점을 극복하고자 투광형 비정질실리콘(amorphous silicon) 태양전지를 이용한 발코니창호/커튼월 BIPV 시스템을 구축하고, 테스트베드를 통한 적용성 평가 검증을 수행하였다. 테스트베드는 KCC 중앙연구소 1층 외부 측창에 결정질 BIPV 모듈(A2PEAK 사(社), 최대 출력 210 Wp, W 2,000 mm ${\times}$ H 1,066 mm)과 10% 및 30% 투광형 비정질 BIPV 모듈(Sharp 사(社) See Through type, 최대 출력 135 Wp/123 Wp, W 1,930 mm ${\times}$ H 1,180 mm)을 각각 설치(남서 $30^{\circ}$, 수직 $90^{\circ}$)하여, 2009년 5월에서 8월 사이 4개월에 걸친 모니터링을 통해 실제 발전량 데이터를 확보, 시스템에 대한 분석을 진행하였다. 분석 결과, 설치용량당 일평균 발전량은 결정질형이 1.46 kWh/kWp, 10% 투광형은 1.10 kWh/kWp, 30% 투광형은 0.73 kWh/kWp을 나타내었다. 10% 투광형과 30% 투광형의 모듈 성능 차이는 크지 않으나 발전량에 있어서는 큰 차이를 보였고, 10% 투광형의 설치용량당 일평균 발전량은 경정질형의 75.2% 수준으로 투광형 비정질실리콘 BIPV 시스템의 창호 적용 가능성을 확인하였다. 특히 세대 거실 창호를 통한 가시성 확보는 기존 결정질 BIPV 창호의 단점을 개선하였다. 건자재 일체화로 구축된 가시성확보 BIPV시스템 창호는 단위 세대별 적용이 쉽고, 공동주택에서 PV 시스템의 설치면적을 극대화시키므로 향후 Zero Energy 공동주택 구축에도 활용성이 클 것으로 기대된다.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.1
• /
• pp.77-87
• /
• 2001

The authors have studied the 8 weeks clinical experiment on 34 dental patients of age 20s for control group and 32 for experimental 1 group(Paste Type Dentifrice with Bamboo Salt, Chitosan and Powder of Pine Needles and Leaves of Bamboo.) and 32 for experimental 2 group(Powder Type Dentifrice with Bamboo Salt, Chitosan and Powder of Pine Needles and Leaves of Bamboo), in order to find out the effect of plaque removal, prevention of calculus and stain formation. and Gingival effect. The obtained results are as following. 1. Plaque removal effect was the similar level on group 1 and on group 2 as control group. 2. For prevention of calculus formation, there was a little bit better on group 1 at 8 weeks, and for prevention of stain formation, it revealed more or less difference between on group 1, group 2 and control group at 8 weeks. 3. on PMA index, it revealed the significantly differences between group 1, group 2 and the control group at 8 weeks(p<0.05), so it is estimated that there might be signified for gingival subside effect by use of dentifrice with Bamboo Salt, Chitosan and Powder of Pine Needles and Leaves Bamboo.

• Journal of Powder Materials
• /
• v.13 no.5 s.58
• /
• pp.313-320
• /
• 2006

The present study is to analyze the thermoelectric properties of $Bi_{0.4}Sb_{1.6}Te_3$ thermoelectric materials fabricated by the mechanical grinding process. The $Bi_{0.4}Sb_{1.6}Te_3$ powders were prepared by the combination of mechanical milling and reduction treating methods using simply crushed pre-alloyed $Bi_{0.4}Sb_{1.6}Te_3$ powder. The mechanical milling was carried out using the tumbler-ball mill and planetary ball mill. The tumbler-ball milling had an effect on the carrier mobility rather than the carrier concentration, whereas, the latter on the carrier concentration. The specific electric resistivity and Seebeck coefficient decreased with increasing the reduction-heat-treatment time. The thermal conductivity continuously increased with increasing the reduction-heat-treatment time. The figure of merit of the $Bi_{0.4}Sb_{1.6}Te_3$ sintered body prepared by the mechanical grinding process showed higher value than one of the sintered body of the simply crushed powder.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.69-72
• /
• 2020

In this study, the inverted structured electroluminescence (EL) devices were fabricated with double electron transport layers (ETLs). The conduction band minimum (CBM) of TiO₂ NPs is lower than SnO₂ NPs. Therefore, it is expected that inserting TiO₂ NPs between the SnO₂ layer and the emission layer (EML) will reduce the energy barrier and transport electrons smoothly. The quantum dot light emitting diodes (QLEDs) with double ETLs showed the enhanced emission characteristics than those with only SnO₂ layer.

• The Journal of the Korean dental association
• /
• v.49 no.1
• /
• pp.38-44
• /
• 2011

The aim of this study is to evaluate the patient's and clinician's response to rapid oral HIV screening test. Attitude assessment survey was carried out on patients test with rapid oral HIV screening test and clinicians who conducted the test. The patients and clinicians were present at the dental hospital and clinics which were participating in the research project, between March and May 2010. Rapid oral HIV screening test is safe and efficient to the patients. It also demonstrated reliability to accuracy and confidentiality, and high recommendation to rapid oral HIV screening test. The clinician survey revealed high test convenience and high appraisal to patient satisfaction. In conclusion, if rapid oral HIV screening test becomes more common, patients will receive safe and convenient and high reliable HIV infection test, while clinicians will be able to create safe dental care environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.209-222
• /
• 1993

This article is a case study of the ground improvement project which was carried out for manmade landfill. The project area is located near to Kapchun, Teajon and composed of the municipal wastes dumped, demolished building debris, coal ash and industrial waste made between 1983 and 1989. The DDC(dynamic deep compaction) based on the results of the test compaction at two representative locations was carried out from March 16, 1992 to Oct. 25, 1992. Field measurements and laboratory tests were carried out for ground improvement assessment and quality control for the DDC(dynamic deep compaction) work. From the results of field measurements and laboratory tests, it was found that the DDC work was successful: waste landfill was compressed considerably (${\fallingdotseq}$ 15% of full depth); and the strength was increased satisfactorily (${\fallingdotseq}$ 100% of original penetration resistance), Also, it is expected that the results of this work could be a guide to the future DDC work with the similar ground conditions, i.e. man-made landfills.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1586-1592
• /
• 1999

In DWMT, CMFB is employed in the synthesis/analysis part. The CMFB uses filters of greater length than the DFT, resulting in reduced interference between the carriers. In addition, the CMFB system is computationally efficient and fast algorithms are available for their implementation. Traditional designs for the prototype filters of CMFB usually involve nonlinear optimizations. Thus the required design time is considerably large even for small filter orders. In this paper, a prototype filter design method for CMFB is presented using optimal window method. The design process is reduced to the optimization of a single parameter and consequently the required design time is much less than those of the existing methods. It is shown that the stopband performance of the proposed method is better than that of the Kaiser window method.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.478-492
• /
• 1996

For parallel implementations of functional programs without concurrent primitives, the λ-calculus encodings have been introduced. A functional program may be trans for med into a process network using process calculiby the λ-calculus encoding and there sult of a program can be obtained by a deal of communication actions in it's process network. But the λ-calculus encodings cause too many communication actions even in constant expressions. This paper shows the encoding for a combinator program without concurrency primitives which can combine the graph reduction and the process-net reduction using computable processes,'chores'. A 'chore' may have graph reduction functions for primitive operations of constants for which local graph reduction may be possible, and be encoded from a 'G-reducible' subexpression which is obtained by an annotation and trans for mati-on for a combinator program, assuring that it does not include any combinator application. Also, we show that a process network with chores raises less commu-nication actions than one without chores.

• Journal of Climate Change Research
• /
• v.5 no.4
• /
• pp.331-338
• /
• 2014

The continued efforts to reduce GHG emission by international cooperation and each country are in progress. As part of these efforts, Korea's ETS is enforced in 2015. This was the time to make strategies for each company to respond Korea's ETS. This study was performed to suggest a draft of basic strategies for electronic component industry in current Korea's ETS stage are as follows; - Analyzing the nature of electronic component industry - Identifying needs for corresponding ETS of electronic component industry - Analyzing basic countermeasures for each stage of ETS - Suggesting drafts of basic strategies for electronic component industry in current Korea's ETS stage The result of this study, the current stage of Korea's ETS is moving from implementation of the scheme become determined and prepare the minimum corresponding to direct corresponding to the regulation and market change. Electronic component industry has many GHG emission growth(or change) factor, and it will be make electronic component industry as a buyer when Korea's ETS is enforced. Korea's ETS will be clearly act as a regulation rather than new business for electronic component industry. Therefore, identifying the Korea's ETS as a regulation is resonable strategy for corresponding the scheme. The basic strategies of electronic component industry th responding Korea's ETS are as follows; - Building internal organization and decision-making system before enforcement the Korea's ETS - Establishing internal basic corresponding strategies according to carbon price forecast scenarios - Considering the energy consumption and GHG emissions in design phase and preparing the global ETS market in mid or long term.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.209-216
• /
• 2019

Lead isotope ratios in horse-shaped bronze buckles excavated from the Songjeol-dong site in Cheongju and the mid-western region of the Korean Peninsula have been determined by thermal ionization mass spectrometry. The lead isotope ratios of the samples with data provenance were plotted in zone 3 of the South Korean galena map. The results indicated that the horse-shaped bronze buckles could be made using galena located in the same area as the archaeological site. These results can be used as basic data for comparison purposes in future studies on the manufacturing technology and provenance of bronze artifacts.