• Journal of Wetlands Research
• /
• v.10 no.2
• /
• pp.1-14
• /
• 2008

This study was to describe the ecological survey of wetland plants from Sinbul Mt. and suggest the ways of the sustainable ecological management and wise use. We found 167 plant species. Molinia japonica HACK was the most dominant species and Asarum maculatum NAKAI, Drosera rotundifolia L. and Utricularia racemosa WALL were considered as the most important species. Thus, it was concluded that this area need strong conservation due to the necessity for species diversity. Such several management schemes as the designation for national wetland conservation area, continuous monitoring, cautious surveillance and wise management were suggested to implement successful conservation.

• Proceedings of the KGS Conference
• /
• 2004.05a
• /
• pp.42-42
• /
• 2004

습지는 각종 영양물질의 원천지(source), 저장지(sink), 혹은 변환지(transformer)의 역할을 한다. 습지 역할의 차이는 습지의 유형이나 수문조건, 그리고 습지에 특정 물질이 영향을 주는 시간에 의하여 다르게 나타날 수 있고, 습지에 인접한 주변 환경과의 관계에 의하여 다르게 나타날 수 있다. 현재 국내에 보고된 산지습지 대해서는 이러한 역할에 대한 논의가 부족하고, 타 습지에 비해 산지습지의 지화학적인 특성에 대한 연구가 부족하다. (중략)

• The Korean Journal of Ecology
• /
• v.28 no.2
• /
• pp.85-92
• /
• 2005

This study emphasizes syntaxonomy and syndynamics of intermediate (Zwischen) moor (area: 14,000 $m^2$) at Mt. Shinbul in Yangsan, southeastern Korean Peninsula. A total of 105 vascular plant species including 26 monitor-species were recorded. Analysis by the $Z\"{u}rich$-Montpellier School's method distinguished eight vegetation units: Eleocharitis-Blyxetum echinospermae ass. nov., Eriocaulon sikokianum-Utricularia racemosa community, Eleocharis wichurai-Molinia japonica community, Platanthero-Molinietum japonicas, Miscanthus sinensis for. purpurascens community, Tripterygium regelii community, Symplocos chinensis-Quercus mongolica community, Symplocos chinensis-Quercus dentata community. PCoA (Principal Coordinates Analysis) shows that vegetation changes and distributional aspects are associated with both moisture condition and sunlight on the ground layer and soil nutrient level (mesotrophic to oligotrophic). Most important to Molinietea japonicas being representative intermediate moor vegetation at the southeasternmost fringe of the Korean Peninsula is the local cooling effect by mountainous cloud and mist zone resulting in shorter and wetter growing season. The Yangsan moor vegetation was compared with earlier descriptions of related Mujechi moor from anthropogenic and natural moor vegetations.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.106-113
• /
• 2010

We were tried to draw a conclusions related to additive amount of gypsum in blast furnace slag in the study. In the result, fluidity of concrete decreased with an increase of gypsum and was not satisfied with KS standard in the cases of natural gypsum and limestone sludge more than 2.6% addition. Early compressive strength of concrete containing desulfurized gypsum, fluosilicic acid gypsum and phosphoric acid gypsum were improved respectively but calcined lime sludge and lime powder were not influenced on strength. If available, additive gypsum should be managed less than 2.0% owing to low fluidity. In low temperature, fluosilicic acid gypsum was to advantages on the fluidity while desulfurized gypsum was in high temperature. There also are conclusions that additive gypsum was to be 2.6% in winter and in summer; it's to be fewer than 2.6%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.48.1-48.1
• /
• 2010

Mono-crystalline silicon solar cell is fabricated by using alkali metals. These alkali metal, used in wet etching process, must be removed for the high efficiency solar cell. As wet etching process has been adapted due to its low cost. But lots of alkali metals like potassium remains on the silicon surface and acts as impurities. To remove these alkali metals many of cleaning process have to be applied when solar cell manufacturing process. In terms of alkali metal removal, modified etchant solution is required for concise cleaning process. In this paper ethylenediamine was used and proposed for the substituion of postassium hydroxide.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.89.2-89.2
• /
• 2010

고체산화물 연료전지는 $800{\sim}1000^{\circ}C$인 고온에서 작동하므로 적용되는 밀봉재의 요구조건은 매우 중요하다. 본 연구에서는 SOFC 밀봉재로서 $SiO_2-B_2O_3-RO$계 결정화 유리를 선정하였으며 작동온도 부근에서 결정화를 유도하여 고온점성유동을 제어하고자 하였다. 따라서 $SiO_2-B_2O_3-RO$계에 RO인 CaO, SrO, BaO, MgO를 상호 치환하였을 때 결정상의 생성, 생성온도, 생성결정의 종류가 sealing 특성에 어떠한 영향을 주는가를 검토하였다. 결정화유리를 $800^{\circ}C$로 유지하였을 때 생성되는 주 결정상은 Calsium silicate, Strontium silicate, Barium silicate, Magnesium silicate이였으며 Strontium silicate 의 생성속도가 가장 빨랐으며 결정상은 불산으로 에칭하여 SEM으로 관찰하였다. Barium silicate를 유도한 결정화 유리가 $800^{\circ}C$에서 1000시간 유지하였을 경우 가장 내화학성이 우수하며 강도값도 154MPa로 가장 높았다. 또한 부분 결정화를 통해 $800^{\circ}C$ 점성유동이 제어됨을 고온현미경을 통해 관찰하였다.

• Journal of Environmental Science International
• /
• v.18 no.5
• /
• pp.561-567
• /
• 2009

The distribution of benthic macroinvertebrates of Shinbulsan wetland was investigated. This study was focused on the degree of recovery of habitat by comparing the community structure of benthic macro invertebrates of zone D to that of zone A, intact habitat. The zone D was destructed due to the construction of a golf club and the survey was performed in zone A and zone D of Shinbulsan wetland. The seasonal survey was performed in April, July and September from 2006 to 2007. From the sampling, 2 phyla, 3 classes, 9 orders, 31 families, 69 species and 1155 individuals of benthic macroinvertebrates were collected. From zone A, 2 phyla, 3 classes, 9 orders, 23 families, 54 species and 678 individuals were identified. From zone D, 2 phyla, 3 classes, 9 orders, 23 families, 43 species and 477 individuals were identified. Species diversity and species richness were higher in zone A than in zone D. The recovery of zone D was inefficient as humidity of soil was not enough to live macroinvertebrates. Also, an endangered species of macroinvertebrates, Nannophya pygmaea was found during this investigation.

• Journal of Environmental Science International
• /
• v.29 no.11
• /
• pp.1079-1088
• /
• 2020

The Shinbulsan wetland, located in Yangsan-si, Gyeongsangnam-do, South Korea, was designated as a conservation area in 2004. The area was monitored from 2015 to 2019 to investigate the community characteristics and changes of benthic macroinvertebrates. Between 2015 and 2016, several insects of the orders Ephemeroptera, Odonata, and Hemiptera were identified, but their numbers decreased significantly in 2017 and 2018 following the loss and recovery of the moor owing to drought. During this period, there were relatively more insects of the order Diptera. Within this order, three functional feeding groups, gathering-collectors, plant-piercers, and predators were investigated. Predator species were the most abundant (83.3%), whereas gathering-collectors accounted for the largest proportion of individual insects (50.5%). Between 2015 and 2016, when the moors were stable, groups I and III had the highest community stability. After 2017, when the moors had dried up, group III effectively disappeared because of its lower relative resistance and resilience, and only taxa belonging to group I remained. The results of this study indicate that benthic macroinvertebrates that adapt early during moor formation inhabit the Shinbulsan wetland.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.264.2-264.2
• /
• 2014

비휘발성 메모리는 전원이 공급되지 않아도 저장된 정보를 계속 유지하는 메모리로써 현재 다양한 차세대 전자소자의 집적화 구현을 위해 저전압 동작 및 저장능력의 향상 등에 대한 연구가 활발히 진행되고 있다. 이때 삽입되는 전하저장층의 경우 기존 널리 이용되는 질화막(SiNx) 외에 최근에는 산화 알루미늄(Al2O3) 등의 고유전상수 물질 뿐만 아니라, 밴드갭 조절을 통해 전하저장능력을 향상시키는 산화막(SiOx)에 대한 연구도 진행 중이다. 이번 연구에서는 전하저장능력을 향상시키기 위해 전하저장층으로 산화막을 이용할 뿐만 아니라, 기존의 평편한 구조가 아닌 표면 조절을 통해 전하저장능력을 보다 향상시키고자 한다. 또한 이번 연구에서는 비휘발성 메모리 소자의 응용을 위해 우선적으로 금속-절연체-반도체 형태의 MOOxOyS 구조를 이용하였다. 이 때 실리콘 표면적을 변화시키기 위해 이용된 실리콘 웨이퍼는 1) 평편한 실리콘, 2) 수산화암모늄, 이소프로필 알코올 및 탈이온수를 혼합한 용액에 식각시킨 삼각형 구조, 3) 불산, 질산 및 아세트산을 혼합한 용액에 식각시킨 라운드 구조이다. 정전용량-전압 측정을 통해 얻어진 메모리 윈도우는 1) 평편한 실리콘의 경우 약 5.1 V, 2) 삼각형 구조의 경우 약 5.3 V, 3) 라운드 구조의 경우 약 5.9 V를 얻었다. 이 때, 라운드 구조의 경우 가장 넓은 표면적으로 인해 상대적으로 전하트랩이 가장 많이 되어 메모리 윈도우가 가장 커지는 특성을 볼 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.248-250
• /
• 2009

고효율 태양전지를 위한 결정질 태양전지의 구조 중 UNSW에서 개발한 BCSC(buried contact solar cell)가 있는데, 이는 전면 전극을 laser 처리 후 무전해 니켈 도금으로 형성한 것이다. 이같은 전면 전극을 형성하기 위해서는 무전해 nickel 도금 후 열처리가 필수적이다. 우리는 이 공정을 확립하기 위해 결정질 wafer에 후면을 PECVD로 SiNx막을 형성하여 $30\Omega/\square$로 도핑한 후 후면을 불산으로 제거한 상태에서 양면을 니켈 무전해 도금으로 전극을 형성하여 $300^{\circ}C,\;350^{\circ}C,\;400^{\circ}C$에서 각각 3,6,9분간 진행하였다. 그 결과 $400^{\circ}C$에서 3분간 열처리된 sample이 상대적으로 가장 명확한 IV curve를 형성하였다. 이 실험의 결과는 PN 접합 구조에서 전극을 nickel로 사용할 때 유용하게 사용될 수 있다.