• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.202-210
• /
• 2018

Recently, the subway running in metro environments has a problem in securing the safety of passengers due to the failure of announcement in emergency situations such as breakdown, train accidents and power outage in the underground tunnels. Thus, there is a need to develop an emergency broadcasting system that can provide the announcement to all passenger cars in any emergency situations on the railway route. In this paper, the applicability of various wireless communication technologies for the emergency broadcasting system through the measurement campaign was examined in Seoul metropolitan subway. A WAVE(Wireless Access in Vehicular Environments) is communication technology that can use 5.9GHz dedicated frequency band without charge and it is possible to directly communicate between terminals over 200m without the help of additional relay. Especially, it confirms robust communication performance in the various metro environments, and therefore, it is considered to be suitable as a communication method of a radio-connected emergency broadcasting system for urban subway.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.138-146
• /
• 2024

Purpose: The purpose of this study is to find cases of using information and communication technology and smart mobility technology in snow removal vehicles and equipment for rapid and efficient road snow removal in the event of a snowstorm, and to find ways to utilize them. Method: Cases of domestic and overseas snow removal methods are investigated, and snow removal operation methods incorporating new technologies are presented. Result: Most of the operation of snow removal equipment in Korea uses GPS, CCTV, and road traffic information systems, and in the case of overseas, road weather information systems and road snow removal monitoring systems are used. It is expected that snow removal technology using autonomous snow removal vehicles, which are smart mobility, will be developed in the future. Conclusion: The results of this study can contribute to the policy of using snow removal equipment and snow removal vehicles of local governments and related organizations.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.37-40
• /
• 2009

불소가 도핑된 산화주석(SnO2:F, FTO) 박막은 다결정 전도성 세라믹으로 가시광선 영역에서 투명하기 때문에 태양전지의 전극으로 활용된다. 본 연구에서 FTO는 APCVD법으로 성막되었다. BSG기판을 사용하여 $620^{\circ}C$의 고온에서 공정이 진행되었다. 이렇게 제작된 FTO 박막은 수소, 질소, 대기 분위기에서 여러 열처리 시간을 변수로 실험하여 열처리 전후의 전기적, 광학적, 구조적 변화를 관찰하고 분석하였다. 전기적 특성 분석에는 전기 비저항, 모빌리티 및 캐리어 농도 등의 변화를 알아보았고, 광학적 분석에는 UV-vis spectoscopy로 200nm에서 800nm 파장대역의 투과도를 구하고, Hazemeter를 통하여 총투과율, 평행투과율, 확산투과율 및 Haze를 분석하여 FTO막이 가지고 있는 texturing에 의한 효과를 알아보기 위하여 시편의 열처리 전후를 비교 분석하였다. 구조적 분석은 XRD를 이용하여 pattern을 분석하여 FTO가 가지는 구조변화를 분석하였다. 특히 FTO의 texturing에 기여도가 높은 (200)면의 XRD peak강도가 상승함에 따라 후열처리에 의해 박막의 표면의 변화가 일어남을 확인하였다. FTO의 후열처리에 의한 변화는 전기적으로는 약간의 전기 비저항의 증가를 가져오며, 캐리어 농도의 감소를 가져온다. 캐리어 농도의 감소에 따라 모빌리티의 상승이 관찰되었다. 광학적 특성은 가시광선 영역에서 투과율은 거의 같거나 약간 감소하는 경향을 나타내며, 후열처리 전후에 거의 동일한 투과율을 보이면서도 확산 투과율이 상승하는 분석 결과를 얻었다.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.127-135
• /
• 2021

To respond to the threat of global warming, countries around the world are promoting the spread of renewable energy and reduction of carbon emissions. In accordance with the United Nation's Sustainable Development Goal to combat climate change and its impacts, global automakers are pushing for a full transition to electric vehicles within the next 10 years. Electric vehicles can be a useful means for reducing carbon emissions, but in order to reduce carbon generated in the stage of producing electricity for charging, a power generation system using eco-friendly renewable energy is required. In this study, we propose a smart electric mobility operating system integrated with off-grid solar power plants established in Tanzania, Africa. By applying smart monitoring and communication functions based on Arduino-based computing devices, information such as remaining battery capacity, battery status, location, speed, altitude, and road conditions of an electric vehicle or electric motorcycle is monitored. In addition, we present a scenario that communicates with the surrounding independent solar power plant infrastructure to predict the drivable distance and optimize the charging schedule and route to the destination. The feasibility of the proposed system was verified through test runs of electric motorcycles. In considering local environmental characteristics in Tanzania for the operation of the electric mobility system, factors such as eco-friendliness, economic feasibility, ease of operation, and compatibility should be weighed. The smart electric mobility operating system proposed in this study can be an important basis for implementing the SDGs' climate change response.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.3
• /
• pp.132-139
• /
• 2022

UAM(Urban Air Mobility)은 가까운 미래에 현실이 되는 항공교통 체계로 미래 첨단 기술의 결정체이다. 비행은 인간의 생명을 절대 보장하는 숭고한 철학에 기반한다. 성공적인 UAM 개발을 위해서는 비행안전에 기초한 개발철학이 필요하며 올바른 방향을 제시해야 한다. UAM 체계와 유사한 항공교통체계는 민간항공 운항체계이며 UAM 체계의 개발을 도모하는 효과적 비교 연구대상이다. 본 연구는 민간항공 운항체계와 민간항공 조종사의 경험을 토대로 안전한 UAM 체계 개발의 방향을 제시하는 데 있다. 그중에서도 UAM 조종사 양성과 교육훈련체계 수립을 위한 방안을 제언하였다. 현존 관련법규를 검토하여 UAM 조종사 양성기준을 제시하였으며 초기 혼란을 방지하기 위한 대안을 포함하였다. 또한 민간항공기의 접근구간 항법성능을 측정하여 UAM 운항환경을 비교 예측하였다. 이를 통해 SMS 기법에 기반하여 UAM 체계의 위해요인(hazard)을 식별하여 미연에 사고를 예방할 수 있는 안전 방법론을 제시하였으며 UAM 로드맵의 올바른 정책 수립을 돕고자 한다.

• Electronics and Telecommunications Trends
• /
• v.21 no.3 s.99
• /
• pp.23-35
• /
• 2006

3GPP는 HSPA와 같은 라디오 액세스 기술의 개선을 바탕으로 다가오는 수 년 동안 높은 경쟁력을 가질 것으로 예측된다. 그러나 3GPP에서는 급속히 발전되는 정보통신서비스를 효율적으로 제공하기 위해, 3GPP R6 기술과 비교하여 사용자와 사업자의 비용을 줄이면서도 고품질의 다양한 서비스를 제공하는 새로운 이동통신기술의 필요성을 인식하고, 낮은 전송 지연(low latency), 높은 전송률(high data rate), 시스템 용량과 커버리지를 개선하는 3G long term evolution 표준기술 작성을 시작하였다. 이에 따라 지난 2004년 말부터 3GPP에 참여한 사업자, 벤더, 연구소 등은 2007년 6월 표준규격작성완료를 목표로 LTE와 SAE에 대한 연구를 진행해 오고 있다. 이들 연구는 상호 운용성을 제공하기 위한 기술적 솔루션을 최소로 하면서 불필요하게 중복되는 필수 특성들을 줄이고 다양한 액세스 네트워크 사이에서 모빌리티를 제공하는 것을 목적으로 하고 있다. 본 문서에서는 2006년 3월까지 진행된 3GPP의 표준화 및 기술 동향에 대해살펴본다.

• Composites Research
• /
• v.36 no.1
• /
• pp.1-15
• /
• 2023

Demand for energy consumption reduction is increasing according to the development expectations of future mobility. Lightweight structural materials are known as a method to reduce greenhouse gas emissions and improve energy efficiency. In particular, fiber reinforced polymer composite (FRP) is attracting attention as a material that can replace existing metal alloys due to its excellent mechanical properties and light weight. In this paper, industrial applications and research trends of carbon fiber reinforced composites (CFRP, carbon FRP) and self-reinforced composites (SRC) were reviewed based on the reinforcement, polymer matrix, and manufacturing process. In order to overcome the expensive process cost and long manufacturing time of the epoxy resin-based autoclave method, which is mainly used in the aircraft field, mass production of CFRP-applied electric vehicles has been reported using a high-pressure resin transfer molding process including fast-curing epoxy. In addition, thermoplastic resin-based CFRP and interface enhancement methods to solve the recycling issue of carbon fiber composites were reviewed in terms of materials and processes. To form a perfect matrix-reinforcement interface, which is known as the major factor inducing the excellent mechanical properties of FRP, studies on SRC impregnated with the same matrix in polymer fibers have been reported. The physical and mechanical properties of SRC based on various thermoplastic polymers were reviewed in terms of polymer orientation and composite structure. In addition, a copolymer matrix strategy for extending the processing window of highly drawn polypropylene fiber-based SRC was discussed. The application of CFRP and SRC as lightweight structural materials can provide potential options for improving the energy efficiency of future mobility.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.471-476
• /
• 2021

Personal mobility (PM) is a new concept of transportation used by one or two people using electricity. Personal transportation aims to move quickly and conveniently over an ambiguous distance that is too close to the destination and too far to walk. In particular, as electric kickboard sharing services have become more common in recent years, they are receiving great popularity from citizens. However, it is necessary to come up with an alternative solution as it is acting as a risk not only to users but also to pedestrians and road drivers. Therefore, in order to present measures to establish and improve a safe personal mobility utilization environment, this research was conducted as follows. First, based on GPS data from shared electric kickboards, the usage status in everyday life was examined and analyzed in detail. Second, it is convenient to rent and return shared electric kickboards directly to applications regardless of time, and it is highly accessible to rent them from their location and reach their destination. Based on these findings, this study suggests that careful access to rental and return could have a more positive effect on users and pedestrians by installing a cradle in a place where there is more use than disorderly device placement and expansion.