• Journal of Internet Computing and Services
• /
• v.13 no.2
• /
• pp.127-136
• /
• 2012

IT industry is rapidly changing technologies and trends are leading the field. Website also typical of these areas in the field of IT as a sector, technological advances faster, depending on the nature of the IT industry and the emergence of new services, changes in a variety of platforms, and is rapidly rising. In addition, a website containing information in accordance with the social situation changes and exposure of the agenda and vary greatly. Therefore, these changes in terms of B2C websites that can make a difference in the reliability factor looks. From this perspective, in this study to compare data before and after 10 years on the reliability factor by conducting longitudinal studies, most are not addressed in previous studies due to time differences website users to change the reliability of the analyzed factors.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.81.1-81.1
• /
• 2010

SOFC 발전시스템의 상용화를 위해 선행되어야 할 것은 스택의 안정적 출력 및 신뢰성 확보이다. 이를 이루기 위해서는 스택을 구성하는 구성요소의 신뢰성 있는 규격 및 검수가 필요하다. 즉, 셀, 밀봉재, 분리판 및 집전체로 대변되는 구성요소들이 스택에 장착되었을 때 그 기능을 최대한 발휘하면서도 점진적 또는 급격한 품질저하가 발생되지 말아야 한다. 특히, 셀의 경우 스택의 성능에 직접적인 영향을 미치는 구성요소로서 품질에 대한 명확한 검수기준이 필요하다. SOFC용 셀은 다공성 anode, 치밀한 전해질, 그리고 다공성 cathode로 구성된 세라믹 소결체이다. 이 때 치밀한 전해질에 결함이 내재되어 있거나 물리적 힘에 의해 신규로 발생할 경우, 연료로 사용되는 수소와 공기가 만나는 cross-over가 발생하게 된다. Cross-over는 연료가 소모되는 문제도 있지만 발열로 인한 Hot spot을 형성시켜서 주변과의 온도구배를 유발하고, 이로 인해 고체 전해질의 균열전파를 일으킬 수 있고 나아가 급격한 셀의 파괴를 야기할 수 있다. 본 연구에서는 SOFC에 사용되는 셀의 형상측정, 물리적 강도 및 결함 검출을 위한 검수기법을 개발하여 스택의 신뢰성 향상과 향후 규격표준화를 위한 기반을 제공하고자, 평판형 셀의 3차원 형상을 정밀하게 측정하는 장치와 일정 면압을 인가하여 특정 형상을 갖고 있는 셀의 물리적 파괴여부를 판단할 수 있는 장치, 그리고 셀의 전해질에 내재된 결함을 검출할 수 있는 장치를 제작하였다. 본 장치들은 $1,000cm^2$급 평판형 셀까지 검수할 수 있도록 고안하여 양산시스템에 접목시킬 수 있도록 고안된 것이다. 본 장치들을 이용한 검수결과, 현재 $700cm^2$급 평판형 셀의 경우 최대 camber가 4mm 이하, 전해질의 He leak rate는 $5{\times}10^{-5}mbar.l/s.cm^2$ 이하라는 검수규격을 본 연구소에서 운전하는 스택에 1차적으로 적용하였으며 현재 검수규격의 신뢰성 및 강화를 위한 연구를 수행 중에 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.701-708
• /
• 2009

The flight control law of developed flight control computer(DFLCC) is developed based on operation flight program of advanced trainer aircraft full scale development final configuration. The flight control law design is used common use development tool in GUI(Graphic User Interface) environment. The flight control law transformed to C-Code is reflected in OFP. The OFP is verified by the standardized verification process. But, before standardized verification process, we need preliminary verification process such as similarity of flight control law and reliability of developed HILS. Similarity of flight control law is verified by comparing the aircraft response of advanced trainer aircraft and those of the developed control law. Also, reliability of developed HILS is verified by comparing the aircraft response of HILS and Non-real time simulation result. This paper verifies similarity of developed control law and reliability of HILS environment as comparing aircraft response.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.7
• /
• pp.288-295
• /
• 2007

The illegal copying and redistribution of digitally-stored information is a crucial problem to distributors who electronically sell digital data. fingerprinting scheme is a technique which supports copyright protection to track redistributors of electronic information using cryptographic techniques. Anonymous asymmetric fingerprinting scheme prevents the merchant from framing a buyer by making the fingerprinted version known to the buyer only. And this scheme allows the buyer to purchase goods without revealing her identity to the seller. In this paper, a new anonymous asymmetric fingerprinting scheme with TTP is introduced. The buyer's fingerprint is generated by the Fingerprint Certificate Authority which is a TTP. When the seller embeds the fingerprint in the digital data, the protocol uses the homomorphic encryption scheme. Thus the seller cannot know the buyer's fingerprint and the buyer's anonymity is guaranteed by using anonymous key pair.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1220-1227
• /
• 2018

Avionics electronic equipment refers to the electronic equipment installed on an aircraft. Failure of avionics equipment can have a significant impact on aircraft operations as well as threaten the safety of pilots and passengers. Therefore, avionics electronic equipment is required to have higher reliability and safety than electronic equipment used for other purposes. Avionics equipment must consider various component selection and system design to meet reliability and safety-related requirements from the initial design stage. In this paper, we describe safety, reliability performance analysis method of avionics equipment, and introduce various design improvement methods that can be performed to meet safety requirement performance. Finally, the safety performance of the improved avionics equipment was reanalyzed and compared with the value before the improvement, the validity of the proposed design change was verified.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.158-166
• /
• 2008

Member force, strain and stress distribution of a section are obtained for prestressed steel and concrete(PSSC) composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for deflection, stress and flexural strength. Comparing that the reliability index for stress is near 0 for example section which is designed to satisfy the allowable stress exactly, the reliability indexes for deflection and flexural strength are high. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for deflection and flexural strength.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.71-72
• /
• 1998

반도체 집적 공정의 발달로 차세대 소자용으로 30 A 이하의 극 박막 Si02 절연막이 요구되고 있으며, 현재 제품으로 50-70 A 두께의 절연막을 사용한 것이 발표되고 있다. 절연막의 두께가 앓아질수록 많은 문제가 발생할 수 있는데 그 예로 절연막의 breakdo때둥에 의한 신뢰성 특성의 악화, 절연막올 통한 direct tunneling leakage current, boron풍의 dopant 침투로 인한 소자 특성 ( (Threshold Voltage)의 불안, 전기적 stress하에서의 leakage current증가와 c charge-trap 및 피terface s쩌.te의 생성으로 인한 소자 특성의 변화 둥으로 요약 된다. 절연막의 특성올 개선하기 위해 여러 가지 새로운 공정들이 제안되었다. 그 예로, Nitrogen올 Si/Si02 계면에 doping하여 절연막의 특성을 개선하는 방법 으로 고온 열처 리 를 NH3, N20, NO 분위 기 에서 실시 하거 나, polysilicon 또는 s silicon 기판에 nitrogen올 이온 주입하여 열처리 하는 방법, 그리고 Plasma분 위기에서 Nitrogen 함유 Gas를 이용하여 nitrogen을 doping시키는 방법 둥이 연구되고 있다. 또한 Oxide cleaning 후 상온에서 성장되는 oxide를 최소화 하여 절연막의 특성올 개선하기 위하여 LOAD-LOCK을 이용하는 방법, C뼈피ng 공정의 개선올 통한 contamination 감소와 silicon surface roughness 감소 로 oxide 신뢰성올 개선하는 방법 둥이 있다. 구조적 인 측면 에 서 는 Polysilicon 의 g없n size 를 최 적 화하여 OxideIPolysilicon 의 계면 특성올 개선하는 연구와 Isolation및 Gate ETCH공정이 절연막의 특성에 미 치 는 영 향도 많이 연구되 고 있다 .. Plasma damage 가 Oxide 에 미 치 는 효과 를 제어하는 방법과 Deuterium열처리 퉁올 이용하여 Hot electron Stress하에서 의 MOS 소자의 Si/Si02 계면의 신뢰성을 개선하고 있다. 또한 극 박막 전연막의 신뢰성 특성올 통계적 분석올 통하여 사용 가능한 수명 올 예 측 하는 방법 과 Direct Tunneling Leakage current 를 고려 한 허 용 가농 한 동작 전 압 예측 및 Stress Induced Leakage Current 둥에 관해서 도 최 근 활발 한 연구가 진행되고 있다.

• Journal of the Korea Convergence Society
• /
• v.8 no.4
• /
• pp.167-182
• /
• 2017

This study aims to examine the impacts of service quality (SQ) on consumer-brand relationship quality (BRQ), the mediation effects of brand trust (BT) in those relationships and the moderated mediation effects of BT by the level of perceived product quality (PQ). A 376 valid sample was obtained from the consumers who have visited the service centers of automotive brands. The findings demonstrate the direct effects of SQ of the service centers in automotive brands on BRQ are not significant, while the mediation effects of BT between SQ and BRQ are significant. Moreover, the findings reveal that the mediation effects of BT in the lower perception group of PQ are stronger than those in the higher group. Based on these findings, not only the necessary roles of a service center to improve BRQ but also the transferring process from service centers' SQ to building a strong brand are discussed.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.6
• /
• pp.1113-1121
• /
• 2011

Recently, a variety of data mining techniques has been applied in various fields like healthcare, insurance, and internet shopping mall. Association rule mining is a popular and well researched method for discovering interesting relations among large set of data items. Association rule mining is the method to quantify the relationship between each set of items in very huge database based on the association thresholds. There are three primary quality measures for association rules; support and confidence and lift. In this paper we consider some similarity measures with negative co-occurrence frequencies which is widely used in cluster analysis or multi-dimensional analysis as association thresholds. The comparative studies with support, confidence and some similarity measures are shown by numerical example.

• Journal of Information Technology and Architecture
• /
• v.11 no.2
• /
• pp.201-216
• /
• 2014

The internet and the information-oriented communities have brought many changes to increase brand power and product sales in many industries. This study investigates the influence of brand preference and information reliability on consumers' purchase decisions. If product information at the internet advertising matches with consumers' previous brand preference, they are more likely to enhance product information reliability after watching the advertising. Such brand preference match through the advertising will increase consumers' intention to purchase. From the results of our experiment, we found that information reliability and memory from the advertising give a positive impact on the intention to purchase when consumers' previous brand preference matches with advertising attributes. Our study suggests that firms need to develop the internet advertising which is closely matched with consumers' preferences.