• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2017

The packaged optical fiber Bragg grating sensors which were networked by multiplexing the Bragg grating sensors with WDM technology were investigated in application for the structural health monitoring of the marine trestle structure transporting the ship. The optical fiber Bragg grating sensor was packaged in a cylindrical shape made of aluminum tubes. Furthermore, after the packaged optical fiber sensor was inserted in polymeric tube, the epoxy was filled inside the tube so that the sensor has resistance and durability against sea water. The packaged optical fiber sensor component was investigated under 0.2 MPa of hydraulic pressure and was found to be robust. The number and location of Bragg gratings attached at the trestle were determined where the trestle was subject to high displacement obtained by the finite element simulation. Strain of the part in the trestle being subjected to the maximum load was analyzed to be ${\sim}1000{\mu}{\varepsilon}$ and thus shift in Bragg wavelength of the sensor caused by the maximum load of the trestle was found to be ~1,200 pm. According to results of the finite element analysis, the Bragg wavelength spacings of the sensors were determined to have 3~5 nm without overlapping of grating wavelengths between sensors when the trestle was under loads and thus 50 of the grating sensors with each module consisting of 5 sensors could be networked within 150 nm optical window at 1550 nm wavelength of the Bragg wavelength interrogator. Shifts in Bragg wavelength of the 5 packaged optical fiber sensors attached at the mock trestle unit were well interrogated by the grating interrogator which used the optical fiber loop mirror, and the maximum strain rate was measured to be about $235.650{\mu}{\varepsilon}$. The modelling result of the sensor packaging and networking was in good agreements with experimental result each other.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.152-160
• /
• 2009

Purpose : To intra-individually compare diagnostic accuracy of high-resolution contrast-enhanced magnetic resonance angiography (CE-MRA) with computed tomography angiography (CTA) and digital subtraction angiography (DSA) for the assessment of supraaortic steno-occlusive disease. Materials and Methods : Twenty-eight patients (20 men, 8 women, 53-79 years of age) underwent supraaortic CE-MRA, CTA and DSA. CE-MRA was performed on two 1.5T MR scanners (voxel dimension: $0.66{\times}0.66{\times}1.1$ or $1.2\;mm^3$), and CTA on 64-slice CT scanners (voxel dimension: $0.42{\times}0.42{\times}0.63\;mm^3$). All the three examinations were completed within 40 days (median 19 days; range 1-40 days). Retrospective evaluation and measurement of diameter of 6 extracranial and 9 intracranial arterial segments was done by 2 experienced radiologists. Results: A total of 420 arterial segments were examined by CE-MRA, CTA and DSA. On DSA, 34 stenoocclusive lesions were noted at extracranial (n= 19) and intracranial (n = 15) vessels. For extracranial stenosis greater than 70%, sensitivity, specificity, positive predictive value (PPV) and negative predictive values (NPV) were 94.7%, 98.7%, 90.0% and 99.3% on CE-MRA, and 94.7%, 99.3%, 94.7% and 99.3% on CTA. For intracranial stenosis greater than 50%, sensitivity; specificity, PPV and NPV were 93.3%, 98.3%, 77.8%and 99.6% on CE-MRA, and 86.7%, 97.9%, 72.2% and 99.1 % on CTA, with DSA as the standard of reference. Conclusion : Supraaortic CE-MRA is as reliable as CTA in depicting the arterial stenosis, and is effective in screening of significant stenosis of both extracranial and intracranial arterial stenosis.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.95-104
• /
• 2005

The purpose of this study is to estimate the determinants of product design and analyze the impacts of product design on quality competitiveness, product reliability, and consumer satisfaction in an attempt to provide a foundation for the theory of design management. For this empirical analysis, this study has derived the relevant measurement variables from a survey on 400 Korean manufacturing firms during the period of $August{\sim}October$ 2003. The empirical findings are summarized as follows: First, the determinants of product design are very significantly (at p<0.001) estimated to be the R&D capability, the level of R&D expenditure, the level of innovative activities(5S, TQM, 6Sigma, QC, etc.). This empirical result can support Pawar and Driva(1999)'s two principles by which the performance of product design and product development can be simultaneously evaluated in the context of CE(concurrent engineering) of NPD(newly product development) activities. Second, the hypothesis on the causality: product design${\rightarrow}$quality competitiveness${\rightarrow}$customer satisfaction${\rightarrow}$customer loyalty is very significantly (at p<0.001) accepted. This implies that product design positively affects consumer satisfaction, not directly but indirectly, by influencing quality competitiveness. This empirical result of this study can also support the studies of for example Flynn et al.(1994), Ahire et at.(1996), Afire and Dreyfus(2000) which conclude that design management is a significant determinant of product quality. The aforementioned empirical results are important in the following sense: the empirical result that quality competitiveness plays a bridging role between product design and consumer satisfaction can reconcile the traditional debate between QFD(quality function development) approach asserted by product developers and conjoint analysis maintained by marketers. The first empirical result is related to QFD approach whereas the second empirical result is related to conjoint analysis. At the same time, the empirical results of this study can support the rationale of design integration(DI) of Ettlie(1997), i.e., the coordination of the timing and substance of product development activities performed by the various disciplines and organizational functions of a product's life cycle. Finally, the policy implication (at the corporate level) from the empirical results is that successful design management(DM) requires not only the support of top management but also the removal of communication barriers, (i.e. the adoption of cross-functional teams) so that concurrent engineering(CE), the simultaneous development of product and process designs can assure product development speed, design quality, and market success.

• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.1
• /
• pp.77-88
• /
• 2003

Objectives: The purpose of this study was to compare reliability and validity of three Korean versions of the 20-item Toronto Alexithymia scale and to confirm the most reliable and validated Korean translation of the 20-item Toronto Alexithymia Scale for both clinical and research purpose in Korea. The first one was a Korean version of the 20-Item Toronto Alexithymia Scale developed by Lee YH et al in 1996 which was designated as TAS-20K(1996) in this study. This scale had a problem with one item due to the cultural difference regarding the word 'analyzing' between western culture and Korean culture. The second one was the revised version of TAS-20K(1996) on that point by Lee YH et al in 1996 without validation which was designated as TAS-20K(2003) in this study. The third one was a 23-item Korean version developed by Sin HG and Won HT in 1997, which was somewhat different from the 20-item Toronto Alexithymia Scale(TAS-20) in the number of total item, the content of some items and the scoring method. This scale was designated as S-TAS here. Methods: 408 medical students were tested with one scale composed of all the different items randomly arranged from the three versions. We evaluated goodness-of-fit and Cronbach $\alpha$ coefficients of three scales for reliability. We used confirmatory factor analysis to compare validity. Results: TAS-20K(2003) showed that it had better internal consistency than TAS-20K(1996), which implied that the cultural difference should be considered in the Korean translation. Both TAS-20K(2003) and S-TAS replicated three-factor structures and had adequacy of fit, good internal consistency and acceptable validity. However, S-TAS had one item with poor item-factor correlation and didn't show high correlation between item 2 and factor 1 as before in 1997. Conclusion: Although S-TAS had added 3 items and changed the content of two items, it didn't show better reliability and validity than TAS-20K(2003). Therefore it is proposed to use TAS-20K (2003) as the Korean version of the 20-item Toronto Alexithymia Scale(TAS-20K) for international communication of results of Alexithymia research. It has good internal consistency and validity and maintains original items, the same construct and scoring method as the 20-item Toronto Alexithymia Scale.

• The Journal of the Korean life insurance medical association
• /
• v.22
• /
• pp.139-169
• /
• 2003

국내 보험 산업은 경제발전에 따라 많은 성장을 이루어왔으나 단체보험은 보험 회사의 외부적 또는 내부적 환경으로 인해 활성화가 미흡한 상황이다. 개인보험시장의 포화, 해외시장에서 단체보험의 지속적인 성장, 사회보험 민영화 논의, 방카슈랑스와 보험시장의 개방 등 급격한 변화를 겪고 있는 보험영업환경을 고려한다면 향후 확대될 기업복지시장에서의 성공적 역할수행을 위해서는 단체보험 영업과 지원시스템의 보완이 시급한 과제라고 할 수 있다. 특히 언더라이팅 기법은 단체보험의 핵심역량이며 회사의 경쟁력 강화와 사차익 안정화를 위해서는 단체보험 인수기법의 선진화가 필수요건이다. 단체보험은 대수의 법칙, 수지상등의 원칙 등 보험의 기본원리라는 측면에서는 개인보험과 다른 점이 없지만 하나의 계약을 통해 집단의 피보험자에게 보장을 제공하기 때문에 가지게 되는 역선택 축소, 비용절감, 기업에 의한 1차선택 등 몇 가지 특성들은 인수기법에서의 차이를 필요로 한다. 하지만 국내의 단체보험 언더라이팅은 기본개념조차 제대로 정립되어 있지 못한 초기단계로 단체보험의 특성을 제대로 반영할 수 있는 위험평가를 위해서는 선진기법의 도입이 절실하다. 첫째, 자유보장한도(FREE COVER LIMIT)의 도입이다. 자유보장한도는 단체에 대한 위험과 피보험자 개인의 위험을 구분하는 기준으로 자유보장한도내의 피보험자에 대해서는 고지나 의적 검사를 요구하지 않고 개인별 언더라이팅을 하지 않으며 거절체나 표준하체이더라도 자유보장한도 금액까지는 나머지 정상 피보험자들과 동일한 보장을 제공하는 것을 말한다. 이는 피보험자별 위험을 중심으로 심사하고 있는 현재의 국내 단체보험 인수방법에서 발생되는 고객측 불만과 심사의 비효율성을 개선할 수 있는 방안이다. 둘째, 단체별 특성에 따른 보험요율 차등화이다 단체는 산업의 종류, 피보험자의 직무, 지역적 위치, 크기(피보험자수), 성별구성비 등 여러 가지 특성들을 가지고 있으며 이런 특성들은 보장급부에 따라 발생위험에 영향을 미칠 수 있다. 하지만 현재 나이와 성별에 따라서 피보험자별로 정해지는 요율체계만으로는 이런 위험들을 적절하게 반영하지 못하고 단체별 형평성에도 문제가 생긴다. 따라서 정확한 data 구축을 통해 단체 특성별로 어떤 보장에 어느 정도로 위험 발생에 영향을 미치는지를 분석하여 보험요율을 차등부과 할 수 있는 체계를 갖추어야 한다. 셋째, 경험을 활용한 보험료 산정기법이다. 이것은 개인보험과 구분되는 가장 큰 단체보험만의 특성이라 할 수 있는데 해당 단체의 과거 경험 data 즉 청구로 인한 지급금액을 토대로 당해 계약 보험료를 결정하는 방법이다. 이를 위해서는 과거 경험 data가 얼마나 신뢰할 수 있는 지의 정도(신뢰도)를 측정하는 것이 필요하다. 과학적이고 효율적인 단체보험 인수를 위해서 경험율의 활용은 반드시 이루어져야 할 선결과제이다. 넷째, 관련규정의 정비가 필요하다 단체보험의 특성을 갖기 위해서는 가입가능한 피보험자들의 자격규정(eligibility), 활동적근무 조건(actively at work)이 요구되어야 하며 참여비율(가입비율)과 보장수준의 구성방법에 대해서도 가이드라인 설정을 통해 역선택을 최소화 할 수 있는 제도적 보완이 마련되어야 한다. 이런 선진인수기법의 도입과 함께 단체보험 언더라이터의 필요역량을 개발하고 향상시키는 노력도 병행되어야만 종합금융화, 대형화가 진전되면서 대경쟁의 구도로 바뀌고 있는 국내 보험시장에서의 경쟁력 확보가 가능할 것이다.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.89-110
• /
• 1998

Variations of backfill load on the metal-polyethylene composite( MPC ) pipes buried in various trenches backfill afterward were investigated in this paper. The backfill loads obtained by the finite element method( FBM ) were compared with those calculated by the well-known MarstonBpangler(M-5) theory. The reliability of the finite element analysis used in this study was examined by an inaitu best for the buried pipe. The backfill lords and deflections on the real-size pipe buried on-site were measured while increasing the backfill height. In addition, further investigations were made for the variations of the backfill loads as a function of several important parameters such as the backfill soil type, bach. height$(\leq4.0m)$, diameter of the pipe$(B.$1.0m)$, and trench width($\leq 3.0 B_c$). It is confirmed that the M-S theory predicts reasonably well the backfill loafs of the MPC of the M-S backfill coils be 0.13 and 0.15 for the SC and SM coils in the D unman soil model, respectively. The load ratio, Wu-s/WwgM for a narrow trench varies negligibly with the back(111 height but fiends to increase for a wide trench. The ratio increases with increasing diameter of the pipe for a narrow trench while decreasing for a wide trench. It is also found that the ratio generally decreases as the degree of compaction increases and BM soil exhibits larger load ratio than that of SC soil.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.135-147
• /
• 2015

Recent underground common utility tunnels are underground facilities for jointly accommodating more than 2 kinds of air-conditioning and heating facilities, vacuum dust collector, information processing cables as well as electricity, telecommunications, waterworks, city gas, sewerage system required when citizens live their daily lives and facilities responsible for the central function of the country but it is difficult to cope with fire accidents quickly and hard to enter into common utility tunnels to extinguish a fire due to toxic gases and smoke generated when various cables are burnt. Thus, in the event of a fire, not only the nerve center of the country is paralyzed such as significant property damage and loss of communication etc. but citizen inconveniences are caused. Therefore, noticing that most fires break out by a short circuit due to electrical works and degradation contact due to combustible cables as the main causes of fires in domestic and foreign common utility tunnels fire cases that have occurred so far, the purpose of this paper is to scientifically analyze the behavior of a fire by producing the model of actual common utility tunnels and reproducing the fire. A fire experiment was conducted in a state that line type fixed temperature detector, fire door, connection deluge set and ventilation equipment are installed in underground common utility tunnels and transmission power distribution cables are coated with fire proof paints in a certain section and heating pipes are fire proof covered. As a result, in the case of Type II, the maximum temperature was measured as $932^{\circ}C$ and line type fixed temperature detector displayed the fire location exactly in the receiver at a constant temperature. And transmission power distribution cables painted with fire proof paints in a certain section, the case of Type III, were found not to be fire resistant and fire proof covered heating pipes to be fire resistant for about 30 minutes. Also, fire simulation was carried out by entering fire load during a real fire test and as a result, the maximum temperature is $943^{\circ}C$, almost identical with $932^{\circ}C$ during a real fire test. Therefore, it is considered that fire behaviour can be predicted by conducting fire simulation only with common utility tunnels fire load and result values of heat release rate, height of the smoke layer, concentration of O2, CO, CO2 etc. obtained by simulation are determined to be applied as the values during a real fire experiment. In the future, it is expected that more reliable information on domestic underground common utility tunnels fire accidents can be provided and it will contribute to construction and maintenance repair effectively and systematically by analyzing and accumulating experimental data on domestic underground common utility tunnels fire accidents built in this study and fire cases continuously every year and complementing laws and regulations and administration manuals etc.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.318-330
• /
• 2009

A high heat flux test facility using a graphite heating panel was constructed and is presently in operation at Korea Atomic Energy Research Institute, which is called KoHLT-1. Its major purpose is to carry out a thermal cycle test to verify the integrity of a HIP (hot isostatic pressing) bonded Be mockups which were fabricated for developing HIP joining technology to bond different metals, i.e., Be-to-CuCrZr and CuCrZr-to-SS316L, for the ITER (International Thermonuclear Experimental Reactor) first wall. The KoHLT-1 consists of a graphite heating panel, a box-type test chamber with water-cooling jackets, an electrical DC power supply, a water-cooling system, an evacuation system, an He gas system, and some diagnostics, which are equipped in an authorized laboratory with a special ventilation system for the Be treatment. The graphite heater is placed between two mockups, and the gap distance between the heater and the mockup is adjusted to $2{\sim}3\;mm$. We designed and fabricated several graphite heating panels to have various heating areas depending on the tested mockups, and to have the electrical resistances of $0.2{\sim}0.5$ ohms during high temperature operation. The heater is connected to an electrical DC power supply of 100 V/400 A. The heat flux is easily controlled by the pre-programmed control system which consists of a personal computer and a multi function module. The heat fluxes on the two mockups are deduced from the flow rate and the coolant inlet/out temperatures by a calorimetric method. We have carried out the thermal cycle tests of various Be mockups, and the reliability of the KoHLT-1 for long time operation at a high heat flux was verified, and its broad applicability is promising.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.223-234
• /
• 2008

Recently the web service area provides the efficient integrated environment of the internal and external of corporation and enterprise that wants the introduction of it is increasing. Also the web service develops and the new business model appears, the domestic enterprise environment and e-business environment are changing caused by web service. The web service which provides the similar function increases, most the method which searches the suitable service in demand of the user is more considered seriously. When it needs to choose one among the similar web services, service consumer generally needs quality information of web service. The problem, however, is that the advertised QoS information of a web service is not always trustworthy. A service provider may publish inaccurate QoS information to attract more customers, or the published QoS information may be out of date. Allowing current customers to rate the QoS they receive from a web service, and making these ratings public, can provide new customers with valuable information on how to rank services. This paper suggests the agent-based quality broker architecture which helps to find a service providing the optimum quality that the consumer needs in a position of service consumer. It is able to solve problem which modify quality requirements of the consumer from providing the architecture it selects a web service to consumer dynamically. Namely, the consumer is able to search the service which provides the optimal quality criteria through UDDI browser which is connected in quality broker server. To quality criteria value decision of each service the user intervention is excluded the maximum. In the existing selection architecture, the objective evaluation was difficult in subjective class of service selecting of the consumer. But the proposal architecture is able to secure an objectivity with the quality criteria value decision where the agent monitors binding information in consumer location. Namely, it solves QoS information of service which provider does not provide with QoS information sharing which is caused by with feedback of consumer side agents.