• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.473-479
• /
• 1998

Identification of rice species was attempted by three side (top, side and front) images of brown rice. Nine parameters of each image were area, aspect ratio, maximum diameter, minimum diameter, perimeter, roundness and red (R), green (G) and blue (B) pixel values of an image. Forty rice samples consisted of 19 species used for the study and total 27 image characteristics for a kernel were measured. For calibration and confirmation, 105 and 20 brown rice kernels per each sample were used respectively. For best identification of rice species, 24 image characteristics were selected for discriminant analysis. Average percentages for correct identification of rice species were 84.75% and 84.93% for calibration and confirmation data set, respectively. The highest and lowest percentage for correct identification were 99.05% for Nongan and 50.63% for Hwaseung respectively in calibration data. The confirmation data showed that the correct identification of Nongan or Paalgong was 100%, while that of Hwaseung was 47.62%. The result of the study showed that three side (top, side and front) image of brown rice was not suitable for identification of rice species suggesting that additional techniques are required for better discrimination of rice species.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.13-21
• /
• 2016

Insolvency of construction companies that play the role of main contractors can lead to clients' losses due to non-fulfillment of construction contracts, and it can have negative effects on the financial soundness of construction companies and suppliers. The construction industry has the cash flow financial characteristic of receiving a project and getting payment based on the progress of the construction. As such, insolvency during project progress can lead to financial losses, which is why the prediction of construction companies is so important. The prediction of insolvency of Korean construction companies are often made through the KMV model from the KMV (Kealhofer McQuown and Vasicek) Company developed in the U.S. during the early 90s, but this model is insufficient in predicting construction companies because it was developed based on credit risk assessment of general companies and banks. In addition, the predictive performance of KMV value's insolvency probability is continuously being questioned due to lack of number of analyzed companies and data. Therefore, in order to resolve such issues, the Bayesian Probabilistic Approach is to be combined with the existing insolvency predictive probability model. This is because if the Prior Probability of Bayesian statistics can be appropriately predicted, reliable Posterior Probability can be predicted through ensured conditionality on the evidence despite the lack of data. Thus, this study is to measure the Expected Default Frequency (EDF) by utilizing the Bayesian Probabilistic Approach with the existing insolvency predictive probability model and predict the accuracy by comparing the result with the EDF of the existing model.

• Journal of Korea Port Economic Association
• /
• v.26 no.4
• /
• pp.122-146
• /
• 2010

This purpose of this study is to analyze the causal relation among constituent concepts and verify the relation among internal marketing, service quality and customer satisfaction in shipping companies. To achieve the goal of this study, the author studied literatures on internal marketing, service quality and customer satisfaction, and carried out a survey targeting people working for shipping companies and international logistics freight forwarders to make an empirical analysis. The results are as follows. It was confirmed that education and training, reward system, empowerment among internal marketing elements of a shipping company have a positive effect on the service quality and customer satisfaction of the shipping company, and the service quality of a shipping company also has a positive effect on customer satisfaction. As it can be known from these results, it would be necessary to concentrate on internal marketing of a shipping company in order to increase service quality and customer satisfaction.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.163-169
• /
• 2019

Sn-Pb solder alloys in electronics rapidly has been replaced to Pb free solder alloys because of various environmental regulations such as restriction of hazardous substances directive (RoHS), European Union waste electrical, waste electrical and electronic equipment (WEEE), registration evaluation authorization and of chemicals (REACH) etc. Because Sn58%Bi (in wt.%) solder alloy has low melting point and higher mechanical properties than that of Sn-Pb solder, it has been studied to manufacture electronic components. However, the reliability of Sn58%Bi solder could be lowered because of the brittleness of Bi element included in the solder alloy. Therefore, we observed the microstructures of Sn58%Bi composite solders with various contents of Sn-decorated multiwalled carbon nanotube (Sn-MWCNT) particles and evaluated bonding strength of the FR-4 components assembled with Sn58%Bi composite solder. Also, microstructures and bonding strengths of the Sn58%Bi composite solder joints were evaluated with the number of reflows from 1 to 7 times, respectively. Bonding strengths and fracture energies of the Sn58%Bi composite solder joints were measured by die shear test. Microstructures and fracture modes were observed with scanning electron microscope (SEM). Microstructures in the Sn58%Bi composite solder joints were finer than that of only Sn58%Bi solder joint. Bonding strength and fracture energy of Sn58%Bi composite solder including 0.1 wt.% of Sn-decorated MWCNT particles increased up to 20.4% and 15.4% at 5 times in reflow, respectively.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.20-31
• /
• 2007

Material characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, the NBR compound was prepared by sulfur-cure system, and was used in predicting the lifetime of rubber gasket made by the compound. The accelerated material aging was investigated at different temperatures at 120, 140 and $160^{\circ}C$ and aging time from 3 hours to 600 hours at 5, 6, 7 vol %. of $H_2SO_4$ concentrations The rubber strips were placed in acid solution using pyrex g1ass tube. Both ends of pyrex g1ass tube were sealed to avoid evaporation of solution during heating at given time. The material test and accelerated acid-heat aging test were carried out to predict the useful life of NBR rubber gasket for a fuel cell stack. In order to investigate the effects of acid-heat aging on the properties of the NBR, tensile strength, elongation at break, hardness and crosslink-density were measured. The tensile strength decreases as the $H_2SO_4$ concentrations and temperature increase. Results were evaluated using Arrhenius equation.

• Food Science and Preservation
• /
• v.13 no.1
• /
• pp.50-54
• /
• 2006

The identification characteristics of inadiated dried onion and garlic at 1, 4 and 7 kGy were investigated by analyzing their photostimulated luminescence (PSL), thermoluminescence (TL) and electron spin resonance (ESR). The PSL results showed that the photon counts of non-irradiated dried onion were less than 700 (negative) and those of irradiated samples at 1kGy or more were over 5000 (positive), making it possible to discriminate non-irradiated onions from irradiated ones. However, the intermediate counts (700-5000) were observed in irradiated garlic at 1 and 4 kGy, even though positive counts were measured in 7 kGy group. Radiation-induced TL glow curves $(TL_1)$ were measured at $150^{\circ}C$ range in both irradiated onion and garlic samples at 1 kGy or more, which could identify irradiated groups. Furthermore, determination of TL ratios $(TL_1/TL_2)$ for both samples could verify the above results. It was found, however, that ESR spectroscopy was not suitable for the detection of irradiated dried onion and garlic.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.802-810
• /
• 2006

For a thorough train control, the precise train position detection is necessarily required. The widely used current way for train position detection is the one of using track circuits. The track circuit has a simple structure, and has a high level of reliability. However trains can be detected only on track circuits, which have to be installed on all ground sections, and much amount of cost for its installation and maintenance is needed. In addition, for the track circuit, only discontinuous position detection is possible because of the features of the closed circuit loop configuration. As the recent advances in telecommunication technologies and high-tech vehicle-based control equipments, for the train position detection, the method to detect positions directly from on trains is being studied. Vehicle-based position detection method is to estimate train positions, speed, timing data continuously, and to use them as the control information. In this paper, the features of GPS navigation and DR navigation are analyzed, and the navigation filters are designed by constructing vehicle-based train position detection method by combining GPS navigation and DR navigation for their complementary cooperation, and by using kalman filter. The position estimation performance of the proposed method is also confirmed by simulations.

• Journal of Korean Home Economics Education Association
• /
• v.25 no.2
• /
• pp.147-167
• /
• 2013

This study aimed to analyze the relative effects of parents' child-rearing attitudes and the quality of peer and teacher relationships on poor adolescents' self-resilience and self-esteem. The subjects were 639 1st grade middle school students from the firstly poor, the secondary poor, and the thirdly poor families who participated in the Korea Child Youth Panel Surveys(KCYPS). The data were analyzed with descriptive statistics and hierarchical regressions. The results of this study were as follows. Firstly, the poor adolescents' self-resilience were influenced by the quality of peer relationships, parents' child-rearing attitudes, and the quality of teacher relationships in order and the specific variables enhancing adolescents' self-resilience were communication between adolescents and peers, trust with peers, parents' love, reasonable explanation, supervision, and teacher-adolescents' friendly relationships. Secondly, the poor adolescents' self-esteem were influenced by parents' child-rearing attitudes, the quality of peer relationships, and the quality of teacher relationships in order and the specific variables enhancing adolescents' self-esteem were parents' love, supervision, inconsistency, senses of non-alienation among peers, communication between adolescents and peers, trust with peers, and teacher-adolescents' friendly relationships. Finally, the future directions of education welfare programs targeting poor adolescents were suggested on the basis of the results.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.31-40
• /
• 2015

The public housing needs maintenance administration for improvement and retainment of residential condition by means of tenants participation. However, most researchers have considered tenants as passive participants in this context. The previous studies did not comprehend perspective of tenants participation and just measured the management preference and the level of satisfaction on maintenance. This study investigates the attitudes and perceptions of tenants on participation in public housing maintenance by introduced Q method that provides a systematic and rigorous quantitative means for examining human subjectivity. The subjectivity is classified as types according to cost and benefit factors by principal components analysis and varimax rotation of the extracted factors. As a result, this study present 5 types of tenants participation and expect to discuss desirable roles of tenant and org anization in public housing maintenance.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.242-248
• /
• 2007

For an optimal design of automotive electric system, it is important to have a reliable modeling tool to predict the charge-discharge behaviors of the automotive battery. In this work, a two-dimensional modeling was carried out to predict the charge-discharge behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experimental data of the charge-discharge behaviors of a lead-acid battery. The discharge behaviors were measured with three different discharge rates of C/5, C/10, and C/20 at operating temperature of $25^{\circ}C$. The batteries were charged with constant current of 30A until the charging voltage reached to a predetermined value of 14.24 V and then the charging voltage was kept constant. The discharge and charge curves from the measurements and modeling were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, the porosity of the electrodes, and the current density within the electrodes as well as the acid concentration can be predicted as a function of charge and discharge time.