• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.17-22
• /
• 1999

In this paper, the results of the studies about a new proposal where the ONON(oxide-nitride-oxide-nitride) layer instead of the conventional ONO(oxide-nitride-oxide) layer is used as the IPD(inter-poly-dielectrics) layer to improve the data retention problem in the Flash EEPROM cell, have been discussed. For these studies, the stacked-gate Flash EEPROM cell with an about 10nm thick gate oxide and on ONO or ONON IPD layer have been fabricated. The measurement results have shown that the data retention characteristics of the devices with the ONO IPD layer are significantly degraded with an activation energy of 0.78 eV. which is much lower than the minimum value (1.0 eV) required for the Flash EEPROM cell. This is believed to be due to the partial or whole etching of the top oxide of the IPD layer during the cleaning process performed just prior to the dry oxidation process to grow the gate oxide of the peripheral MOSFET devices. Whereas the data retention characteristics of the devices with the ONON IPD layer have been found to be much (more than 50%) improved with an activation energy of 1.10 eV. This must be because the thin nitride layer on the top oxide layer in the ONON IPD layer protected the top oxide layer from being etched during the cleaning process.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.105-110
• /
• 2014

It is required to improve the efficiency and the reliability of the polymer solar cells (PSCs) as the energy saving optical device for the future application of the smart farm facilities. In this study, we fabricated the bulk hetero junction PSCs with organic passivation film layer for the reliability improvement of the devices. The effects of the passivation layer on the electrical properties of the PSCs were studied. The materials of passivation layer are composed of poly vinyl alcohol (PVA) and ammonium dichromate, and the passivation films were fabricated by the spin coating method on the P3HT:$PC_{61}BM$/LiF/Al substrate. The prepared structure of the device is the glass/ITO/PEDOT:PSS/P3HT:$PC_{61}BM$/LiF/Al/passivation layer. The performances of the PSCs with the organic passivation film showed better electrical properties compared with the PSCs without passivation layers. The power conversion efficiency (PCE) values of passivated PSCs decreased from 3.0 to 1.3% after air exposure for 140 hrs. In contrast, the PCE values for the devices without passivation decreased sharply from 3.5 to 0.1% under the same exposure condition.

• Management & Information Systems Review
• /
• v.28 no.1
• /
• pp.25-44
• /
• 2009

This study examines long term performance of initial public offerings(IPO) after book building was introduced in KOSDAQ market. We use event time portfolio approach and calendar time portfolio approach to test if the performance of IPO is fair or not in long term. We estimate the performance by using the BHAR(buy and hold abnormal return), CAR(cumulative abnormal return), WR(wealth relatives) model in event time portfolio approach. And we calculate the performance by using Fama-French three factor model, CTAR(calendar time abnormal return), RATS(Return Across Time and Securities approach) model in calendar time portfolio approach. This study shows that the long term performance of IPO is positive with statistical significance as the results of the analysis through the various research method and all windows in all kinds of firms and total firms.

• Progress in Medical Physics
• /
• v.9 no.1
• /
• pp.1-9
• /
• 1998

In order to provide complementary image data, CT(computed tomography), MR(magnetic resonance) and angiography have been used in the field of Stereotactic Radiosurgery(SRS) and neurosurgery. The aim of this work is to develop 3-D stereotactic localization system in order to determine the precise shape, size and location of the lesion in the brain in the field of Stereotactic Radiosurgery(SRS) and neurosurgery using multi-image modality and multi purpose QA phantom. In order to obtain accurate position of a target, Hitchcoke stereotactic frame and CT/angiography localizers were rigidly attached to the phantom with nine targets dispersed in 3-D space. The algorithms to obtain a 3-D stereotactic coordinates of the target have been developed using the images of the geometrical phantom which were taken by CT/angiography. Positions of targets computed by our algorithms were compared to the absolute position assigned in the phantom. Outlines of targets on each CT image were superimposed each other on angiography images. A spatial mean distance errors were 1.02${\pm}$0.17mm for CT with a 512${\times}$512 matrix and 2mm slice thickness, 0.41${\pm}$0.05mm for angiogra- phy localization. The resulting accuracy in the target localization suggests that the developed system has enough Qualification for Stereotactic Radiosurgery (SRS).

• Journal of Life Science
• /
• v.20 no.8
• /
• pp.1261-1267
• /
• 2010

The aim of this study was to investigate the combined effects of aerobic training and diacylglycerol ingestion on lipid profiles and resting metabolic rate changes in obese men. The subjects were divided into 3 groups: the Diacylglycerol group (D, n=6), aerobic training group (E, n=6), and diacylglycerol ingestion and aerobic training group (DE, n=6). Diacylglycerol was ingested and aerobic exercise training performed for 12 weeks. The information from the research was calculated through a Windows SPSS/PC+ Ver. 12.0K statistics package to standardize the means and deviations for each group. Then, two-way repeated measures ANOVA was used to evaluate the research hypothesis. Percent body fat, blood lipid profiles and resting metabolic rate changes were tested to evaluate the combined effect of aerobic exercise training and diacylglycerol ingestion. The results of this study were as follows; DG ingestion was shown to have a positive effect on body weight and body fat, while having a negative effect on resting metabolic rate changes. However, aerobic training was shown to have a positive effect on all factors including body weight, body fat, and resting metabolic rate. In conclusion, DG ingestion and exercise training were not shown to have synergistic effects on resting metabolic rate changes, percent body fat and lipid profiles, while aerobic exercise training was shown to have a positive effect on resting metabolic rate changes, percent body fat, and lipid profiles. To investigate the therapeutic effect of DG ingestion and aerobic exercise for obese men, analysis of catecholamine, cAMP, HSL, or insulin sensitivity should be considered.

• Korean Journal of Social Welfare
• /
• v.67 no.2
• /
• pp.61-84
• /
• 2015

The purpose of this study was to develop the Post-bereavement Growth Inventory(PBGI) for the elderly and to evaluate its validity. The items for developing PBGI were compiled from a literature search, content validity review, and a preliminary survey. A main survey of 308 widowed persons(aged 60+) was conducted. The results were as follows. First, an exploratory factor analysis revealed six factors of the PBGI. The results of the confirmatory factor analysis supported a five-factor structure for the final 24 scale items of scale. Second, in terms of concurrent validity, the PGBI compared favorably with the "Personal Growth" scale from The Hogan Grief Reaction Checklist (HGRC: Hogan and Schimdt, 2001). Third, the results of contrast group validity tests demonstrated that the group scoring in the upper 30% on the scales of Psychological Well-being (PWB, Ryff and Keyes, 1995) and the Grief Reaction Inventory (GRI: Remondet and Hansson, 1987) showed a significantly higher degree of post-bereavement growth (PBG) than the group scoring in the lower 30%. Fourth, Cronbach's ${\alpha}$ values for the five factors were between .649-.856 and .907 overall, indicating high internal consistency. Finally, education had the most significant influence on PBG. All results indicated the high validity of the PBGI. The findings from this study could provide the rationale for practical interventions from a growth-oriented perspective for widowed persons, as well as an objective assessment tool for practitioners in clinical areas.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.186-195
• /
• 2017

Recently, autonomous vehicles have been studied actively. There are various technologies such as ITS, Connected Car, V2X and ADAS in order to realize such autonomous driving. Among these technologies, it is particularly important to recognize where the vehicle is on the road in order to change the lane and drive to the destination. Generally, it is done through GPS and camera image processing. However, there are limitations on the reliability of the positioning due to shaded areas such as tunnels in the case of GPS, and there are limitations in recognition and positioning according to the state of the road lane and the surrounding environment when performing the camera image processing. In this paper, we propose that LED lights should be installed for autonomous vehicles in tunnels which are shaded area of the GPS. In this paper, we show that it is possible to measure the position of the current lane of the autonomous vehicle by analyzing the color temperature after constructing the tunnel LED lighting simulation environment which illuminates light of different color temperature by lane. Based on the above, this paper proposes a lane positioning technique using tunnel LED lights.

• Journal of the HCI Society of Korea
• /
• v.1 no.2
• /
• pp.35-42
• /
• 2006

The importance of interface agent as user interface increases in the ubiquitous computing environment. It is essential that an interface agent can develop social relationship with users. We propose that self-disclosure, a major factor to form and maintain human relationship, can be useful to achieve this goal. This study examined the effects of the degree of a computer agent's self-disclosure on the users' social responses. The experiment was conducted in a 2(intimacy of agent's disclosure: high vs. low) by 2(amount of agent's disclosure: high vs. low) between-group design. The results show that: 1) reciprocity of self-disclosure was found in both sub-dimensions (intimacy and amount) of self-disclosure; 2) in case that participants received highly intimate self-disclosure from the agent, social attraction, trustworthiness and expectation of mutual influence toward agent were lower than when the agent's disclosure was less intimate. These findings suggest that the intimacy of agent's self-disclosure can affect on gathering user information and human-agent relationship formation separately. While agent's highly intimate disclosure can be useful to gather user information, agent's appropriate disclosure can be useful to form positive user-agent relationship.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.402-410
• /
• 2017

The effect of the steel pipe member joint on the design performance of a plastic multi-span greenhouse was analysed through the comparing full-scale experiment and numerical analysis. The design performance of the greenhouse is generally evaluated through numerical analysis, but it is rare to consider the characteristics of the connections or joints of the members. In this study, the effect of the column-gutter beam-rafter-wind break wall joint on the design performance of the whole structure of a plastic multi-span greenhouse was analysed. The numerical results with assuming that the member joint are rigid condition were compared with the full-scale load test results using member joints used in the field. The stiffness of the entire structure was compared using the load-displacement relationship and the change of the load sharing ratio that the main members such as column, rafters, and wind break wall was analysed. The results of the load test were about 40% larger than the numerical result and the member stress was more than twice as large as those of the loaded columns. In order to increase the reliability of the design performance of the greenhouse, it is necessary to develop a numerical analysis model which can consider the characteristics of various joints.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.459-466
• /
• 2012

The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analysis in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. Here, it is essential more than anything else to find the correct TDC(Top Dead Center) position for the accuracy of engine output for diesel engine. Therefore this study is to analyze affecting factors to TDC position in 2-stroke large low speed engine and to suggest new method for determining correct TDC position. In the previous paper, it was mentioned that the accuracy of engine output is influenced by the determination of exact TDC position, and that 'Angle based sampling' method is better than 'Time based sampling' method in terms of precision. It was confirmed that there is 'Loss of angle', which is a difference between compression pressure peak and real TDC caused by heat loss and blow by of gas leakage. Consequently we invented new method, called "An improved method of time based sampling", which can obtain the correct engine output. The results by this method with compensating loss of angle was shown the same result by the 'Angle based sampling' method in encoder setting cylinder. This study is to suggest the new measuring method of exact engine output, and to examnine the reliance on the outcome.