• KSCI Review
• /
• v.1 no.2
• /
• pp.47-72
• /
• 1995

지금까지 나타난 많은 리더십 이론이 주로 기독교 문화권인 서구에서 연구된 것을 문화권이 다른 우리나라에 적용하고자 하는 것이 기존의 연구 경향이었다. 오랫동안 전통이 되어 온 우리 특유의 조직 문화 중에서 특히 관료적이고 권위주의적인 조직 문화에 새로운 변화가 일어나고 있는 과도기적인 현시점에서 최근에 나타난 리더십 이론인 B.M.Bass의 변형적 리더십 이론을 모델로 하여 우리 기업에 적절한 리더십 유형을 찾는 것이 일차적 목적이며 여기서 찾아낸 리더십 유형 별로 조직원의 상사 만족도에 미치는 영향을 알아보는 것이 이 연구의 목적이었다. 따라서 이 논문에서 제시한 리더십 유형을 보면 변혁적 리더십 유형에 속하는 것으로 지원적 배려, 카리스마, 과업 동기 자극으로 3분류하였으며 거래적 리더십 유형에 속하는 것으로 상황적 보상, 예외 관리, 소극적 관리로 3분류하여 모두 6유형을제시하고 신뢰성과 타당성을 확인하였다. 실증 연구 결과를 보면 우리나라는 거래적 리더십유형인 상황적보상, 예외 관리, 소극적 관리가 모두 조직원의 상사 만족도에 영향을 미치는것으로 나타나 Bass의 주장과는 다소 상이하다. 그러나 변혁적 리더십 유형인 카리스마, 지원적 배려, 과업 동기 자극에서는 카리스마만이 조직원의 상사 만족도에 영향을 미치고 지원적 배려는 영향력의 정도가 미약하며 과업 동기 자극은 거의 영향을 미치지 못하는 것으로 나타났다. 따라서 리더의 부하 통솔 및 지도 방향에서 아직도 우리나라에서는 거래적 요소가 짙다는 것을 알 수 있었다. 비록 당분간은 리더가 거래적 리더십을 많이 사용하겠지만 기업의 역사가 길어지고 종업원의 교육 훈련의 기회가 많아지면 변혁적 리더십으로 전환되리라 생각된다.가 단층원주상피세포와 단층입방상피가 부위에 따라 다르게 분포하고 있으며, 상피세포 및 결합조직에는 두터운 근육층이 있어 음경의강한 운동성이 감지 되었다. 제주도 내의 서귀포 부근에서는 현재 천연기념물로 지정되어 있는 서귀포층내에서 많은 화석들이 산출되고 있다. 이 시대는 빙하기와 간빙기가 교호하던 시대로서, 분석 결과에 의하면 서귀포층이 쌓일 당시에 우리 나라는 빙하기의 영향을 받았던 것으로 생각된다.is)은 근섬유가 산재된 두꺼운 벽을 가졌으며 상음경보다 굵은 원통형이었다. 내강은 많은 돌출부에 의해 복잡하게 나뉘어 있으며 상피세포는 원주 세포로 이루어져 있었고 섬모는 관찰되지 않았다. 내강 내의 분비물과 세포의 형태로 보아 내강상피세포는 분비기능을 가진 것으로 사료된다.술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.89-96
• /
• 2018

In this paper, we proposed a parametric estimation method for estimating H/W cost by using the development data of professional service robot in Korea. In addition, we derived the factors and weights that we can estimate the costs depending on the application environmental conditions of the robot. For the analysis, we developed the equation of professional service robot cost estimation using parametric method. We also derived the adjustment factors and following weights through FGI and Delphi for environmental conditions. We have developed a cost estimation equation that reflects the weight, volume, and manufacturing difficulty, and can derive a relational equation that reflects the environmental factors(dust/water, heat/cold, safety, test, technology innovation). This provides an objective basis for estimating the cost of professional service robots and will lead to ongoing research for estimating the H/W development cost of professional service robots. In the future, we will increase reliability by collecting abundant data, and will strengthen models through finding functional factors.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.1
• /
• pp.47-54
• /
• 2008

In this paper, we propose an auto-detection algorithm of basal cell carcinoma(BCC) from the protophorphyrin IX(PpIX) fluorescence image induced by appling the methyl 5-aminolaevulinate(MAL) ointment-induced protophorphyrin IX(PpIX) to the skin tumour area and then shining the wood lamp on the area. The proposed algorithm first generates 3 mask areas-tumor area, suspected tumor area and tumor free area and then applies local watershed algorithm to the turner and the suspected tumor areas to make small watershed regions that include similar luminance value pixels. Next, small watershed regions are merged by hierarchical queue based fast region merging that uses the difference between the average luminance values of adjacent watershed regions as a region merging criterion and finally BCC regions are detected. 50 tissue samples are acquired from the tumour regions of 10 patients with BCC that are extracted by using the proposed algorithm and are performed pathological examination by expert dermatologist. Experiment result shows the rate of tumor detection from BCC lesion using presurgical in vivo of MAL-indeuced PpIX fluorescence has high sensitivity 94.1% and relatively high specificity 82.6%.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.245-252
• /
• 2020

Recently, as the income level of consumers increases, interest in tourism products has increased, competition among tourist destinations has been fierce. Storytelling ads are drawing attracting attention as one of the ways to establish differentiated positioning for tourism products. This study investigates the role of the involvement of tourism activity in the storytelling ads effects, and examines the effects of the attitude toward storytelling ads on tourist destination commitments, visit intention and SNS WOM (word-of-mouth) intention. This study also empirically tests the role of mental simulation in the relationship between storytelling ads attitudes and visit intention. A total of 255 usable responses were obtained from a sample of 270 consumers aged 18 or older in South Korea. Following the two-stage approach of model validation, measurement validity of each construct appearing in the structural model and hypothesized structural paths were tested. The findings show that all hypotheses are supported except H3 that posits the impact of attitude toward the storytelling ads on visit intention and mental simulation showed a moderate effect on the relationship between ads attitude and visit intention in the case of rational appeal. This study suggests that the production of storytelling ads of tourist destinations can be effective strategy to improve regional competitiveness and increase visit and SNS WOM intention.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.61-67
• /
• 2017

As transistor density increases rapidly, a heat flux from IC device rises at fast rate. Thermal issues raised by high heat flux cause IC's performance and reliability problems. To solve these thermal management problems, the conventional cooling methods of IC devices were reached their thermal limit. As a result, alternative cooling methods such as liquid heat pipe, thermoelectric cooler, thermal Si via and etc. are currently emerging. In this paper microchannel liquid cooling system with TSV was investigated. The effects of 2 coolants (DI water and ethylene glycol 70 wt%) and 3 metal bumps (Ag, Cu, Cr/Au/Cu) on cooling performance were studied, and the total heat flux of various coolant and bump cases were compared. Surface temperature of liquid cooling system was measured by infrared microscopy, and liquid flowing through microchannel was observed by fluorescence microscope. In the case of ethylene glycol 70 wt% at $200^{\circ}C$ heating temperature, the total heat flux was $2.42W/cm^2$ and most of total heat flux was from liquid cooling effect.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.163-169
• /
• 2019

Sn-Pb solder alloys in electronics rapidly has been replaced to Pb free solder alloys because of various environmental regulations such as restriction of hazardous substances directive (RoHS), European Union waste electrical, waste electrical and electronic equipment (WEEE), registration evaluation authorization and of chemicals (REACH) etc. Because Sn58%Bi (in wt.%) solder alloy has low melting point and higher mechanical properties than that of Sn-Pb solder, it has been studied to manufacture electronic components. However, the reliability of Sn58%Bi solder could be lowered because of the brittleness of Bi element included in the solder alloy. Therefore, we observed the microstructures of Sn58%Bi composite solders with various contents of Sn-decorated multiwalled carbon nanotube (Sn-MWCNT) particles and evaluated bonding strength of the FR-4 components assembled with Sn58%Bi composite solder. Also, microstructures and bonding strengths of the Sn58%Bi composite solder joints were evaluated with the number of reflows from 1 to 7 times, respectively. Bonding strengths and fracture energies of the Sn58%Bi composite solder joints were measured by die shear test. Microstructures and fracture modes were observed with scanning electron microscope (SEM). Microstructures in the Sn58%Bi composite solder joints were finer than that of only Sn58%Bi solder joint. Bonding strength and fracture energy of Sn58%Bi composite solder including 0.1 wt.% of Sn-decorated MWCNT particles increased up to 20.4% and 15.4% at 5 times in reflow, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.101-111
• /
• 2017

This study propose a method to predict the bus arrival time by considering the signal delay time which is an element which can not be considered in the current bus arrival prediction information generation algorithm. In order to consider the signal delay time, travel time is divided into three components: service time, cruising travel time, and signal delay time. Signal delay time was estimated using intersection arrival time and TOD. The results show that most of the errors that occurred in predicting the arrival time are within about 30 seconds. Some of the estimates have large errors due to the nature of this methodology that uses the estimated value of the intersection arrival time rather than the observation value. It is also difficult to predict the arrival time of the express buses using this method. Future studies such as improving this through real-time location information will greatly improve the accuracy of the methodology.

• Solar Energy
• /
• v.11 no.3
• /
• pp.3-8
• /
• 1991

There are fifteen solar radiation measurement stations over the entire country in Korea. However, they are not capable of supplying reliable solar radiation data for remote areas including islands. The un-manned automated insolation measurement station is suitable for these areas due to the electric power shortage and the maintenance problems at these isolated areas. Our main aim in this work is to develop a solar radiation measurement system which collects and stores data by itself utilizing a PV module and a battery as power source for entire system irregardless of the environmental condition. A developed KIER's prototype system along with an independent HWS reference system has been installed at the designated remote island, Dok-do. Global solar radiation has been measured every hour for a 6-month period of time by both systems at this site. A comparison between the measured solar radiation data by each system indicates that there is an excellent agreement showing average 3.0% of an absolute error. It has been observed that the 8-month average global solar radiation was $2,330W/m^2$ day at this island. We came to the conservative conclusion that the developed KIER system is applicable for measuring solar radiation and for supplying reliable fundamental design data for solar energy utilization system at the remote areas.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.802-810
• /
• 2006

For a thorough train control, the precise train position detection is necessarily required. The widely used current way for train position detection is the one of using track circuits. The track circuit has a simple structure, and has a high level of reliability. However trains can be detected only on track circuits, which have to be installed on all ground sections, and much amount of cost for its installation and maintenance is needed. In addition, for the track circuit, only discontinuous position detection is possible because of the features of the closed circuit loop configuration. As the recent advances in telecommunication technologies and high-tech vehicle-based control equipments, for the train position detection, the method to detect positions directly from on trains is being studied. Vehicle-based position detection method is to estimate train positions, speed, timing data continuously, and to use them as the control information. In this paper, the features of GPS navigation and DR navigation are analyzed, and the navigation filters are designed by constructing vehicle-based train position detection method by combining GPS navigation and DR navigation for their complementary cooperation, and by using kalman filter. The position estimation performance of the proposed method is also confirmed by simulations.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.289-294
• /
• 2007

It has been 10 years Since December 1996 when CM method was institutionalized by Construction Industry Fundamental law. Even though construction market has been in stagnant of business activities till now, CM in Korea started to be activated by the introduction of CM method i.n public construction. In the end of 2005, the number of CM order's contract is 6.7 times , an amount of CM order's money is 9.2 times more than operation plan of CM system announced in 2001. Therefore, CM market has been dramatically growing. However, it is judged that the shortage of faith in CM project and necessity of CM method are not recognized and study on a owner who affects successful settlement of CM has not been performed. When considering those points, in introduction and practical use of CM, CM is suggested to the field which is necessary for a client through the task performance level research and analysis of a owner who act a important role to activate Construction Management. As result of studying pre-existing papers to i.nvestigate of owner's capability level, the task function of a client is classified into 10 types and a public opinion poll was performed based on the 10 types of function.