• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.421-430
• /
• 2004

Clinically, it is almost impossible for a physician to distinguish subtle changes of frequency spectrum by using a stethoscope alone especially in the early stage of thrombus formation. Considering that reliability of mechanical valve is paramount because the failure might end up with patient death, early detection of valve thrombus using noninvasive technique is important. Thus the study was designed to provide a tool for early noninvasive detection of valve thrombus by observing shift of frequency spectrum of acoustic signals with computer aid diagnosis system. A thrombus model was constructed on commercialized mechanical valves using polyurethane or silicon. Polyurethane coating was made on the valve surface, and silicon coating on the sewing ring of the valve. To simulate pannus formation, which is fibrous tissue overgrowth obstructing the valve orifice, the degree of silicone coating on the sewing ring varied from 20％, 40％, 60％ of orifice obstruction. In experiment system, acoustic signals from the valve were measured using microphone and amplifier. The microphone was attached to a coupler to remove environmental noise. Acoustic signals were sampled by an AID converter, frequency spectrum was obtained by the algorithm of spectral analysis. To quantitatively distinguish the frequency peak of the normal valve from that of the thrombosed valves, analysis using a neural network was employed. A return map was applied to evaluate continuous monitoring of valve motion cycle. The in-vivo data also obtained from animals with mechanical valves in circulatory devices as well as patients with mechanical valve replacement for 1 year or longer before. Each spectrum wave showed a primary and secondary peak. The secondary peak showed changes according to the thrombus model. In the mock as well as the animal study, both spectral analysis and 3-layer neural network could differentiate the normal valves from thrombosed valves. In the human study, one of 10 patients showed shift of frequency spectrum, however the presence of valve thrombus was yet to be determined. Conclusively, acoustic signal measurement can be of suggestive as a noninvasive diagnostic tool in early detection of mechanical valve thrombosis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.39-48
• /
• 2010

Recreation forests are in the spotlight as the place for personality development, mind and body comfort, companionship, and environment education in forests and valleys. Visitors to recreation forests have been on the increase along with booming in recreation forest building since 1988. Recreation forests are being categorized according to some features such as regional and environmental condition. Recreation forests, however, have not met the expectations of some visitors who want to take a rest with calmness due to the influence of the 5-day-work-week system, increasing interest in rest, leisure, and well-being, and users converge during weekends, summer, and the tourist season. In order to improve visitors' satisfaction efficiently, this study surveyed the level of satisfaction in each cluster based on the precedent study which had classified 85 national or public recreation forests in Korea into clusters. Questionnaires were distributed properly to each cluster and, of the 1,132 questionnaires collected, 1,015 were valid and used for analysis. Reliability of questionnaires and statistical validity of the model were verified. As a result, there are meaningful differences in the ranking of independent variables which affect the level of satisfaction according to clusters. Variables in rest and fatigue recovery have the strongest influence on the level of satisfaction in the clusters of potential factor, internal activation factor, and mixed potential capacity factor. In the use performance and visiting condition factor cluster, appropriateness of visit cost is most influential and, in the education cluster, connectivity with tourist attractions around it is most affective. These results can provide priority in services and maintenance of recreation forests for improving the level of satisfaction and differentiate the distribution of resources according to clusters.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.109-124
• /
• 2021

This study tried to verify the causal relationship that SMEs' organizational culture and self-efficacy would affect job crafting and job satisfaction. Unlike previous domestic studies that have been studied for organizational culture at the organizational level and self-efficacy at the individual level, this study tried to verify the interaction between job crafting and job satisfaction using different mechanisms as antecedent factors. In order to verify the research model of this study, questionnaires of 144 small and medium-sized enterprises (SMEs) workers located in Seoul and metropolitan areas were analyzed. Factor analysis and correlation analysis were performed to verify the reliability and validity of the research model on the relationship between variables, and empirical analysis was performed using regression analysis and mediation effect analysis to verify the hypothesis. The results of the study were first, that organizational culture and self-efficacy had a positive (+) effect on job crafting. On the other hand, relationship-oriented culture and hierarchical-oriented culture, which are sub-factors of organizational culture, were found to be insignificant. Second, organizational culture and self-efficacy were found to have a positive (+) effect on job satisfaction. On the other hand, it was found that market-oriented culture and hierarchical-oriented culture, which are sub-factors of organizational culture, were not significant. Third, job crafting was found to have a positive (+) effect on job satisfaction. On the other hand, it was found that the sub-factors of job crafting, disruptive job demands and social job resources, were not significant. This means that organizational culture partially affects job crafting and job satisfaction of SMEs, and job crafting also partially affects job satisfaction. The implications of this study are first, suggesting the meaning of SME organizational culture for stable and efficient human resource management for SMEs suffering from low productivity and high turnover rate. Second, it was meaningful to understand the possibility of introducing job crafting as an effective job management plan for SMEs. Third, in the current situation where there are few cases of practical introduction of job crafting, research on understanding job crafting for SMEs and improving job satisfaction is thought to be helpful in improving the productivity of SMEs.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.3
• /
• pp.97-110
• /
• 2019

This study analyzed various factors of influence affecting the will to start a business and established and empirically analyzed a research model to see which factors significantly affect the will to start a business. To this end, we investigated the general characteristics and experiences of individuals, conducted a study on the will to start a business, and analyzed the entrepreneurship passion for startups, the ability to find business opportunities, and the ability to connect with partner companies. The intent to start a business survey was investigated in a recertive style with a 7 point scale, and the reliability and feasibility review were analyzed through the PLS analysis method, which enables the implementation of a measurement model and a structural model. To collect valid data, the survey was conducted using an entrepreneurial curriculum class hours to collect and analyze 421 data. In summary, the results are as follows: First, college students have many opportunities to develop their capabilities through competitions held by universities and support institutions, and by utilizing them, they have no fear of starting a business. Second, the ability of students to discover product clients themselves has been improved by fostering entrepreneurship in the special lectures on startup in universities. Third, it can be seen that it has received various information on startups from support agencies to enhance its commitment to startups. The implications are as follows. First, they should foster entrepreneurship among college students by offering practical oriented courses that can broaden their understanding of startups. Second, it needs to be improved from entrepreneurial enthusiasm to a program that can grow into a company that can collaborate with partner companies and confirm its commitment to corporate establishment and product development and determine market opportunities. Third, it is necessary to establish an ecosystem of start-ups that can carry out systematic planning and performance management as it is weak to carry out projects with will to startups.

• The Journal of Korean Academy of Sensory Integration
• /
• v.16 no.3
• /
• pp.34-49
• /
• 2018

Objective : This study aimed to examine the psychometric properties of Korean version of Pediatric Volitional Questionnaire (PVQ-K) using classical test theory. Methods : For the translation of Pediatric Volitional Questionnaire (PVQ), as recommended in the literature, four-stage translation method was used. For the psychometric properties of Korean version of the Pediatric Volitional Questionnaire (PVQ-K), internal consistency reliability, content validity, and construct validity of the test using the known groups method and convergent and divergent methods were examined. For the recruitment of participants, a convenience sampling method is used. Participants of this study were 10 children with neuro-developmental disabilities hospitalized two different rehabilitations center and 10 children with typical development living in Daejeon, South Korea. All 20 participants were in aged from two to five years. Results : In terms of the content validity index, it was over 0.78, confirmed by nine experts of children development. PVQ-K successfully discriminated the scores of children with typical development from those with neurodevelopmental disabilities (p < .05). It is found that there is significant correlations between achievement stage of PVQ-K and the Korean Developmental Screening Test for Infants & Children (K-DTS)(.652 ~ .799 for subcategory, .706 for total scale). The internal consistency was .944 (Cronbach's ${\alpha}$). In qualitative content analysis, it was examined that how Korean children behave and respond in the environment, and how children's volition was strengthened or weakened by the environment. Conclusion : The results propose that PVQ-K can be a useful occupation-focused measure. This study recommend further study on PVQ-K with larger samples combined with the item-response theory approach.

• Korean Journal of School Psychology
• /
• v.16 no.3
• /
• pp.433-451
• /
• 2019

This study aimed to develop and validate the Classroom Problem Behavior Scale - Elementary School Version (CPBS-E) measure which is unique to classroom problem behavior exhibited by Korean elementary school students. The focus was on developing a universal screening instrument designed to identify and provide intervention to students who are at-risk for severe social-emotional and behavioral problems. Items were initially drawn from the literature, interviews with elementary school teachers, common office discipline referral measures used in U.S. elementary schools, penalty point systems used in Korean schools, 'Green Mileage', and the Inventory of Emotional and Behavioral Traits. The content validity of the initially developed items was assessed by six classroom and subject teachers, which resulted in the development of a preliminary scale consisting of 63 two-dimensional items (i.e., Within Classroom Problem Behavior and Outside of Classroom Problem Behavior), each of which consisted of 3 to 4 factors. The Within Classroom Problem Behavior dimension consisted of 4 subscales (not being prepared for class, class disruption, aggression, and withdrawn) and the Outside of Classroom Problem Behavior dimension consisted of 3 subscales (rule-violation, aggression, and withdrawn). The CPBS-E was pilot tested on a sample of 154 elementary school students, which resulted in reducing the scale to 23 items. Following the scale revision, the CPBS-E was validated on a sample population of 209 elementary school students. The validation results indicated that the two-dimensional CPBS-E scale of classroom problem behavior was a reliable and valid measure. The test-retest reliability was stable at above .80 in most of the subscales. The CPBS-E measure demonstrated high internal consistency of .76-.94. In examining the criterion validity, the scale's correlation with the Teacher Observation of Classroom Adaptation-Checklist (TOCA-C) was high and the aggression and withdrawn subscales of the CPBS-E demonstrated high correlations with externalization and internalization, respectively, of the Child Behavior Checklist - Teacher Report Form CBCL-TRF). In addition, the factor structure of the CPBS-E scale was examined using the structural equation model and found to be acceptable. The results are discussed in relation to implications, contributions to the field, and limitations.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.61-79
• /
• 2023

This study is a case study of overseas banana farms as a global agricultural startup that has hardly been attempted so far in terms of paradigm shift in the industry, beyond regional limitations. It was researched for the purpose of revealing the success factors of 'global agricultural startup' in terms of business process, entrepreneurship, and management dimensions learned through direct participation and observation at the local level. In order to study global agricultural startups, this study also conducted a comparative analysis of global startups (global startups) and global agricultural startups(global agricultural startups). In fact, the analysis consists of 'definition', 'components', and 'success factors', and we want to confirm the difference between the two concepts that can be distinguished. The case analysis tried to maximize the advantages of 'participatory action research' by directly observing and experiencing banana farms. In the case of banana farm cases, by dividing them into preparation process for farm development and farm development and management process, various variables considered in farm management were explained through the whole process of farm management. Through the process of overcoming and responding to specific failure cases, we tried to secure the reliability and validity of the research, and the case studies related to entrepreneurship, management, and organization analyzed by applying them by subdividing them into theoretical areas belonging to components and management that were theorized in existing preceding studies. This study is almost the first study on the process of creating a local entry business by directly moving the head office overseas rather than entering overseas agriculture as a subsidiary, joint venture or overseas corporation. In particular, it is a unique case that corresponds to agriculture in terms of region(Africa), scale(startup), and industry that have not been introduced so far as a global agricultural startup. In terms of entrepreneurship, it also concretely exemplified how entrepreneurship components such as innovativeness, risk-taking propensity, proactiveness, vision sharing, social contribution, leadership, etc., which have not been attempted so far in agricultural cases, are manifested and effective. The management and cultural aspects also went beyond the argument that only cultural aspects are important in overseas business, and also confirmed individual failure cases and their responses in recruitment, job, wage, retirement, development, organizational structure management, etc. As a result, there is significance and implications of this study in that it provides theoretical confirmation as well as practical and responsive basis for 'entrepreneurship', 'farming management', and 'management' aspects in overseas agricultural startup business operation.

• Journal of Venture Innovation
• /
• v.7 no.1
• /
• pp.91-110
• /
• 2024

In this study, we compared and analyzed the influence of self-leadership on innovative behavior and the mediating effect of job satisfaction among R&D practitioners in manufacturing and information communication technology (ICT) industries. To accomplish this, we conducted an online survey using random sampling methods and collected data from 209 respondents. We employed exploratory factor analysis, reliability analysis, correlation analysis, multiple regression analysis, and mediation analysis using SPSS 20.0 software to analyze the data and to compare differences between the manufacturing and ICT sectors. The research findings are as follows: Firstly, both in manufacturing and ICT sectors, self-leadership showed significant positive correlations with job satisfaction and innovative behavior. Secondly, in the analysis of the impact of self-leadership on innovative behavior, in the manufacturing sector, only natural reward strategy and constructive thought strategy showed significant positive effects, while in the ICT sector, behavioral-oriented strategy, natural reward strategy, and constructive thought strategy all showed significant positive effects. Thirdly, in the analysis of the impact of self-leadership on job satisfaction, in the manufacturing sector, only natural reward strategy and constructive thought strategy showed significant positive effects, while in the ICT sector, behavioral-oriented strategy and natural reward strategy showed significant positive effects. Fourthly, in the analysis of the impact of job satisfaction on innovative behavior, significant positive effects were observed in both manufacturing and ICT sectors, with manufacturing sector having relatively greater impact than ICT sector. Lastly, the results of the analysis on the mediating effect of job satisfaction indicate that in the manufacturing sector, only a constructive thinking strategy significantly influences, showing partial mediating effects. However, in the ICT sector, no mediating effects of job satisfaction were observed for any sub-factors of self-leadership. These research findings highlight differences in the mechanisms of action of self-leadership on innovative behavior and its mediating effects between the manufacturing and ICT sectors. Furthermore, the results suggest the importance of improving organizational strategies and culture towards promoting leadership, job design, and job satisfaction, considering the characteristics of each industry and research and development organization.

• Journal of Distribution Research
• /
• v.16 no.4
• /
• pp.1-27
• /
• 2011

Introduction: Sales of private labels(PU have been growing m recent years. Globally, PLs have already achieved 20% share, although between 25 and 50% share in most of the European markets(AC. Nielson, 2005). These products are aimed to have comparable quality and prices as national brand(NB) products and have been continuously eroding manufacturer's national brand market share. Stores have also started introducing premium PLs that are of higher-quality and more reasonably priced compared to NBs. Worldwide, many retailers already have a multiple-tier private label architecture. Consumers as a consequence are now able to have a more diverse brand choice in store than ever before. Since premium PLs are priced higher than regular PLs and even, in some cases, above NBs, stores can expect to generate higher profits. Brand extensions and private label have been extensively studied in the marketing field. However, less attention has been paid to the private label extension. Therefore, this research focuses on private label extension using the Multi-Attribute Attitude Model(Fishbein and Ajzen, 1975). Especially there are few studies that consider the hierarchical effect of the PL's two parent brands: store brand and the original PL. We assume that the attitude toward each of the two parent brands affects the attitude towards the extended PL. The influence from each parent brand toward extended PL will vary according to the perceived fit between each parent brand and the extended PL. This research focuses on how these two parent brands act as reference points to one another in the consumers' choice consideration. Specifically we seek to understand how store image and attitude towards original PL affect consumer perceptions of extended premium PL. How consumers perceive extended premium PLs could provide strategic suggestions for retailer managers with specific suggestions on whether it is more effective: to position extended premium PL similarly or dissimilarly to original PL especially on the quality dimension and congruency with store image. There is an extensive body of research on branding and brand extensions (e.g. Aaker and Keller, 1990) and more recently on PLs(e.g. Kumar and Steenkamp, 2007). However there are no studies to date that look at the upgrading and influence of original PLs and attitude towards store on the premium PL extension. This research wishes to make a contribution to this gap using the perceived fit difference between parent brands and extended premium PL as the context. In order to meet the above objectives, we investigate which factors heighten consumers' positive attitude toward premium PL extension. Research Model and Hypotheses: When considering the attitude towards the premium PL extension, we expect four factors to have an influence: attitude towards store; attitude towards original PL; perceived congruity between the store image and the premium PL; perceived similarity between the original PL and the premium PL. We expect that all these factors have an influence on consumer attitude towards premium PL extension. Figure 1 gives the research model and hypotheses. Method: Data were collected by an intercept survey conducted on consumers at discount stores. 403 survey responses were attained (total 59.8% female, across all age ranges). Respondents were asked to respond to a series of Questions measured on 7 point likert-type scales. The survey consisted of Questions that measured: the trust towards store and the original PL; the satisfaction towards store and the original PL; the attitudes towards store, the original PL, and the extended premium PL; the perceived similarity of the original PL and the extended premium PL; the perceived congruity between the store image and the extended premium PL. Product images with specific explanations of the features of premium PL, regular PL and NB we reused as the stimuli for the Question response. We developed scales to measure the research constructs. Cronbach's alphaw as measured each construct with the reliability for all constructs exceeding the .70 standard(Nunnally, 1978). Results: To test the hypotheses, path analysis was conducted using LISREL 8.30. The path analysis for verification of the model produced satisfactory results. The validity index shows acceptable results(${\chi}^2=427.00$(P=0.00), GFI= .90, AGFI= .87, NFI= .91, RMSEA= .062, RMR= .047). With the increasing retailer use of premium PLBs, the intention of this research was to examine how consumers use original PL and store image as reference points as to the attitude towards premium PL extension. Results(see table 1 & 2) show that the attitude of each parent brand (attitudes toward store and original pL) influences the attitude towards extended PL and their perceived fit moderates these influences. Attitude toward the extended PL was influenced by the relative level of perceived fit. Discussion of results and future direction: These results suggest that the future strategy for the PL extension needs to consider that positive parent brand attitude is more strongly associated with the attitude toward PL extensions. Specifically, to improve attitude towards PL extension, building and maintaining positive attitude towards original PL is necessary. Positioning premium PL congruently to store image is also important for positive attitude. In order to improve this research, the following alternatives should also be considered. To improve the research model's predictive power, more diverse products should be included in study. Other attributes of product should also be included such as design, brand name since we only considered trust and satisfaction as factors to build consumer attitudes.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.77-81
• /
• 2009

Purpose: The PET of the PET/CT (Positron Emission Tomography/Computed Tomography) quantitatively shows the biological and chemical information of the body, but has limitation of presenting the clear anatomic structure. Thus combining the PET with CT, it is not only possible to offer the higher resolution but also effectively shorten the scanning time and reduce the noises by using CT data in attenuation correction. And because, at the CT scanning, the contrast media makes it easy to determine a exact range of the lesion and distinguish the normal organs, there is a certain increase in the use of it. However, in the case of using the contrast media, it affects semi-quantitative measures of the PET/CT images. In this study, therefore, we will be to establish the reliability of the SUV (Standardized Uptake Value) with CT data correction so that it can help more accurate diagnosis. Materials and Methods: In this experiment, a total of 30 people are targeted - age range: from 27 to 72, average age : 49.6 - and DSTe (General Electric Healthcare, Milwaukee, MI, USA) is used for equipment. $^{18}F$- FDG 370~555 MBq is injected into the subjects depending on their weight and, after about 60 minutes of their stable position, a whole-body scan is taken. The CT scan is set to 140 kV and 210 mA, and the injected amount of the contrast media is 2 cc per 1 kg of the patients' weight. With the raw data from the scan, we obtain a image showing the effect of the contrast media through the attenuation correction by both of the corrected and uncorrected CT data. Then we mark out ROI (Region of Interest) in each area to measure SUV and analyze the difference. Results: According to the analysis, the SUV is decreased in the liver and heart which have more bloodstream than the others, because of the contrast media correction. On the other hand, there is no difference in the lungs. Conclusions: Whereas the CT scan images with the contrast media from the PET/CT increase the contrast of the targeted region for the test so that it can improve efficiency of diagnosis, there occurred an increase of SUV, a semi-quantitative analytical method. In this research, we measure the variation of SUV through the correction of the influence of contrast media and compare the differences. As we revise the SUV which is increasing in the image with attenuation correction by using contrast media, we can expect anatomical images of high-resolution. Furthermore, it is considered that through this trusted semi-quantitative method, it will definitely enhance the diagnostic value.