• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.974-982
• /
• 2009

To improve the effectiveness and economics the bridge design methodology considering the bridge/rail longitudinal analysis and bridge/vehicle dynamic effect suggested in this study. The reliability-based Life-Cycle Costs(LCC) effective optimum design is applied to a 2-main steel girder bridge, 5$\times$(1@50m) for comparison with conventional design, initial cost optimization and equivalent LCC optimization. As a result of the optimum design based on reliability, it may be stated that the design of High-Speed railway bridges considering the bridge/rail longitudinal analysis and bridge/vehicle dynamic effect are more efficient than typical existing bridges and LCC optimization without respect to bridge/rail longitudinal analysis and bridge/vehicle dynamic effect. The result of optimization design considering the interaction, design methodology suggested in this study, is higher than result of initial cost optimization design in initial cost, but that has the advantage than result of initial cost optimization design in expected LCC.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.102-110
• /
• 2010

The reliability evaluation may be a efficient method for estimating of the quantitative structural safety considering the effect of uncertainties included in high-speed railway bridges. The expected life-cycle cost(LCC) based upon the reliability evaluation will reasonably offer the safety level and design criteria of high-speed railway bridges. Therefore, this study determined the expected life-cycle cost and optimal design method of high-speed railway bridges on the basis of the result of the numerical analysis and reliability evaluation. For this, after creating various design method based upon the standard design of high-speed railway bridges, the numerical analysis is conducted on each of the alternative design methods. The reliability evaluation by the design strength limit state function is conducted considering the effect of external uncertainties on the basis of the numerical analysis result. The expected life-cycle cost of high-speed railway bridges is calculated on the basis of the reliability evaluation result by each of the alternative design methods. Also, the optimal design method is determined using the calculated expected life-cycle cost. In addition, The result of reliability evaluation and expected life-cycle cost of optimal design method are examined considering the effect of internal uncertainties. It is expected that the result of this study can be used as a basic information for the systematic safety evaluation and optimal structure design of high-speed railway bridges.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.67-71
• /
• 1990

This study is concerned with the optimum design of stiffened cylindrical members frequently found in floating offshore platforms with constraints on reliability. Minimised is the expected total cost which is composed of the structural cost and the expected failure cost. Some design requirements drawn from variotus design codes are also considered as constraints. Reliability of critical component in a structure only is considered in this paper and the system failure is discarded since the probability of system failure is in general much smaller than the probability of component failure and it is very difficult to evaluate the cost due to system failure. Ultimate strength only is considered and not the fatigue strength. Several parametric studies are illustrated and the optimum solutions for different strength models which are now in use for the design of stiffened cylinders are derived to show the optimum designs against different strength models for the same type of structural component. The present results lead to the important conclusions relating to the posibility of more cost saving in the design of such structure through the reliability-based optimisation process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.4
• /
• pp.217-224
• /
• 2003

The objective of this paper is to suggest the technique of program to perform structural optimization design after reliability analysis to consider the uncertainties of structural reponses. AFOSM method is used for reliability analysis then, structural optimization design is developed for 10-bar truss and 3 span 10 stories planar frame model is subject to reliability indices and probability of failure by reliability analysis. SQP method is used for optimization design method, this method has many attractions. As a result of analyzing with having and not having constraints and uncertainty, the minimum weight of truss and planar frame increased respectively 20.92% and average 8.08%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.18-27
• /
• 2006

The conventional reliability based design optimization(RBDO) methods require high computational cost compared with the deterministic design optimization(DO) methods, therefore it is hard to apply directly to large-scaled problems such as an aerodynamic shape design optimization. In this study, to overcome this computational limitation the efficient RBDO procedure with the two-point approximation(TPA) and adjoint sensitivity analysis is proposed, that the computational requirement is nearly the same as DO and the reliability accuracy is good compared with that of RBDO. Using this, the 3-D aerodynamic shape design optimization is performed very efficiently.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.93-96
• /
• 2009

바퀴동력계는 차량에 지면으로부터 전달되는 힘과 모멘트를 측정하는 로드셀이다. 본 연구에서 개발한 바퀴동력계는 스트레인 게이지식 로드셀로써 이러한 로드셀을 설계하는데 있어서 몇가지 고려해야 하는 사항이 있다. 우선 스트레인 게이지를 부착하기 쉬운 구조가 되어야 하고 조립시의 오차를 줄이기 위하여 한 몸체로 제작되어야 한다. 이와 동시에 가장 중요하게 고려되어야 하는 인자로 감도를 위해 재료가 허용하는 응력내에서 되도록 큰 변형률이 발생해야 하고 상호 간섭 오차가 발생하지 말아야 한다. 본 연구에서는 수식을 이용하여 이론적으로 상호 간섭 오차를 0으로 만들 수 있었다. 또한 설계 변수 및 재료 물성치의 산포를 고려한 신뢰성 기반 최적설계 기법을 사용하였으며, 이를 통해 허용 응력하에서 최대의 변형률이 발생하는 바퀴동력계를 설계하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.471-471
• /
• 2012

도시유역에서 주로 침수피해가 발생하는 방류토구 인근의 저지대의 경우 유수지 및 빗물펌프장을 통하여 피해 발생을 방지할 수 있는 반면, 도심지 한복판에 이러한 상습 침수지역이 존재한다면 이에 대한 침수 방지 시설물의 설치에는 한계가 있다. 이러한 도심지 한복판의 침수위험지역의 경우 부지 확보의 어려움으로 인하여 유수지의 설치는 매우 제한적이며, 따라서 근래 대두되고 있는 것이 지하 저류공간의 건설 등이다. 그러나 본 연구에서는 이러한 지하 저류공간의 건설과 더불어 우수관망의 설계 자체를 침수피해 저감 측면에서 그 효과를 최대화하고자 하였다. 본 연구에서는 동일한 설계빈도하에 설계된 우수관망이라 하더라도 관망의 노선 선정에 따라서 초과강우사상에 따른 침수 발생량이 달라질 수 있다는 점에 주목하였다. 즉, 우수관망의 전체적인 구성에 있어서 설계빈도를 초과하는 강우사상에 대하여 그 부하량을 적정히 분배함으로써 관망의 전체적인 침수 발생 위험을 전반적으로 줄이는 것이다. 이를 통하여 확보되는 안전성은 지하 저류공간 등 각종 침수피해 저감 시설과 더불어 우수관망시스템의 침수피해 발생 위험을 전반적으로 줄일 수 있을 것이다. 본 연구에서는 이러한 목적하에 도시유역에서의 침수위험도 분석을 실시하였으며, 선행 연구를 통하여 제안된 우수관망의 신뢰도 산정 식을 토대로 목적함수를 아래의 식과 같이 구성하였다. $$Max.\;liability\;of\;Sewer\;Networks=1-\;{(1-N)^2+(1-V_i)^2\atop2}\;\cdots\cdots\cdots\;\;\;(1)$$ 여기서, $V_i$는 적용된 강우량당 유역의 전체 유출량 대비 월류발생량을 나타내며, $N_i$는 적용된 강우량당 해당 관망의 전체 지점 수 대비 월류 발생지점 수를 나타낸다. 이를 통하여 우수관망의 신뢰도를 최대화할 수 있는 최적설계 알고리즘을 개발하였으며, 실제 도시유역에 대한 적용을 통하여 최적 설계에 따른 신뢰도 향상 정도를 정량화하였다.

• Composites Research
• /
• v.26 no.1
• /
• pp.29-35
• /
• 2013

Composite sandwich structure can improve the specific bending stiffness significantly and save the weight nearly 30 percent compared with the composite laminates. However, it has more inherent uncertainties of the material property caused by manufacturing process than metals. Therefore, the reliability-based probabilistic design approach is required. In this paper, the PMS(Probabilistic Margin of Safety) is calculated for the simplified fuselage structure made of composite sandwich to provide the probabilistic reasonable evidence that the classical design method based on the safety factor cannot ensure the structural safety. In this phase, the probability density function estimated by CMCS(Crude Monte-Carlo Simulation) is used. Furthermore, the RBDO(Reliability-Based Design Optimization) under the probabilistic constraint are performed, and the RBDO-MPDF(RBDO by Moving Probability Density Function) is proposed for an efficient computation. The examined results in this paper can be helpful for advanced design techniques to ensure the reliability of structures under the uncertainty and computationally inexpensive RBDO methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.12
• /
• pp.1150-1159
• /
• 2011

Reliability is defined as a probability that a system will operate properly for a specified period of time under the design operating conditions without failure. Reliability-Redundancy Optimization Problem(RROP) involves selection of components with multiple choices, redundancy levels and redundancy strategy(Active or Standby) for maximizing system reliability with constraints such as cost, weight, etc. Based on the design configuration of Multi-Spectral Camera(MSC) system of KOMPSAT-2, the mathematical programming model for RROP is suggested in this study. Due to the nature of RROP, i.e. NP-hard problem, Parallel Particle Swarm Optimization(PPSO) algorithm is proposed to solve it. The result of the numerical experiment for RROP is presented as instance of recommended design configuration at some mission time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.37-43
• /
• 2010

In this paper, a reliability-based design optimization is developed for the topology design of linear structures using a performance measure approach. Spatial domain is discretized using three dimensional Reissner-Mindlin plate elements and design variable is taken as the material property of each element. A continuum based adjoint variable method is employed for the efficient computation of sensitivity with respect to the design and random variables. The performance measure approach of RBDO is employed to evaluate the probabilistic constraints. The topology optimizationproblem is formulated to have probabilistic displacement constraints. The uncertainties such as material property and external loads are considered. Numerical examples show that the developed topology optimization method could effectively yield a reliable design, comparing with the other methods such as deterministic, safety factor, and worst case approaches.