• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.1
• /
• pp.39-45
• /
• 1997

In this paper, a high speed motor drive system using an indirect adaptive neural network controller is proposed. In the variable high speed motor drives, the speed response can be deteriorated by long settling time and high overshoot. To obtain a good dynamical performance, an adaptive feedforward controller consisted of Neural Network Controller(NNC) and Neural Network Emulator(NNE) is applied. The NNE is used to identify the parameters and characteristics of high speed motor. To train the controller, the weights are dynamically adjusted using the back propagation algorithm. Computer simulation and implementation of the proposed system is described.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.426-429
• /
• 2000

In this paper, we propose a system identification and control method using bias-modified neural network. The proposed method performs, for a nonlinear plant with unknown functions, system identification using bias-modified neural network, and then controller is designed with those identified informations. In order to verify the usefulness of the proposed method, we simulated the proposed control method with one link manipulator system and confirmed the excellency.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.113-119
• /
• 2002

Recently, an automatic crane control system is required with high speed and rapid transportation. During the operation of crane system in container yard it is necessary to control the crane trolley position and loop length so that the swing of the hanging container is minimized We can do development of unmanned automation control system using automation travel control technique and anti-sway technique in crane system. Therefore, we designed a controller for Automation travel control to control the transfer crane system. Analyzed crane system through simulation, and proved excellency of control performance than other conventional controllers.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.1
• /
• pp.81-91
• /
• 1997

본 논문에서는 시스템 모델링이 어렵과 복잡한 자동화 설비를 위한 간단한 지능제어방식을 제안하나. 제안된 방식은 시스템 모델링이 불확실한 시스템에 대하여 입력신호와 직접관계되지 않은 비선형 함수의 동정은 퍼지-신경회로망을 이용하고, 입력신호와 관계되는 비선형 함수는 동정을 하지 않고 임의의 양의 실수로 놓으므로 기존의 전체함수 동정보다 적은량으로 동정할 수 있고, 동정된 정보를 이용하여 비선형 제어기를 설계하는 간단한 제어방식이다. 제안된 제어 방식의 유용성을 확인하기 위하여 자동화 설비에 액츄에이터로 많이 사용되는 직류 서보전동기를 이용한 역진자 시스템에 적용하여 시뮬레이션 및 실험을 하고, 제안된 제어방식을 기존의 신경회로망 제어방식과 제어성능을 비교 검토한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.6
• /
• pp.705-711
• /
• 2002

디젤기관은 실린더 내경의 크기, 실린더 수 및 회전수에 따라 착화지연, 연소지연 및 디젤기관의 각종 정수가 달라지므로 비선형이 심한 시스템이다. 본 연구에서는 신경회로망을 이용하여 발전기를 구동하는 디젤 기관의 속도를 제어하는 디젤기관 신경회로망 디지털조속기를 제안한다. 이를 위하여 3상 50㎾ 발전기를 구동하는 4행정 4실린더, 1800 rpm ISUTSU 디젤기관의 실제 운전데이터로부터 뉴럴에뮬레이터를 구한다. 최적치 뉴럴에뮬레이터 구성을 위하여 다양한 역전파알고리즘으로 학습을 행하고 결과를 비교한다. 또한 디젤기관의 역으로부터 뉴럴 제어기를 구성하고 뉴럴에뮬레이터로 시뮬레이션을 행한다. 외란이 존재하는 경우에도 효과적인 뉴럴제어기를 구성하기 위하여 선택적 뉴럴제어 기의 사용을 제안한다. 또한 응답성을 향상하고 정확한 목표치추종을 위하여 PI제어기를 보조제어기로 사용하는 하이브리드제어기를 구성하여 시뮬레이션을 통하여 성능이 향상됨을 보인다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.99-108
• /
• 1998

In this paper, we proposed a multi-layer neural network for direct control method of nonlinear system. The proposed control method uses neural network as the controller to learn inverse model of plant. The neural network used consists of two parts; one part is for identification of linear part, and the other is for identification of nonlinear part of inverse system. The neural network has to be learned the liner part with RLS algorithm and the nonlinear part with error of plant. From the simulation and experiment of tracking control to use one link manipulator as plant, we proved usefulness of the proposed control method to comparing to conventional direct neural network control method. By comparing the two methods, from simulation and experiment, we were convinced that the proposed control method is more simple and accuracy than the conventional method. Moreover, number of weight and bias to be controller parameter are small, and it has smaller steady state error than conventional method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.720-729
• /
• 2005

In this paper, we design the indirect adaptive controller using Wavelet Neural Network(WNN) for unknown nonlinear systems. The proposed indirect adaptive controller using WNN consists of identification model and controller. Here, the WNN is used in both Identification model and controller The WNN has advantage of indicating the location in both time and frequency simultaneously, and has faster convergence than MLPN and RBFN. There are several training methods for WNN, such as GD, GA, DNA, etc. In this paper, we present the Extended Kalman Filter(EKF) based training method. Although it is computationally complex, this algorithm updates parameters consistent with previous data and usually converges in a few iterations. Finally, ore illustrate the effectiveness of our method through computer simulations for the Buffing system and the one-link rigid robot manipulator. From the simulation results, we show that the indirect adaptive controller using the EKF method has better performance than the GD method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.127-139
• /
• 1996

In this paper we propose a new controller design method using hybrid fuzzy-neural netowrk and neural network identification in order ot control systems which are more and more getting nonlinearity. Proposed method performs, for a nonlinear plant with unknown functions, hybird identification using a fuzzy-neural network and a neural network, and then a stable nonlinear controller is designed with those identified informations. To identify a nonlinear function, which is directly related to input signals, we can use a neural network which is satisfied with the proposed stable condition. To identify a nonlinear function, which is not directly related to input signals, we can use a fuzzy-neural network which has excellent identification characteristics. In order to verify excellent control performances of the proposed method, we compare the porposed control method with a conventional neural network control method through simulations and experiments with one link manipulator.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2329-2331
• /
• 2004

본 논문에서는 이동 로봇의 경로 추종 제어를 위해 웨이블릿 신경 회로망에 기반한 예측 제어기의 설계 방법을 제안하고자 한다. 제안한 방법에 의해 설계된 제어기는 이동 로봇의 동특성을 예측하기 위한 웨이블릿 신경회로망 기반 예측기와 예측 제어기로 구성된다. 제안한 방법에서 모델링 및 제어기로 적용되는 신경 회로망의 장점과 우수한 해석 능력을 가진 웨이블릿 변환의 장점을 결합한 웨이블릿 신경 회로망을 이용하여 이동 로븟의 동특성을 모델링하여 예측 제어기에서의 비용 함수 최소화에 적용한다. 경로 추종 제어의 목적인 이동 로봇의 실제 출력과 예측기의 출력 오차를 최소화하기 위해 웨이블릿 신경 회로망의 파라미터 동정 및 예측 제어기는 경사 하강법을 이용하여 학습한다. 마지막으로 컴퓨터 모의 실험을 통하여 제안한 예측 제어 시스템의 적용가능성 및 효율성을 검증하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.151-151
• /
• 2000

The objective of this paper is to develop the new robust and adaptive control system against external environments as applying the probabilistic recognition which is one of the inherent properties of immune system, ability of learning and memorization, and regulation theory of immune network to the system under engineering point of view. In this paper, HIA(Humoral Immune Algorithm) PID controller using Neural Network Identifier was proposed to drive the autonomous guided vehicle(AGV) more effectively. To verify the performance of the proposed HIA PID controller, some experiments for the control of steering and speed of that AGV are performed.