• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.2
• /
• pp.2603-2609
• /
• 1972

A study on how the condition of farmland influences operating efficiency of a tractor came up with the following results in the primary experiment. (1) $10m{\times}30m$ plot of which length is shortest in this experiment, took a maximum of required time per onea plow, whereas $20m{\times}120m$ plot, whose length is longest in the same experiment, took a minimum of required time per one a to plow. It reveals, accordingly, that the proportion between width and length should be 1:6; the most desirable proportion that proves to most profitable in terms of time. (2) All the available efforts were made to diminish some unplowed parts of plot to a minimum. It was revealed, however, in the experiment that the ratio of unplowed plot leads to 7.52% in the plot 6; the highest ratio, and 3.44% in the plot 1; the lowe ratio. That shows us that the ratio of availability of land be higher in a more rectangular plot. (3) But even a rectangular plot allows lower ratio of availability in case that the width is narrow. It is showed that a higher ratio of availability can be obtained in when the width of plot is more than 20 meters at minimum. (4) In the operation of plowing by using a tracter, It was also revealed that we could not but have a quite a considerable loss in terms of both the ratio of availability and the required tine for plowing unless we maks a plan to with the unplowed part of plot.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.885-892
• /
• 2004

Weibull distribution Iincluding Rayleigh and Exponential distribution is a typical model to estimate the effort distribution which is committed to the software testing phase. This model does not represent standpoint that many efforts are committed actually at the test beginning point. Moreover, it does not properly represent the various distribution form of actual test effort. To solve these problems, this paper proposes the Sigmoid model. The sigmoid function to be applicable in neural network transformed into the function which properly represents the test effort of software in the model. The model was verified to the six test effort data which were got from actual software projects which have various distribution form and verified the suitability. The Sigmoid model nay be selected by the alternative of Weibull model to estimate software test effort because it is superior than the Weibull model.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.140-146
• /
• 2002

본 시험은 채종유박과 미강유박을 주원료로 하고 질소, 인산, 칼리의 함량이 7.23%이고 중금속이 거의 없이 개발된 유기질비료(크럼블-80)를 공시비료로 기비와 추비시비 방식의 포장시험을 통하여 토양과 한국잔디의 생육에 미치는 영향과 시비효율을 구명하여 올바른 시비방법 및 시비량을 제시하고자 2000년 4월부터 12월까지 경기도 용인시 소재 태광컨트리클럽 증식포(기비시험)와 경기도 파주시 소재 서서울컨트리클럽 10홀 티(추비시험)에서 실시하였다. 기비시험 결과, 엽록소 측정결과의 처리효과는 무처리구가 100일 때 관행구 117%, 관행구+크럼블-80 $150g/m^2$ 123%, 크럼블-80 $150g/m^2$ 115%, 크럼블-80 $300g/m^2$ 119%, 크럼블-80 $75g/m^2$ 102%로 효과가 있는 것으로 나타났다. 유기질비료인 크럼블-80은 시비량에 따라 엽록소 함량이 약간 증가되었으나 NPK와 혼합처리구에서 가장 높은 것은 공시비료의 단독처리보다는 복합비료와 혼용하는 것이 더 효과적인 것으로 나타났다. 추비시험 결과, 잔디생육기간 중 잔디건물중을 조사한 결과는 크럼블-80의 시용량이 많을수록 잔디건물중도 증가하였으며, 처리구에 따라 무처리구보다 5~45(%) 정도의 증수효과가 있는 것으로 나타났다. 그러나 엽록소함량은 처리구가 무처리구보다는 높았으나 골프코스에 필요한 녹색유지에는 부족하므로 화학비료와의 혼용시비가 필요하다고 판단된다. 본 시험결과로 볼 때 시험에 사용된 공시비료는 골프코스 잔디관리에 적합한 비료로 판단된다. 시험결과를 토대로 한 권장시비량은 기비시비의 경우 잔디식재 전에 공시비료 $300g/m^2$를 표토 10cm와 잘 혼합하여 시비하되, 추비시비는 공시비료와 화학비료와의 혼용시비가 필요하다고 판단된다.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.84-91
• /
• 2015

The purpose of this study is to suggest the reasonable model of the caliber in suction nozzle, the pressure of suction nozzle, and the flow rate about foam system of line proportioner type using in the pumpcar. To test this, the experimental study was accomplished on the ground of the standards for the Performance Certification and Product Inspection of Foam Fire-extinguishing Chemical Mixing Machine. Aqueous Film Forming Foam in 3% and pipe type air foam nozzle with line proportioner FE 40 type were used. Test result showed that the pressure of suction nozzle within the limits between 0.25 MPa and 0.35 MPa was appropriate when the caliber in suction nozzle is 4 mm. Also, the pressure of suction nozzle within the limits between 0.45 MPa and 0.60 MPa was appropriate in the higher pressure than 4 mm when the caliber in suction nozzle is 5 mm.

• Parasites, Hosts and Diseases
• /
• v.33 no.3
• /
• pp.173-178
• /
• 1995

A quantitative assay was performed on the effects of gamma-irradiation (30- 300 Gy) on intracellular proliferation of Toxoplosmn gonnii RH tachyzoites in human leukemic HL-60 cells and murine peritoneal macrophages by means of 3H-uracil uptake assay. Infected non-irradiation group (NI) and uninfected group (incubating only host cells) were prepared. The 3H-uracil uptake by tachyzoites of NI group 12-24 hrs after infection was 2,190-4,787 counts per minute for macrophages and 2,967-8,254 for HL-60 cells, whereas the irradiated tachyzoites revealed only 381-703 (100 Gy) and 218-408 (300 Gy) for macrophages, and 1,911-2,618 (30 Gy), 1,253-1,384 (70 Gyl, 1,013-1,090 (100 Gyl, and 483-588 (300 Gy) for HL-60 cells. The proliferation inhibition rate was similar in macrophages and HL-60 cells, for example, 89-94% and 80-94% respectively by 300 Gy, 12-24 hrs after infection. It is concluded that RH tachyzoites of T gondii are severely affected by gamma-irradiation in their capability of Intracellular proliferation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.62-68
• /
• 2018

This study was conducted to improve the shooting stability of self propelled artillery by improving the flick rammer system. The flick rammer system is designed to reduce crew fatigue and shorten the movement and loading time of the shell compared with the conventional manual loading system. Basically, in the flick rammer system of the shooting type, fall-back occurs intermittently, which causes problems in the rapid loading. To solve this problem, a detailed C.A.E. (Computer Aided Engineering) analysis of the internal structure of the existing rapid loading field was conducted. Through this, we sought a solution that can prevent fall-back by reducing the flying distance. We then optimized the loading station to reduce the flying distance and confirmed the possibility of suppressing the fall-back compared to the existing product through actual tests in the field.

• Korean journal of applied entomology
• /
• v.24 no.4 s.65
• /
• pp.179-182
• /
• 1986

The white grubs were collected from ginseng field and fallow lands to examine their external morphology and species components. They were divided into 3 subfamilies, i.e., Melolonthinae, Rutellinae, and Sericinae by the shape of anal slit and/or presence of elevated lines in stridulating area of mandible. Eight species were identified by means of comparing the shape of anal slit, setal arrangement of decasternite, and frontoepicranial series of setae. Larvae of Holotrichia diomphalia and H. morosa were observed to damage ginseng root in field.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.3-9
• /
• 2002

When a flooding a lot of debris are drained from rivet. Drained debris separated lodgement debris and floating debris, and floating debris moving other region by wind and ocean current. This experimentation throw three buoys which installed with DGPS and other devices in nak-dong river, and check there location every minute. In consequence of this experimentation, floating debris drained nak-dong river are gathered near Dadaepo seaside or drifted Dong hae. Ocean current and wind driven current are largely influenced then tide. Numerical analysis calculated by MAPCNTR(develop by KRISO) is similar to the result of this experimentation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.22-22
• /
• 2018

의료기기는 사용목적과 사용 시 인체에 미치는 잠재적 위해성의 정도에 따라 4개의 등급으로 분류하며, 두 가지 이상의 등급에 해당되는 제품의 경우에는 가장 높은 등급으로 분류하게 된다. 의료기기 품목허가를 위해서는 기술문서를 작성하여야 하며, 이를 위해서는 기술문서 심사를 신청하는 절차를 이해하여야 한다. 의료기기 기술문서란 의료기기의 성능과 안전성 등 품질에 관한 자료로서 해당 품목의 원자재, 구조, 사용목적, 사용방법, 작용원리, 사용 시 주의사항, 시험규격 등이 포함되는 문서를 말하며, '의료기기 허가 신청서'와 '첨부자료(임상시험자료 포함)'로 구성되어 있다. 의료기기 품목허가 시 제출되는 기술문서를 통하여 해당 의료기기의 안전성 및 성능이 충분히 입증되어야 하며, 인체 삽입되는 표면처리 임플란트를 포함한 인체 접촉 의료기기의 안전성의 경우 '의료기기의 생물학적 안전에 관한 공통 기준규격'에 따라 평가 후 제조 수입품목 허가를 진행해야 한다. 또한 성능의 경우는 해당 규격 또는 자사의 기준 및 시험방법에 따른 성능에 관한 자료, 물리 화학적 특성에 관한 자료를 통하여 평가되어야 하며, 기허가 인증된 제품에 한 번도 사용되지 않은 원재료 또는 적용부위 및 적용방법이 달라 안전성 및 유효성 확인이 필요한 경우 임상시험에 관한 자료가 요구될 수 있다. 본 발표에서는 이러한 인체 삽입용 표면처리 임플란트의 전반적인 인허가 절차에 대해서 안내하고자 한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.379-384
• /
• 2009

본 연구에서는 다세대 주택에서 발생되는 화재에서 가연물질이 되는 가구류에 대한 화재 특성을 파악하기 위해 단위 가연물에 대한 열방출율(HRR, Heat Release Rate), 연기발생량, 유독가스 발생량 등에 대한 기본 DB를 확보하고자 하였다. 실험에 사용된 단위가연 물에는 침대(매트리스 포함), 장롱, 화장대, 책상, 책장, 소파(3+1인용), TV, 싱크대(찬장포함), 냉장고, 이불(옷가지)등 총 12여종이며, 국제 시험 규격인 ISO 9705 시험법인 중규모 시험 장치(Room Corner Tester)와 10MW 급의 실규모화재실험장치(Large Scale Calorimeter)에서 실험을 진행하였다. 실험결과 냉장고에서 가장 높은 최대 열방출율 약 3051 kW, 장롱에서의 일산화탄소 방출량은 최대 약 3894.2 ppm, 이산화탄소의 방출량은 최대 약 1.8% 로 가장 높게 측정되었다. 이러한 중규모 시험 장치를 통한 단위 품목의 화재특성 DB 작성은 단위구획에서의 화재 확산 예측에 가장 중요한 요소가 될 수 있을 것이다.