• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.104-109
• /
• 2018

Generally, the durability of the parking lock gear is evaluated through an endurance test for the entire transmission but no test standard exists for the durability test of one part of a parking lock gear. Therefore, in this study, the durability test standards of the parking lock gear were determined autonomously, and the durability performance test was conducted. A static fracture test was carried out to determine the yield strength of the parking lock gear, and a durability test condition was set to 60 % of the yield strength. The durability test of 1,000,000 times was conducted under the given conditions using a dedicated test jig manufactured for the test. Because the jig fractured during the static fracture test, finite element analysis for the jig was carried out and the jig was re-designed. The modified jig was manufactured and the durability test was carried out based on the test standard of autonomously. The basic data on the performance and endurance limit of the parking lock gear were obtained using these tests and analyses, and the basic data will be used as fundamental materials for the design and the development of the parking lock gear.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2463-2469
• /
• 2011

The failure of display modules in cellular phones due to drop impact depends on the materials, stiffnesses and shapes of the phones. In the early development stage of cellular phones, the behavior of the display modules due to drop impact is tested using jigs where the display modules are installed. In this study, jigs of cellular phones for drop impact test of OLED modules were designed. The material, thickness and number and orientation of ribs were considered as design variables. Jigs were designed in a way that responses of modules due to drop impact were similar to those of modules in cellular phones. The maximum principal stresses at the upper glasses of modules were considered as responses, which were analyzed using a commercial software ABAQUS/Explicit. The drop impact analysis at the height of 1.5 meters showed that the responses of OLED module in the developed jig were in a good agreement with those in cellular phone.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2009-2010
• /
• 2011

AMI환경에서 댁내 전력정보표시장치가 코디네이터로서 지그비 네트워크를 운용할 수 있도록 모듈 형태의 지그비 모뎀을 개발함에 있어서, 스마트 에너지 프로파일 기반의 지그비 통신 어플리케이션 펌웨어와 무선으로 송수신한 정보를 IHD에 전달하기 위한 UART 프로토콜을 설계하였다. 실제 제주실증단지의 가옥에서 시험한 결과, 정상 동작하는 것을 확인할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2011-2012
• /
• 2011

본 논문은 댁내 전력정보표시장치의 무선 통신을 위한 지그비 모듈의 설계 및 구현에 관한 기술이다. 제작된 지그비 모듈은 크게 전원부, MCU부, 통신 인터페이스부, 안테나 및 RF 매칭회로 등으로 구성되며, MCU로는 32비트 ARM$^{(R)}$ Cortex$^{TM}$-M3 프로세서 기반의 EM357 모듈을 사용하였다. 또한, 댁내 전력정보표시장치가 네트워크상에서 코디네이터 또는 노드 역할을 수행하는 상황을 모두 고려하여 RS-485 통신 인터페이스를 추가 구성하였다. 데이터 송수신 성능 시험 결과 주택 내에서는 5%이하의 PER을 보이며, LOS 상에서 최대 400m까지 통신이 가능함을 확인하였다.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.179-179
• /
• 2018

• TTA Journal
• /
• s.105
• /
• pp.6-11
• /
• 2006

ITU-T SG17 국제표준화 제주회의 유치·개최/ 제6차 한·중·일 IT 표준협력회의 참가/ IT Forum Korea 2006/ IPTV, 차세대PC 신규 프로젝트그룹 본격적 활동/ OMA 표준화 총회 2007년 서울 개최 확정/ 지그비 국제공인 시험서비스 제공/ 대한민국 SW 공모대전 수상작의 GS시험 의무화 추진/ 공공SW 사업자 선정시 GS인증 가산점 기준 도입/ BQB 인정서 수여/

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.525-534
• /
• 2010

A road curbstone is a structure installed at the boundary of the sidewalk and the street with the objectives of road drainage, drawing attention and such. The current general construction method of curbstones places foundation concrete for the curbstones first, waits until the concrete reaches the strength to support the curbstones, places the curbstones on top, and then places the gutter and rear filling concrete. Such method has the issues of poor compaction and weakened bond strength of concrete due to split placing of concrete, and causes the curbstones to easily separate due to vehicle impact or earth pressure, in turn creating maintenance costs and spoiling the aesthetics. To improve such conventional construction methods, an all-in-one method was developed using formwork rail and jig where both the curbstones and gutter can be worked at the same time, and to evaluate the structural performance, static tests of lateral loading test, pullout test, and bending test were executed, and dynamic tests such as pendulum test and actual vehicle impact test were executed. In all tests, the all-in-one construction method using formwork rail and jig was shown to be superior to the conventional construction method by the increase of construction quality and bond strength of concrete.

• Composites Research
• /
• v.23 no.5
• /
• pp.22-29
• /
• 2010

This paper describes the evaluations of tension-compression fatigue characteristics and life for glass fiber/epoxy laminate composite applied to railway bogie to reduce weight. Test samples of tension-compression fatigue were composed of glass fiber/epoxy 4-harness woven laminate composites with different stacking sequence of warp-direction, fill-direction and ${\pm}45^{\circ}$-direction. The tension-compression fatigue test was conducted with stress ratio (R) of -1 and frequency of 5Hz. Goodman diagram were used to evaluate the fatigue characteristics and life of glass fiber/epoxy 4-harness satin woven laminate composite. Anti-buckling jig was designed to prevent buckling of specimen under compression load. The test results showed that the fatigue characteristics of glass fiber/epoxy 4-harness satin woven laminate composite with stacking sequence of warp-direction had a good performance in comparison with that of SM490 used to conventional metal railway bogie.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.37-41
• /
• 2005

풍력을 이용한 풍력발전기의 전력변환 시스템을 개발하기 위해서는 바람의 특성을 정확히 분석하고 이를 대치할 수 있는 모의시험 장치인 시뮬레이터가 필수적이다. 모의시험 장치는 풍향 풍속등의 인자들을 입력받아 회전자 블레이드의 토오크를 전동기가 대신해서 발전기에 공급하게 된다 본 논문에서는 풍력발전 모의시험 장치를 이용하여 750-kW gearless형 풍력발전기의 축소모델인 20-kW 모델 발전기와 고효율의 전력변환 장치 설계 및 인버터 특성을 위한 시험용 지그에서의 시험한 결과를 보이고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.774-783
• /
• 2012

A simple, accurate, secure, long-lasting, and portable hybrid positioning system is proposed and designed in this paper. It consists of a lighting LED that generates visible light data corresponding to position information of a target and a Zigbee wireless network communication module with low power, security, and service area expansion characteristics. Under an indoor environment where there is 23.62m distance between an observer and the target, the presented hybrid positioning system is tested and is verified with the functions of Zigbee three hop wireless networking and visible light communication (VLC) scheme. The test results are analyzed and discussed.