DOI QR코드

DOI QR Code

Performance Evaluation for All-In-One Construction Method of Curbstone and Gutter Using Formwork Rail and Jig

거푸집 레일과 지그를 이용한 경계석 및 측구의 일체형 시공법에 대한 성능평가

  • 최재진 (공주대학교 공과대학 건설환경공학부) ;
  • 고만기 (공주대학교 공과대학 건설환경공학부) ;
  • 김경주 (공주대학교 대학원 건설환경공학과) ;
  • 최경동 (라이브텍(주))
  • Received : 2010.07.14
  • Accepted : 2010.10.12
  • Published : 2010.12.31

Abstract

A road curbstone is a structure installed at the boundary of the sidewalk and the street with the objectives of road drainage, drawing attention and such. The current general construction method of curbstones places foundation concrete for the curbstones first, waits until the concrete reaches the strength to support the curbstones, places the curbstones on top, and then places the gutter and rear filling concrete. Such method has the issues of poor compaction and weakened bond strength of concrete due to split placing of concrete, and causes the curbstones to easily separate due to vehicle impact or earth pressure, in turn creating maintenance costs and spoiling the aesthetics. To improve such conventional construction methods, an all-in-one method was developed using formwork rail and jig where both the curbstones and gutter can be worked at the same time, and to evaluate the structural performance, static tests of lateral loading test, pullout test, and bending test were executed, and dynamic tests such as pendulum test and actual vehicle impact test were executed. In all tests, the all-in-one construction method using formwork rail and jig was shown to be superior to the conventional construction method by the increase of construction quality and bond strength of concrete.

도로 경계석은 보도와 차도의 경계부에 설치하는 구조물로서 노면배수, 시선유도 등의 목적으로 사용된다. 현재 일반적인 경계석의 시공법은 경계석 기초 콘크리트를 타설한 후 콘크리트가 경계석을 지지할 수 있는 강도에 도달할 때까지 기다렸다가 경계석을 거치하고 측구 및 후면 보강콘크리트를 타설하는 공법을 사용하고 있다. 이러한 공법은 콘크리트의 분할 타설에 따른 콘크리트의 다짐 불량 및 부착강도 저하로 경계석이 차량충돌이나 토압 등에 의해 쉽게 분리되어 유지보수 비용발생과 미관을 저해하고 있다. 이러한 재래식 공법을 개선하고자 경계석과 측구를 동시에 시공할 수 있는 거푸집 레일과 지그를 이용한 일체형 시공법을 제안하였으며, 구조적 성능을 평가하기 위하여 횡 방향 재하시험, 인발 시험, 휨 시험과 같은 정적 시험을 실시하였고, 펜들럼 시험 및 실물차량 충돌 시험과 같은 동적 시험을 통한 성능평가를 실시하였다. 검토 결과 거푸집 레일과 지그를 이용한 일체형 시공법은 재래식 공법에 비해 콘크리트의 시공품질이 개선되고 부착강도가 증가하여 모든 시험에서 우수한 것으로 나타났다.

Keywords

References

  1. 강인석, 최형환, 안재규, 김창학(2006) 친환경적 도로공사 경계석의 시공성 및 경제성 분석 연구. 대한토목학회 정기학술대회 논문집, 대한토목학회, pp. 1072-1075.
  2. 건설교통부(2001) 도로안전시설 설치 및 관리지침-차량방호안전시설 편.
  3. 건설교통부(2001) 차량방호 안전시설 실물충돌시험 업무편람.
  4. 백규호, 신영옥(2006) 경계석과 L형 측구의 간편 시공법 개발. 대한토목학회 논문집, 대한토목학회, 제26권, 제6D호, pp. 962-968.
  5. Ross, H.E. Jr., Sicking, D.L, and Zimmer, R.A. (1993) Recommended Procedures for the Safety Performance Evaluation of Highway Features, NCHRP Report 350, TRB, Washington, D.C.