• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.4
• /
• pp.230-236
• /
• 2006

The objective of this study was to evaluate the effects of the application of compost on the availability of micronutrients in lettuce. Micronutrient contents of manure-based composts containing various other source materials were investigated. Total and extractable contents of micronutrients in the composts were analysed. Pots containing soil of relatively low micronutrient levels were treated with 1,000 and $2,000kg\;10a^{-1}$ of compost and used to grow lettuce plants under greenhouse conditions. Fresh and dry weights of lettuce and micronutrient uptake were determined after harvest. Manure-based composts of various other source materials contained very different amounts of total and extractable micronutrients. Total contents of B, Cu, Fe, Mn, Mo and Zn were in the range of 26-42, 27-160, 4,300-9,500, 290-790, 0-0.5 and $140-420mg\;kg^{-1}$, respectively. The contents of 0.1 N HCl extractable B, Cu, Fe, Mn and Zn were 23-32, 1.3-2.6, <1, 7-32 and 0.5-5% of total content, respectively. Contents of micronutrients extractable in DTPA solution were generally higher than those extractable in 0.1 N HCl. It was found that the fresh and dry matter productions of the plants were significantly higher in the compost treatment of $2,000kg\;10a^{-1}$. Lettuce grown in soil treated 1,000 and $2,000kg\;10a^{-1}$ of manure-based compost contained higher levels of B, Cu, Mo and Zn than lettuce grown without compost application. However, contents of Fe and Mn in lettuce were relatively lower in the compost treatments. In the compost treatments the proportions of micronutrients in soil and plant were all in the optimum ranges and below the toxicity levels. The results obtained allow us to establish that commercial composts could be used as soil amendment for plastic film house crop production with sufficient supply of micronutrients.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.21-30
• /
• 2011

As well known, dowel bars are used to transfer traffic load acting on one edge to another edge of concrete slab in concrete pavement system. The dowel bars widely used in South Korea are round shape steel bar and they shows satisfactory performance under bending stress which is developed by repetitive traffic loading and environment loading. However, they are not invulnerable to erosion that may be caused by moisture from masonry joint or bottom of the pavement system. Especially, the erosion could rapidly progress with saline to prevent frost of snow in winter time. The problem under this circumstance is that the erosion not only drops strength of the steel dower bar but also comes with volume expansion of the steel dowel bar which can reduce load transferring efficiency of the steel dowel bar. To avoid this erosion problem in reasonable expenses, dowers bars with various materials are being developed. Fiber reinforced plastic(FRP) dower that is presented in this paper is suggested as an alternative of the steel dowel bar and it shows competitive resistance against erosion and tensile stress. The FRP dowel bar is developed in tube shape and is filled with high strength no shrinkage. Several slab thickness designs with the FRP dowel bars are performed by evaluating bearing stress between the dowel bar and concrete slab. To calculated the bearing stresses, theoretical formulation and finite element method(FEM) are utilized with material properties measured from laboratory tests. The results show that both FRP tube dowel bars with diameters of 32mm and 40mm satisfy bearing stress requirement for dowel bars. Also, with consideration that lean concrete is typical material to support concrete slab in South Korea, which means low load transfer efficiency and, therefore, low bearing stress, the FRP tube dowel bar can be used as a replacement of round shape steel bar.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.399-407
• /
• 2013

The purpose of this study was to evaluate the physicochemical characteristic of the cooked rice added with glutinous and non-glutinous sorghum. The sorghum cultivars were Sorghum bicolor L. Moench cv. Hwanggeumchal, Nampungchal (glutinous), and Donganme (nonglutinous), and rice cultivar was Ilpum rice. The cooking properties and pasting characteristics of cooking rice adding with sorghum according to varieties and different addition rates evaluated. The cooking properties and pasting characteristics had significant changes with the varieties and different addition rates of sorghum. With increased addition rates of sorghum, the pasting temperature, peak viscosity, trough viscosity, breakdown viscosity, and final viscosity were decreased. With increased addition rates of sorghum, the total polyphenol and flavonoid contents before and after cooked rice were increased. Total polyphenol contents of 30% addition rates before cooking rice with Hwanggeumchal, Nampungchal, and Donganme sorghum were 1,693.30, 1,890.98 and $2,386.11{\mu}g/g$ sample, whereas those after cooking rice with sorghum were 1,189.28, 1,190.42 and $1,397.87{\mu}g/g$ sample, respectively. The high level of DPPH radical scavenging activity before and after cooking rice with sorghum were 126.29 and 70.58 mg TE/100g sample in the Donganme in 30% addition rates. Also, ABTS radical scavenging activity was 135.56 and 83.12 mg TE/100g sample, respectively. The results of this study show that the addition of sorghum can make cooked rice improved antioxidant activity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.383-387
• /
• 2013

This study was carried out to examine whether the leaf size is likely to be used as a selection criterion for large seed genotype in soybean (Glycine. max (L.) Merr.) breeding program. Two hundred twenty nine soybean germplasms which had collected in Korea, United States, China and Japan were used in this experiment. The area of unifoliate leaf, middle leaflet of first trifoliate and third trifoliate leaf ranged from $3.2cm^2$ to $33.8cm^2$, 9.2 to $29.5cm^2$, and 7.2 to $58.9cm^2$, respectively. One hundred seed weight also showed great variation from 2.7 to 39.0 gram. The average leaf area of unifoliate, middle leaflet of first trifoliate and third trifoliate leaf were $15.7cm^2$, $18.1cm^2$ and $32.7cm^2$, respectively, and that of seed average weight was 17.2 gram per one hundred seed. Significantly positive correlations were observed between seed weight and leaf area of unifoliate (r=$0.80^{**}$), first trifoliate (r=$0.75^{**}$) and third trifoliate (r=$0.67^{**}$), respectively. Both the leaf length and leaf width of unifoliate, middle leaflet of first trifoliate and third trifoliate leaf were significantly positively correlated with seed weight and both the correlations of unifoliate were higher than the other leaves. The correlations of leaf width in soybean leaflet were higher than those of leaf length. Leaf length/width (L/W) ratio of upper leaf was higher than that of lower leaf in the leaf size. Both the leaf area and leaf width of unifoliate leaf are the most suitable predictive characteristics of early selection in related to seed weight for soybean breeding program.

• The Korean Journal of Pesticide Science
• /
• v.17 no.3
• /
• pp.145-154
• /
• 2013

Flonicamid was a water-soluble and systemic insecticide. It was applied to control neonicotinod pesticide-resistant cotton aphid in sweet peppers. However, the residue levels of total flonicamid in sweet pepper exported to Japan in 2009 were exceeded the maximum residue limit (MRL). This study was conducted to elucidate residual properties of flonicamid parent compound and its metabolites in sweet peppers. It was carried out to compare the variation of residues in sweet pepper in three different greenhouses for 21 days after 3 times application with 7 days interval. The mean residues were 0.176, 0.152 and 0.108 mg $kg^{-1}$ and the residue levels in sweet pepper among three greenhouses show significant difference. The maximum residue levels were detected 10 days later after last treatments. The overall residue levels were lower than MRL 2.0 mg $kg^{-1}$ (by Korea) and 0.4 mg $kg^{-1}$ (by Japan in 2009 but now revised MRL is 2.0 mg $kg^{-1}$). But the residue level of total flonicamid at the 21th day after 3 times treatment with 7 days interval was 0.429 mg $kg^{-1}$ restricted by the application of double rate than recommended rate. The amounts of metabolites, TFNA, 4-Trifluoro methyl nicotinic acid and TFNG, N-(4-trifluoro methyl nicotinoyl) glycine were increased while flonicamid parent compound was decreased over time. Therefore the longer trial period should be needed for flonicamid in sweet peppers.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.11
• /
• pp.97-106
• /
• 2020

Swelling properties and shear strength behavior of MgO-Sand mixtures with hydration procese of MgO are compared according to different MgO contents (W_MgO/W_Total=0, 30, 50, 70, 100%) in this study. The specimens are prepared by mixing with crushed MgO refractory bricks and silica sand. After hydration, the particle size and the specific gravity of MgO were decreases. Through microstructure observation and X-ray diffraction analysis, it is confirmed that MgO changes from the cubic structure of Periclase to the hexagonal cubic structure of Brucite after hydration. As the MgO content increases, both swelling rate and swelling pressure of the mixtures increase. W_MgO/W_Total=30% specimen shows relatively low swelling pressure and swelling rate because produced Mg(OH)₂ mainly fills the pores between sand particles. However, in the case of MgO more than 50%, swelling pressure and swelling rate increase significantly because Mg(OH)₂ fills the pores of sand particles at first and then either pushes out sand particles or Mg(OH)₂ particles after filling the pores. As a result of the direct shear test, before hydration, the mixtures show a dilative behavior on high MgO contents and a contractive behavior on low MgO contents. However, after hydration, the behavior of all mixtures changes to contractive behavior. The threshold fraction of fine (i.e., Mg(OH)₂) contents of the hydrated MgO-Sand mixtures reveals approximately 60% compared with normalized shear strength.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.415-424
• /
• 2017

The purpose of this study is to investigate the effect of sulfate (${SO_4}^{2-}$) and magnesium ($Mg^{2+}$) ions on sulfate resistance of Alkali-activated materials using Fly ash and Ground granulated blast furnace slag (GGBFS). In this research, 30%, 50% and 100% of GGBFS was replaced by sodium silicate modules ($Ms(SiO_2/Na_2O)$, molar ratio, 1.0, 1.5 and 2.0). In order to investigate the effects of $Mg^{2+}$ and ${SO_4}^{2-}$, compression strength, weight change, lengh expansion of the samples were measured in 10% sodium sulfate ($Na_2SO_4$), 10%, 5% and 2.5% magnesium sulfate ($MgSO_4$), 10% magnesium nitrate ($Mg(NO_3)_2$), 10% [magnesium chloride ($MgCl_2$) + sodium sulfate ($Na_2SO_4$)] and 10% [magnesium nitrate $(Mg(NO_3)_2$ + sodium sulfate ($Na_2SO_4$)] solution, respectively and X-ray diffraction analysis was conducted after each experiment. As a result, when $Mg^{2+}$ and ${SO_4}^{2-}$ coexist, degradation of compressive strength and expansion of the sample were caused by sulfate erosion. It was found that the reaction of $Mg^{2+}$ with Calcium Silicate Hydrate (C-S-H) occurred and $Ca^{2+}$ was produced. Then the Gypsum ($CaSO_4{\cdot}2H_2O$) was formed due to reaction between $Ca^{2+}$ and ${SO_4}^{2-}$, and also Magnesium hydroxide ($Mg(OH)_2$, Brucite) was produced by the reaction between $Mg^{2+}$ and $OH^-$.

• Journal of Animal Environmental Science
• /
• v.10 no.2
• /
• pp.87-92
• /
• 2004

This research was carried out to investigate the effects of ozone and anion treatments in improving the quality of the drinking water far livestock. The drinking water was treated with an ozone concentration of 0.658 $\~$0.722 g/h and with anion of 3.27 $\~$ 6.17$\times$1,000,000 pieces/sec. With the ozone and anion treatments, the pH was significantly increased from a range of pH 6.38 $\~$ 7.14 to a range of pH 7.5 $\~$ 7.8(P<0.05). Also, with the ozone and anion treatments, the dissolved oxygen (DO) concentration in the drinking water was increased from a range of 2.0 $\~$ 3.5 mg/$\iota$ to 5.5 $\~$ 6.1 mg/$\iota$(P<0.05): the DO decreased in the control. The dissolved ozone was not increased in the beginning of the experiment, but was increased by 0.48$\~$0.56 mg/L after 48 h of the ozone and anion treatment. The colony numbers of Staphylococcus aureus, Salmonella enteritis, and Escherichia coli disappeared after one hour of ozone and anion treatment.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.207-214
• /
• 2005

To reduce phosphorus and nitrogen from the swine wastewater, magnesium chloride $(MgCl_2)$ was used as a reaction material for both soluble phosphorus (SP) and ammonia-nitrogen (AN). The initial value of SP content were $471mg/\ell$ far aeration test and $515 mg/\ell$ for NaOH addition test, but treatment of $MgCl_2$ reduced SP value to $5mg/\ell$ and $4mg/\ell$. The removal efficiency of $MgCl_2$ for SP showed $99\%$ in both treatment, and the removal efficiency of $MgCl_2$ for AN showed $15\%$ with treatment of aeration and $18\%$ with NaOH. All the experiments were done in a low temperature of 6 to $8^{\circ}C$, suggesting that this methods are possibly able to apply to a cold weather conditions. Moreover, the struvite crystal structure was identified by electronic microscope, implying that $MgCl_2$ is an effective material for removal of SP from swine wastewater In addition to the increased removal rate of the AN in wastewater, both $MgCl_2$ and $KH_2PO_4$ were added. The SP value was reduced by $99\%$ with 2g addition of the phosphate. The SP removal rate by 4g addition of the phosphate was increased only as $15-19\%$, but the quantity of removed SP was higher than that of 2g addition test. The value of AN was not reduced as expected by adding $KH_2PO_4$. The AN removal rate were low as $18\%$ and $15\%$ like as the level of the former test with $MgCl_2$ alone. Therefore, it is needed to examine closely the reaction mechanism f3r reducing both SP and AN simultaneously.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.337-348
• /
• 2005

Jurassic granite from Pocheon area were tested to investigate the effect of microcracks on mechanical properties of the granite. Three oriented core specimens were used for uniaxial compressive tests and each core specimen are perpendicular to the axes'R'(rift plane),'c'(grain plane) and'H'(hardway plane), respectively Among vacious elastic constants, the variation of Poisson's ratio as function of the directions was examined. From the related chart between ratio of failure strength and Poisson's ratio, H-specimen shows the highest range in Poisson's ratio and Poisson's ratio decreases in the order of C-specimen and R-specimen. The curve pattern is nearly linear in stage $I\simIII$ but the slope increases abruptly in stage H-3. As shown in the related chart, diverging point of a curve is formed when ratio of failure strength is $0.92\sim0.96$ Stage IV -3 is out of elastic region. The behaviour of rock in the four fracturing stages was analyzed in term of the stress-volumetric strain me. From the stress increment-volumetric strain equations governing the behaviour of rock, characteristic material constants, a, n, Q, m and $\varepsilon_v^{mcf}$, were determined. Among these, inherent microcrack porosity$(a, 10^{-3})$ and compaction exponent(n) in the microcrack closure region(stage I ) show an order of $a^R(3.82)>a^G(3.38)>a^H(2.32)\;and\;n^R(3.69)>n^G(2.79)>n^H(1.99)4, respectively. Especially, critical volumetric microcrack strain($\varepsilon_v^{mcf}$) in the stage W is highest in the H-specimen, normal to the hardway plane. These results indicate a strong correlation between two major sets of microcracks and mechanical properties such as Poisson's ratio and material constants. Correlation of strength anisotropy with microcrack orientation can have important application in rock fracture studies.