• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.15-19
• /
• 2002

기존 형상의 미세 가열기를 이용한 마이크로 시스템 패키징의 문제점을 해결하기 위해 새로운 형상의 미세 가열기를 제작하여 패키징 실험을 실시하였다. 기존 형상의 미세 가열기와 새로운 미세 가열기의 형상을 각각 제작하여 접합시에 미세 가열기에 발생하는 열분포를 IR 카메라를 이용하여 실험하였다. 기존 형상의 미세 가열기가 불균일하게 가열되는 반면, 새로운 형상의 미세 가열기는 매우 균일하게 가열되는 형상을 나타내었다. IR 카메라 실험을 바탕으로 접합 실험을 실시하였다. 접합 실험시 사용한 미세 가열기는 폭 50$\mu\textrm{m}$, 두께 2$\mu\textrm{m}$로 제작하였으며, 0.2 Mpa의 압력을 Pyrex glass cap에 가한 상태에서 150 mA의 전류를 공급함으로서 접합을 완료하였다. 접합이 완료된 시편들에 대해서 IPA를 통한 leakage 실험을 실시하였으며, 기존 형상의 미세 가열기를 이용한 시편들은 66%가 테스트를 통과한 반면 새로운 형상의 미세 가열기를 이용한 시편들은 85% 이상이 테스트를 통과하였다. Leakage 실험을 통과한 각각의 시편들에 대해서 접합력 측정을 실시한 결과, 기존 형상의 미세 가열기를 이용한 시편들은 15~21 Mpa의 접합력을 나타내었고, 새로운 형상의 미세 가열기를 이용한 시편들은 25~30 Mpa의 우수한 접합력을 나타내었다.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.57-59
• /
• 2002

기존에 연구된 미세 가열기를 이용한 마이크로 시스템 패키징의 문제점을 해결하기 위해 새로운 미세 가열기를 제작하여 접합 실험을 실시하였다. 기존 형상의 미세 가열기와 새로운 미세 가열기의 형상을 각각 제작하여 접합시 미세 가열기에 발생하는 열분포를 IR 카메라를 이용하여 실험하였으며, 기존 형상의 미세 가열기가 불균일하게 가열되는 반면, 새로운 형상의 미세 가열기는 매우 균일하게 가열되는 형상을 나타내었다. 카메라 실험 결과를 바탕으로 접합 실험을 실시하기 위해서 폭 $50{\mu}m$, 두께 $2{\mu}m$의 미세 가열기를 제작하였으며, 0.2 Mpa의 압력을 Pyrex glass cap에 가한 상태에서 150 mA의 전류를 공급함으로서 접합을 완료하였다. 접합이 완료된 시편들에 대해서 IPA를 통한 leak 실험을 실시하였으며, 기존 형상의 미세 가열기를 이용한 시편들은 66%가 테스트를 통과한 반면 새로운 형상의 미세 가열기를 이용한 시편들은 85%이상이 테스트를 통과하였다. Leak 실험을 통과한 각각의 시편들에 대해서 접합력 측정을 실시한 결과, 기존 형상의 미세 가열기를 이용한 시편들은 $15{\sim}21$ Mpa의 접합력을 나타내었고, 새로울 형상의 미세 가열기를 이용한 시편들은 $25{\mu}30$ Mpa의 우수한 접합력을 나타내었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1007-1012
• /
• 2017

In this study, we performed the deployment test of shape memory polymer specimens for space antenna design. Poly(cyclootene) was cross-linked by dicumyl peroxide to make a PCO shape memory polymer. A miniature specimen with 120 mm diameter for a deployable antenna was fabricated with the PCO shape memory polymer. To investigate the deployment performance, the folded specimen as a temporary shape was heated by two heaters to the $15^{\circ}C$ higher temperature than the glass transition temperature of shape memory polymer. Firstly, the specimen was installed horizontally and tested. The deploying motion was captured by a digital camera and analyzed by a Tracker program. To reduce the effects of gravity, the specimen was installed vertically and tested again. The deployment performance of a shape memory polymer was investigated by comparing the results of horizontal and vertical installation tests.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.117-125
• /
• 1997

상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1587-1592
• /
• 2010

The effects of specimen geometry and loading conditions on the stress distribution in a sandwich specimen under combined loads are investigated by elastic finite element analysis. A commercial software NASTRAN is used in plain-strain two-dimensional finite element analysis of sandwich specimens; the analysis was performed for three different specimen shape factors and four different combined displacement conditions. The results of computational analysis suggest that the effect of the combined displacement angle, which is defined as the ratio of the shear displacement to the normal displacement, on the size of the non-homogeneous stress distribution is observed only in the case of the shear stress and von Mises stress. Also as the combined displacement angle increases, the size of the nonhomogeneous stress distribution decreases in the case of the shear stress and increases in the case of the von Mises stress. In addition, as the specimen shape factor, which is defined as the ratio of the specimen length to the height, increases, the size of the non-homogeneous stress distribution under combined displacement conditions decreases significantly.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.1-5
• /
• 2003

In this project, the efficiency of localized heating for micro systems packaging is developed by using a forced potential scheme microheater. Less than 0.2 Mpa contact pressure was used for bonding with a 200 mA current input for $50{\mu}m$ width, $2{\mu}m$ height and $8mm{\times}8mm$, $5mm{\times}5mm$, $3mm{\times}3mm$ sized phosphorus-doped poly-silicon microheater. The temperature can be raised at the bonding region to $800^{\circ}C$, and it was enough to achieve a strong and reliable bonding in 3 minutes. The IR camera test results show improved uniformity in heat distribution compared with conventional microheaters. For performing the gross leak check, IPA (Isopropanol Alcohol) was used. Since IPA has better wetability than water, it can easily penetrate small openings, and is more suitable for conducting a gross leak check. The pass ratio of bonded dies was 67%, for conventional localized heating, and 85% for our newly developed FP scheme. The bonding strength was more than 25Mpa for FP scheme packaging, which shows that FP scheme can be a good candidate for micro-scale hermetic packaging.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.4
• /
• pp.535-540
• /
• 1986

본 연구에서는 소재의 3차원 변형, 즉 평면변형(sidewise spread)과 벌징변형 을 동시에 고려할 수 있는 간단한 동적가용 속도장을 제안하고 이를 클로버(clover) 시편의 업세팅 단조 해석에 적용해보기로 한다. 상계이론에 의한 전체 에너지 소비 율을 최소화시키면서 그때 그때의 높이 감소에 따른 단조 하중과 변형 형상을 구한다. 실험은 SM15C 탄소강을 이용하여 시편의 형상과 윤활조건을 바꿔가면서 상온에서 수행 한다.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.300-305
• /
• 2013

Part shrinkage in injection molding is inevitable phenomenon. Thus, it is necessary not only study on the reducing part shrinkage but characterization of part shrinkage. In this study, part shrinkage in injection molded 2.5 dimensional annular shaped specimens has been studied using glass fiber reinforced PC. Annular shaped specimens were designed with various sizes of outer diameter and thickness. Injection temperature, packing time and packing pressure were selected for operational conditions. Profile variations of outer and inner diameters of molded specimens for various operational conditions were investigated. Sizes of outer and inner diameters of injection molded specimens were smaller than the sizes of mold. Part shrinkage decreased as outer diameter and thickness increased. Part shrinkage showed anisotropic behavior and it depended upon gate location. Subsequently, molded specimens were not circular but oval in shape, and showed the largest shrinkage in the direction of gate. It was realized that the mold design such as gate design is important to control the shape of molded products.

• Composites Research
• /
• v.24 no.3
• /
• pp.12-16
• /
• 2011

High strain rate tensile tests were performed to measure the strain rate sensitivity of fiber reinforced composite material. The composite material was developed for the light weight design of an automotive FEM(front end module) carrier. Standard specimens for quasi-static tests of fiber reinforced composites can be found in ASTM D3039. However, in case of high strain rate tests, it was hard to find standard specimen shapes. In this study, three kinds of tensile specimens designed based on ASTM D638 were investigated to determined the adequate gauge width of tensile specimen for fiber reinforced composite. A drop tower type of high speed tensile apparatus was developed for strain rates of about 15/s and 100/s. Gauge width of 6mm, 8mm and 10mm were investigated. Test results showed the specimen of 8mm width was adequate for the high strain rate tensile tests of fiber reinforced composite. It was found the strength of the composite material increased as the strain rate increased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.7
• /
• pp.455-463
• /
• 2022

As the need for R&D for high reliability cameras, such as satellite cameras, increases, the reliability of the bonding strength properties between an opto-mechanical structure and an optical component has been secured through specimen tests. However, the widely used specimen shape is not suitable for the application of glass and glass-ceramic material, which is fragile, making it difficult to obtain accurate bonding properties due to stress concentration in glass parts before reaching the bonding strength limit. In this study, the stress distribution characteristics in the shear test condition for various specimen shapes were studied analytically, based on the test results of the glass material's own fracture. Through this, the shape characteristics capable of relieving the stress concentration of the glass part were derived, and the range of the bonding shear strength verifiable by the specimen test was improved.