• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.189-194
• /
• 2007

Recently, as consumer's claim fur car safety is increased, quality inspection method fur welding zone is strengthened. Therefore, from the methods that depend on welding zone bead shape size of seat frame in macrography or passive examination, the quality control by whole recording inspection is required. In this study, the system that is measuring automatically if worker checks welding bead fur quality inspection of seat frame is developed using LabVIEW. If the quality standard for the bead width and length of welding zone is inputted, the system measures automatically whether welding zone is bead length or bead width. Measured data is preserved by points and quality recording of welding zone is stored. The car seat きme welding zone is applied and experimented. The results gave good influence o9 the quality control of work efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.161-164
• /
• 2004

본 연구에서는 고휘도 백라이트에 있어서 일반적으로 휘도 향상을 위해서 사용하는 프리즘 혹은 편광프리즘 등의 고가의 기능성 광학시트를 사용하지 않고, 확산시트만을 사용하여 고성능의 BLU 를 제조할 수 있는 핵심부품으로서 프리즘 도광판에 대해서 연구하였다. 고휘도 프리즘 도광판을 구현하는 방법으로 먼저, 광학적으로 시뮬레이션을 통해서 가능성을 검증하고, 기본적인 광학구조의 설계를 수행한 후, 이를 stamper 방식의 사출성형으로 실물을 구현하여 설계의 재현성을 확인하는데 역정을 두었다. 실험결과, 17 inch, 두께 8 mm 사양의 모니터용 도광판에 있어서, 고휘도 BLU를 구현하기 위해서 도광판 밑면과 윗면에 프리즘 구조를 부가한 도광판의 경우에 기존의 인쇄형 도광판보다 약 20%의 휘도향상 효과를 확인할 수 있었으며, 향후 확산시트만을 사용한 고휘도 백라이트로의 응용가능성을 검증할 수 있었다.

• Microbiology and Biotechnology Letters
• /
• v.14 no.4
• /
• pp.285-291
• /
• 1986

Immobilized Candida lipolytica cells were prepared by entrapping the whole cells in calcium alginate gel. To enhance citric acid productivity, immobilized cells were Incubated with activation medium in fluidized-bed reactors. When the activation was done in batch operation, maximum citric acid productivity appeared in a much shorter time than in continuous operation. Activated immobilized cells were enhanced about 10-fold in citric acid production relative to non-activated immobilized cells. The productivity of citric acid was also influenced by bead size. When Immobilized cells were reacted in a fluidized-bed reactor with the same quantity of cells, the citric acid productivity was increased as the bead size was decreased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.187-187
• /
• 2010

현대의 전기전자 기술의 발전속도가 급격히 빨라짐에 따라서 디지털 전자기기는 많은 데이터와 빠른 전송속도가 요구되어지고 있으며 이로 인해 예상치 못한 고주파 노이즈 신호의 문제가 심각해지고 있다. 최근 디지털 전자기기 중 디스플레이 표시장치에서 구동전압 인가 시 발생하는 근역장 방사노이즈가 문제가 되고 있고, 정전용량방식 (Capacitive Overlay)Touch Pannel에서 터치 시 오작동을 일으키는 EL 면광원의 EMI(Electro-Magnetic Interference, 전자방해)가 본 연구에서 해결하고자 하는 문제이다. EL 면광원의 구동전압이 증가함에 따라서 Touch Panel에 인가되는 근역장 방사노이즈의 세기를 측정하였고 근역장 방사노이즈를 감쇄할 수 있는 Flexible한 자성복합시트에 대해서 연구하였다. EL Display Pannel에 Flexible한 자성 복합시트를 채용하여 Flexible Display 장비의 근역장 방사노이즈 감쇄에 효과가 있음을 확인하였다.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.719-725
• /
• 2010

The analysis and experimental program of reinforced concrete (RC) structures for resistance against such extreme loads as earthquake, blast, and impact have been carried by many researchers and designers. Under the extreme loads, a large amount of energy is suddenly exerted to the structure, hence if the structure fails to absorb the impact energy, catastrophic collapse may occur. To prevent catastrophic collapse of structures, reinforced concrete must have adeguate toughness or it needs to be strengthened. The FRP strengthening method and SFRC are studied widely in resistance of impact load because of their high energy absorption capacity. In this study, drop weight impact tests were implemented to evaluate the impact resistance of SFRC and FRP strengthened RC beam while the total steel fiber volume fractions was fixed at 0.75% carbon FRP flexural strengthened RC beams. Futhermore, to prevent the shear-plug cracks when the impact load strikes the beams, additional FRP shear strengthening method are applied. The experimental, results showed that the FRP strengthened RC SFRC beams has high resistance of shear-plug cracks and crack width and SFRC has high resistance of concrete spalling failure compared to normal RC beams. The FRP flexural and shear strengthening RC beams has weakness in the spalling failure because the impact load concentrated the concrete face which is not strengthened with FRP sheets.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.320-326
• /
• 2017

This study is based on the hot air welding application method of EVA sheet to test the tensile strength performance changes due to the hot air welding speed, temperature and chemical attack. For the parameters of the study, the hot air welding method that directly heats the overlap between the sheets and the adhesion surface was controlled, and the maximum temperature for application was set to $20^{\circ}C$, $0^{\circ}C$, $-5^{\circ}C$, $-10^{\circ}C$. According to the results of the testing, the tensile strength of the overlap area was the highest between the temperatures of 20 at 5~6m/min and between the low temperatures at 3~4m/min of hot air welding speed.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.147-153
• /
• 2012

Multi-view 3D displays based on a limited number of pixels have the problem that the stereo-scopic image has a low resolution because of increasing view number. To solve the problem of low resolution, we propose an optical approaching method that focuses the width of a unit pixel by using a commercial spherical shape lenticular lens sheet and increases the effective resolution by increasing the number of sources of light in the multi-view 3D display system based on projection type. The method was performed in such an order that several main derivable parameters were defined, and, through the theoretical and experimental result, the value of the contractible unit pixel width and the scalable effective resolution was derived in a given system environment. As a result, for the case that the ray of light from the projector transmitted the 25 LPI lenticular lens sheet which has the pitch size 1.016 mm, the focused unit pixel width was 0.19 mm and the scalable effective resolution was, at most, 5 times wider than the original one. In addition, the range of depth of focus was 1.496 mm, which shows us the range of thickness tolerances of commercial spherical shape lenticular lens sheet and sufficient optical alignment tolerances.

• Journal of Adhesion and Interface
• /
• v.21 no.3
• /
• pp.93-100
• /
• 2020

3D printing technology enables proper objects to be made through an additive manufacturing method, but resulting in dimension deviation of the product due to contraction phenomenon as cooling melted filament resin injected from high-temperature use environment. In this research, we studied on acrylic adhesives for 3D printer build sheet in order to fabricate high-quality products with a precise shape and to well-mount without distortion. The solvent-free UV-curable acrylic adhesive formulation was designed by adding 4-acryloylmorpholine (ACMO) with high adhesion, toughness, glass transition temperature so that adhesion properties are stable at high temperature and products are easily mounted/detached from the adhesives. The designed formulation was polymerized through two-steps using post-addition of monomers. Using this, the acrylic adhesive was coated to make a film and then analyzed using various experimental techniques. As a result, the fabricated adhesive exhibited high glass transition temperature and there was little gap in peel strength before and after thermal treatment. Moreover, it was confirmed by rheological analysis that this adhesive can provide great bonding/debonding ability without distortion. We demonstrated the fabrication of a rectangular product using a 3D printing method using our acrylic adhesive as a build sheet. Mounting ability and workability were satisfactory and dimension deviation of the product was tiny. Because the product is easily detachable from the acrylic adhesive developed here than conventional build sheets, it is expected that this will provide work convenience to users who use the 3D printer.

• The Journal of the Korea Contents Association
• /
• v.20 no.2
• /
• pp.141-149
• /
• 2020

In this paper, I studied the relation between narrative construction (especially focusing on motif) and humor mechanism based on binge watching environment. Several motif theories such as B. Tomachevski, Horst and Ingrid Dämmrich and S. Chatman are used as a basic study method in chapter II. In popular sitcom , sometimes kernels(according to S. Chatman's term) in certain season's story are changed into satellites(according to S. Chatman's term) in other season's stories. The motif of Ross and Rachel's conflict is a representative example for this switching process. Especially on binge watching environment, as the interval length is much more shortened, viewers tend to reflect their own emotional memory into characters less strongly than segment watching environment. As a result, the possibility 'heavy' stories such as seperation are quickly changed into 'light' humorous matters is increased. This kind of hierarchy variation of repeated motif make the viewers laugh, because they can feel sudden liberating energy by eliminating psychological pressure. It means the characteristics of sitcom's humor on binge watching environment can also be explained by the theory of 'laugh as a eliminating tension', which I. Kant representatively said.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.19-19
• /
• 2012

최근 산업환경 변화에 순응하는 환경 친화적 소재를 사용하여 자동차, 선박, 철도 등 수송용 인테리어 내장재를 구성하는 기술로서, 난연성 및 기계적 물성 유지 기술, 그리고 실내 쾌적감을 부여하기 위한 감성기술 및 심미적 요소를 부여하는 디자인 기술이 가미된 복합 기능화 기술개발이 구되고 있다. 기존의 자동차용 시트 제품은 대부분 PU Foam을 시트원단에 불꽃으로 Lamination 하는 방식으로 제조되었으며, 이러한 제조 방식은 많은 공정을 거치게 되고 PU Foam을 제조하는 공정 및 불꽃으로 Lamination 하는 공정에서 많은 환경유해가스가 발생하는 등 환경적으로도 많은 문제점을 감수하면서 생산하는 방식이다. 또한 각종 원단의 표피재로 많이 사용되고 있는 PU와 PVC의 경우 제조과정에서 용제와 가소제 사용 등으로 인해 환경적으로 많은 문제점이 있으며, 이를 대체하기 위한 노력이 많은 부분에서 이루어지고 있지만, 마땅히 대체할 소재를 찾지 못하고 있는 실정이다. 본 연구에서 제안하는 실리콘수지는 기존의 PU와 PVC를 대체할 수 있는 소재로서 각광받고 있으며, 응용기술 개발을 통해 충분히 적용이 가능한 소재라고 판단된다. 본 연구에서 개발하고자 하는 기술은 난연성을 가진 실리콘 내장 표피재에 불꽃으로 Lamination하는 공정을 배제한 친환경 PUD Foam을 바로 Back Coating함으로써 일체형 고 기능 친환경 제품을 개발함으로써 친환경 복합화 기술 및 SEAT 원단과 표피재의 일체형 모듈화 공법개발을 이루고자 한다.