• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.293-298
• /
• 2007

A new way to integrate various geophysical information for evaluation of RQD was developed. In this study, we does not directly define the RQD value where borehole data are not sampled. Instead, we infer the probability of RQD values with prior probability of data directly obtained from borehole, and secondary supporting probability from resistivity and seismic tomography data. First, we applied the geostatstical indicator kriging to get prior probability of RQD value, and indicator kriging with soft data to get the supporting probability from resistivity and seismic data. And we finally applied the permanence ratio rule to integrate these information. The finally obtained result was also analyzed to fully utilize the probabilistic features. For example, we showed the probability of wrongly classifying the RQD evaluation and vice versa. This kind of analytical result may be used for decision making process based on the geophysical exploration.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.665-673
• /
• 2011

In order to estimate the hydrocarbon reserves, the porosity of the reservoir must be determined. The porosity of the area without a well is generally calculated by extrapolating the porosity logs measured at wells. However, if not only well logs but also seismic data exist on the same site, the more accurate pseudo porosity log can be obtained through artificial neural network technique by extracting the relations between the seismic data and well logs at the site. In this study, we have developed a module which creates pseudo porosity logs by using the polynomial neural network method. In order to obtain more accurate pseudo porosity logs, we selected the seismic attributes which have high correlation values in the correlation analysis between the seismic attributes and the porosity logs. Through the training procedure between selected seismic attributes and well logs, our module produces the correlation weights which can be used to generate the pseudo porosity log in the well free area. To verify the reliability and the applicability of the developed module, we have applied the module to the field data acquired from F3 Block in the North Sea and compared the results to those from the probabilistic neural network method in a commercial program. We could confirm the reliability of our module because both results showed similar trend. Moreover, since the pseudo porosity logs from polynomial neural network method are closer to the true porosity logs at the wells than those from probabilistic method, we concluded that the polynomial neural network method is effective for the data sets with insufficient wells such as F3 Block in the North Sea.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.43-54
• /
• 2005

Care should be taken when performing the P and S wave velocity loggings. Some of them are the effect of casing that is installed to prevent the borehole collapsing when the drilling is done on the loose ground such as soil and/or soft rock, and the discrepancy of the velocities of the same media according to the difference of the source wave frequency spectrum. To overcome these difficulties, the following suggestions are recommended; (1) try a careful drilling technique that can eliminate the necessity of the casing, and (2) apply the logging methods with the proper frequency spectrum that is appropriate to the object of the velocity logging.

• Explosives and Blasting
• /
• v.31 no.2
• /
• pp.40-49
• /
• 2013

To predict ground conditions ahead of the tunnel face, seismic refraction survey has been widely used. But due to the development in seismic equipment and techniques, tomography using borehole and others are actively applied in recent years. This study has a purpose to prevent stability problems during excavation and construction of tunnels by predicting unfavorable ground conditions such as fault, fractured zone and rock quality variation zone ahead of the tunnel face using TSP survey equipment. In this study, the validity of predicting ground conditions ahead of tunnel face by TSP survey has been evaluated through the case study in the road construction site.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.06b
• /
• pp.141-152
• /
• 2003

터널 설계를 위한 조사 있어서, 요사이 시추공 조사는 물론 탄성파 탐사, 전기 비저항 탐사 등의 물리탐사가 빈번히 행해지고 있는 실정이다. 따라서 최적의 지반평가(암반 등급 등)를 위해 조사에서 얻어지는 모든 자료를 체계적으로 최대한 활용할 수 있는 방법이 절실히 요구되고 있다. 많은 연구자들이 정량적 데이터가 부족한 경우에 대처하기 위해 정상적 데이터의 이용을 적극 제안해 왔다. 본 연구에서는 신뢰도가 다른 두 종류의 자료, 즉 시추공자료와 물리탐사 자료를 활용하여 시추가 되지 않은 구간의 암반등급을 추정하는 방법을 지구통계학적 이론에 근거하여 소개하고자 한다.

• The Journal of Engineering Geology
• /
• v.30 no.1
• /
• pp.31-42
• /
• 2020

Electrical resistivity and downhole seismic surveys were conducted together with bore investigations and well-logging to examine subsurface structures in small-scale landslides at Sinjindo-ri, Geunheung-myeon, Taean-gun, Chungcheongnam-do, Republic of Korea in 2014. On the basis of the low N-values at depths of 5~7 m in borehole BH-2, downhole seismic and electrical dipole-dipole resistivity surveys were performed to delineate geological weak zones. The low-resistivity zones (<150 Ω·m) measure ~8 m in thickness and show a close depth correspondence to weathered soils consisting mainly of silty clays as identified from the bore investigations and well-logging data. Compared with weak zones in borehole BH-1, weak zones in BH-2 are characterized by lower densities (1.6~1.8 g/㎤) and resistivities (<150 Ω·m) and greater variation in Poisson's ratio. These observations can be explained by the presence of wet silty clays rich in weathered soil material that have resulted from heavy rainfall and rises in groundwater level. Downslope movements are probably caused by the sliding of wet clay that acts to reduce the strength of the weathered soil.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.29-36
• /
• 2007

Recent seismic surveys have shown that the presence of methane hydrate (MH) in sediments has significant influence on seismic attenuation. I have used vertical seismic profile (VSP) data from a Nankai Trough exploratory well, offshore Tokai in central Japan, to estimate compressional attenuation in MH-bearing sediments at seismic frequencies of 30-110 Hz. The use of two different measurement methods (spectral ratio and centroid frequency shift methods) provides an opportunity to validate the attenuation measurements. The sensitivity of attenuation analyses to different depth intervals, borehole irregularities, and different frequency ranges was also examined to validate the stability of attenuation estimation. I found no significant compressional attenuation in MH-bearing sediments at seismic frequencies. Macroscopically, the peaks of highest attenuation in the seismic frequency range correspond to low-saturation gas zones. In contrast, high compressional attenuation zones in the sonic frequency range (10-20 kHz) are associated with the presence of methane hydrates at the same well locations. Thus, this study demonstrated the frequency-dependence of attenuation in MH-bearing sediments; MH-bearing sediments cause attenuation in the sonic frequency range rather than the seismic frequency range As a possible reason why seismic frequencies in the 30-110 Hz range were not affected in MH-bearing sediments, I point out the effect of thin layering of MH-bearing zones.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.127-135
• /
• 2002

The relationship between the seismic velocity and RQD was estimated using the RQD data obtained from the optical borehole image processing and drill core logs and the seismic velocity measured from the PS logging. The seismic velocity and crack aperture show a high correlation in the granite in Yuseong area and banded gneiss in Paldang area. However, such a relationship cannot be found in the sedimentary rock in Sabuk area. In the sedimentary rock of Sabbuk area, the seismic velocity shows widespread distribution especially in the 0∼20mm range of accumulated crack aperture probably because the wide distribution of fracture zone in coaly shale results in the inaccurate measurements of the crack aperture.

• Tunnel and Underground Space
• /
• v.4 no.3
• /
• pp.250-255
• /
• 1994

복잡한 지하구조인 지하터널과 핵폐기물 저장소 부지조사에 관한 자료해석을 위하여 지오토모그래피를 이용하였다. 지하터널의 조사는 지하저장소, 자원개발 및 군사적인 측면에서 많은 연구와 응용이 요구된다. 본 연구에서는 미육군이 현장에서 얻은 자료를 처리하고 이를 이론모형의 결과와 비교하였다. 또한 핵폐기물 부지 조사는 미국의 핵폐기물 저장소의 후보로 지정된 Yucca Mountain의 지질구조에 대한 이론모형계산을 행하였으며, Jaramillio(1993)가 모형실험치를 image 방법에 의하여 계산한 결과와 비교하였다. 탐사방법으로는 탄성파 시추공-시추공 방법과 VSP 방법을 사용하였다. 지오토모그래피의 기본이론은 터널과 지하공간 제3권 1호(1993)에서 설명되었다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2003.03a
• /
• pp.13-30
• /
• 2003

In this paper, a new systematic method will be introduced, in which a Rock-mass Prediction System(RPS) predicts the geological conditions and rock mass movements before tunnel excavation and the appropriate counter-measures are taken in the expected weak zones during tunnel construction. The Rock-mass Prediction System(RPS) consists of the LIM, a horizontal core drilling and a seismic exploration method(TSP/HSP). In the Rock-mass Prediction System(RPS), the seismic exploration method (TSP/HSP) gives information on the locations of the weak zones such as major faults and voids in wide-range, and the horizontal core drillings are utilized to find exact location and widths of the faults or voids near the weak zones which was predicted by the seismic exploration method (TSP/HSP). The LIM is used to find the hardness of the rock mass and small weak zones near the excavation face. The Rock-mass Prediction System (RPS) was successfully applied to the Sol-An Tunnel and the effectiveness of the system was verified.