• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.62-79
• /
• 2020

The rock-carved seated Avalokiteśvara statue at Ganghwa Bomunsa Temple is a giant rock-carved Buddhist statue that was built in 1928 during the Japanese colonial era. Although it is a year-recorded Buddhist statue that occupies a prominent place in modern Korean Buddhist sculpture history, it has not been the subject of in-depth discussion due to weak research on modern Buddhist sculptures. In this study, to examine the various significant aspects of the rock-carved Seated Avalokiteśvara statue at Bomunsa Temple as a modern Buddhist sculpture, I have managed to determine its construction year, artificers, and patrons by deciphering the inscription around the rock-carved statue; in addition I have researched the effects of the rock shapes and landforms on the formation of the Buddhist statue by comparing and analyzing the points of view of both artificers and worshipers. I have also identified the specific circumstances of the time of construction from interviews with the descendants of artificers. A monk from Geumgangsan Mountain, Lee Hwaeung, took the role of sponsor and chief painter to construct the rock-carved seated Avalokiteśvara statue at Bomunsa temple. In the beginning of its construction in 1928, more than 100 donators jointly sponsored the construction of the statue. Gansong Jeon Hyoungphil sponsored alone at the time of the place of worship's expansion in 1938. Bomunsa Temple has been regarded as one of the top-three sacred places of Avalokiteśvara Bodhisattva together with Naksansa Temple in Yang Yang and Boriam in Nam Hae, due to the construction of the rock-carved statue. It took about three months to construct the statue. Lee Hwaeung drew a rough sketch and then Un Songhag and five masons from Ganghwa Island took part in the carving process. We can observe the line drawing technique around the rock-carved statue because the statue was carved based on the rough sketch of the monk painter. The aspect of Lee Hwaeung as a painter is revealed; therefore, we can identify the clue of painting pattern leading to Seogongchulyou- Hwaunghyoungjin- Ilonghyegag. The rock-carved seated Avalokiteśvara statue at Bomunsa Temple is a typical Avalokiteśvara that wears a jeweled crown and holds Kundica. It makes a strong impression as it has a big square-shaped face and a short neck and is unsophisticated in general. The artificers solved the issue of visual distortion of the rock-carved statue caused by carving on a 10-meter high and 40-degree sloping rock by controlling motion to its maximum, omitting detailed expression by emphasizing symmetry, and adjusting the head-to-body proportion to be almost one-to-one. In this study, especially, I presume the unified form of sacred sculptures and Buddhist altars, without making a Buddhist altar like the rock-carved seated Avalokiteśvara statue at Bomunsa Temple, to be a key characteristic of modern Buddhist sculptures. Furthermore, I make newly clear that the six letters of Sanskrit carved on nimbus, which had been interpreted as a Six-Syllable Mantra, are a combination with Jeongbeopgye and Sabang Mantras. In addition, three iron rings driven on eaves rock were used as a reference point, and after construction they were used as a decoration for the Bodhisattva with hanging wind chimes.

• Radiation Oncology Journal
• /
• v.25 no.4
• /
• pp.227-232
• /
• 2007

Purpose: To investigate the flavopiridol effect on radiation-induced apoptosis and expression of apoptosisrelated genes of human laryngeal and lung cancer cells. Materials and Methods: A human laryngeal cancer cell line, AMC-HN3 and a human lung cancer cell line, NCI-H460, were used in the study. The cells were divided into four groups according to the type of treatment: 1) control groups; 2) cells that were only irradiated; 3) cells treated only with flavopiridol; 4) cells treated with flavopiridol and radiation simultaneously. The cells were irradiated with 10 Gy of X-rays using a 4 MV linear accelerator. Flavopiridol was administered to the media at a concentration of 100 nM for 24 hours. We compared the fraction of apoptotic cells of each group 24 hours after the initiation of treatment. The fraction of apoptotic cells was detected by measurement of the sub-G1 fractions from a flow cytometric analysis. The expression of apoptosis-regulating genes, including cleaved caspase-3, cleaved PARP (poly (ADP-ribose) polymerase), p53, p21, cyclin D1, and phosphorylated Akt (protein kinase B) were analyzed by Western blotting. Results: The sub-G1 fraction of cells was significantly increased in the combination treatment group, as compared to cells exposed to radiation alone or flavopiridol alone. Western blotting also showed an increased expression of cleaved caspase-3 and cleaved PARP expression in cells of the combination treatment group, as compared with cells exposed to radiation alone or flavopiridol alone. Treatment with flavopiridol down regulated cyclin 01 expression of both cell lines but its effect on p53 and p21 expression was different according to each individual cell line. Flavopiridol did not affect the expression of phophorylated Akt in both cell lines. Conclusion: Treatment with flavopiridol increased radiation-induced apoptosis of both the human laryngeal and lung cancer cell lines. Flavopiridol effects on p53 and p21 expression were different according to the individual cell line and it did not affect Akt activation of both cell lines.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.60-72
• /
• 2016

This study aims to suggest strategies of development and management for large parks by examining experimental cases of park governance models related to a shift away from public administration. The shifts towards governance as well as public-private partnership in city parks have involved the need for new public management. This study has analyzed two exemplary cases of Presidio Park and Sydney Harbour National Park in the aspects of planning process and management strategies, as the results derived the meaning and effect of park governance management and is also an essential prerequisite for the achievement of the model. There are six dimensions of research frames--namely policy, governance, partnership, finances and funds, design and maintenance-management, and evaluation-monitoring-taken as the basis for this study. Through the analysis, several key characteristics of these cases were elicited. First, the park planning process must be consistent in carrying a policy from planning to implementation, and furthermore, an independent operation body which can properly authorize an execution and uphold its responsibility from the public could serve in adaptable park services. Second, it has been suggested to build various partnerships with PAs and NGOs, private corporations, community groups, and academic institutes that allow it to expand the diversity of the park activities. Third, there has been experimental exploration to achieve a financially self-sufficient model by establishing internal revenue models and hence allow the reduction of reliance on public finances. The result of this type of park management would allow for improving park quality and make the park space a vital part of the local economy. Fourth, the strategies for a local community's participation are needed to allow the community to become a producer as well as a consumer. This study shows that the direction and significance of the park governance model regarding the fact that the plans sought by the two parks are extending the layout of public-centered discussion to the private sector and the third non-governmental sector including to the local community group. This shows both implications and limitations, such as the risk of privatization through non-governmental activities at the park or the violation of essential functions as a public good due to a profit-generating management policy for securing financial self-sufficiency. At the current point in which plans are under way for the development and management of large parks, a park governance model requires continuous study and expansion of discussion in the future.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.652-659
• /
• 2015

The aim of this study was to provide nutrition information to consumers by analyzing crude fat, saturated and trans fatty acids in commercial retort foods (n=70). The following sauce products of curries (n=21) and black-bean-sauces (n=16), other sauces (n=17) and instant cooking foods (n=16) were collected. Crude fat contents were quantified with the Rose-Gottlieb method using acid digestion. While saturated and trans fatty acids were examined by gas chromatography with a flame ionization detector (FID). Crude fat, saturated and trans fatty acid content ranges were $0.47{\pm}0.42{\sim}12.80{\pm}0.07g/100g$, $0.24{\pm}0.02{\sim}17.41{\pm}0.41g/100g$, $0.00{\pm}0.00{\sim}0.46{\pm}0.05g/100g$, respectively. Maximum recovery of analysis values was crude fat (119.7%), saturated fat (119%) and trans fatty acid (90%) compared the actual amounts based on the reference value indicated on the nutrition label. The analyzed samples were found to be compliant with nutrition label standard, because the contents of crude fat, saturated fatty acid, trans fatty acid were less than 120% of the reference value indicated on the nutrition label in retort foods. Therefore, the nutrition information on retort foods available to consumers was found to be trustworthy.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.609-614
• /
• 2013

This study investigated the spontaneous combustion behavior of solvent-treated low rank coals. Indonesian lignite (a KBB and SM coal) and sub-bituminous (a Roto coal) were mixed with non-polar 1-methyl naphthalene (1MN) either by mechanical agitation or ultrasonication. The property change associated with 1MN treatment was then analyzed using proximate analysis, calorific value analysis, Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy and moisture re-adsorption test. Susceptibility to spontaneous combustion was evaluated using crossingpoint temperature (CPT) measurement along with gas analysis by GC. A FT-IR profile showed that oxygen functional groups and C-H bonding became weaker when treated by 1 MN. XPS results also indicated a decrease of the oxygen groups (C-O-, C=O and COO-). Increased hydrophobicity was found in the 1MN treated coals during moisture readsorption test. A CPT of the treated coals was ${\sim}20^{\circ}C$ higher than that of the corresponding raw coals and the ultrasonication was more effective way to enhance the stability against spontaneous combustion than the agitation. In the gas analysis less CO and $CO_2$ were emitted from 1MN treated coals, also indicating inhibition of pyrophoric behavior. The surface functional groups participating in the oxidation reaction seemed to be removed by the ultrasonication more effectively than by the simple mechanical agitation.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.303-312
• /
• 2018

This study was conducted to investigate the relationship between the decrease of forest biomass by forest thinning and the change of temperature in the natural forest by measuring forest biomass and temperature before and after forest thinning in the Pusan National University forest where afforestation had been carried out. We intended to investigate the relationship between the forest biomass, estimated by calculating the Basal area, Crown area and Crown volume using the same formula to the same quadrat before and after forest thinning, and the forest temperature. Temperature measurement was carried out on April 20, 2016 through 28 before forest thinning, July 26, 2016 through November 4 around the time of forest thinning, and April 15, 2017 through May 8 after forest thinning. A temperature data logger was installed to point north at the height of 2.0 m above the ground in the center of the quadrat to record data every 10 minutes during the measurement periods. We used the AWS (Automatic Weather Station) data of the Dongnae-gu area located in the nearby city because it was difficult to set the control group since the whole forest was the subject to the forest thinning. The analysis of the relationship between forest biomass change and temperature showed that the change in temperature inside the forest was the greatest in the midday (12:00 - 15: 00) and was highly correlated with the Crown volume in the forest biomass. The temperature increase was much larger (average $1.91^{\circ}C$) 1 year after forest thinning than immediately after forest thinning (average $0.74^{\circ}C$). The comparison of the decrease rate of Crown volume and the increase in temperature showed that the Pitch pine community, which showed the highest decrease of Crown volume by 15.4%, recorded the highest temperature rise of $1.06^{\circ}C$ immediately after forest thinning and $2.49^{\circ}C$ 1 year after forest thinning. The Pitch pine-Korean red pine community, which showed the lowest Crown volume reduction rates with 5.0%, recorded no significant difference immediately after forest thinning but a temperature rise of $0.92^{\circ}C$ 1 year after forest thinning. The results confirmed that the decrease of forest biomass caused by forest thinning led to a rapid increase of the internal temperature. The fact that the temperature increase was more severe after 1 year than immediately after forest thinning confirmed that the microclimate changes due to the removed biomass cannot be recovered in a short time.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.55-61
• /
• 2009

Recently, the number of high-rise buildings being built in Korea by major construction companies for residential and commercial use has been increasing. When constructing a high-rise building, it is necessary to apply massive amounts of concrete to form a mat foundation that can withstand the huge load of the upper structure. However, it is of increasing concern that due to limitations in terms of the amount of placing equipment, available job-sites and systems for mass concrete placement in the construction field, it is not always possible to place a great quantity of concrete simultaneously in a large-scale mat foundation, and for this reason consistency between placement lift cannot be secured. In addition, a mat foundation Is likely to crack due to the stress caused by differences inhydration heat generation time. To derive a solution for these problems, this study provides test results of a hydration heat crack reduction method by applying placement lift change and setting time control with a super retarding agent for mass concrete in a large-scale mat foundation. Mock-up specimens with different mixtures and placement liftswere prepared at the job-site of a newly-constructed high-rise building. The test results show that slump flow of concrete before and after adding the super retarding agent somewhat Increases as the target retarding time gets longer, while the air content shows no great difference. The setting time was observed to be retarded as the target retarding time gets longer. As the target retarding time gets longer, compressive strength appears to be decreased at an early stage, but as time goes by, compressive strength gets higher, and the compressive strength at 28 days becomes equal or higher to that of plain concrete without a super retarding agent. For the effect of placement lift change and super retarding agent on the reduction of hydration heat, the application of 2 and 4 placement lifts and a super retarding agent makes it possible to secure consistency and reduce temperature difference between placement lifts, while also extending the time to reach peak temperature. This implies that the possibility of thermal crack induced by hydration heat is reduced. The best results are shown in the case of applying 4 placement lifts.

• Journal of Genetic Medicine
• /
• v.8 no.2
• /
• pp.105-112
• /
• 2011

Purpose: Sharing genetic information with family members is important for cancer awareness and prevention. The purpose of this study is to examine disclosure patterns of positive BRCA genetic test results to patients' relatives. Materials and Methods: A total of 106 probands who had positive BRCA genetic test results from the Korean Hereditary Breast Cancer Study participated in our study. Subjects were asked whether they had disclosed their genetic test results to first-, second-, and third-degree relatives. Univariate and multivariate analyses were used to identify factors associated with positive result sharing with close and distant relatives. Results: In total, 99 respondents (93.4%) informed at least one at-risk relative of the test result, and they all reported that they had disclosed their genetic test result to a first-degree relative. Communication of test results to other relatives occurred significantly less often, with only 31 of 99 subjects (31.3%) sharing their results with second- or third-degree relatives. In the results of univariate analyses, disclosure of genetic test results to more distant relatives was associated with marital status and months since post-test counseling. The reasons for communication were to provide information about the BRCArelated cancer risk and to recommend the genetic test. Conclusion: Most individuals with the BRCA mutation share their test results with first-degree family members; however, these results reach more distant relatives significantly less often. Therefore, it is necessary to encourage patients' communication with extended family members through systematic genetic counseling.

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.2
• /
• pp.217-232
• /
• 2016

In line with the emphasis on the importance of nature of science recently, this paper examines the degree and level at which the 2009-revised convergence science textbook, developed from the common science under the 7th curriculum in South Korea, reflected nature of science according to the development of curriculum. 'Nature of science' was classified according to scientific view - which represents scientists' view - and naive view - which represents general thinking and scientific error concepts. Also, 'Nature of science' was classified according to the explicit method and implicit method in terms of teaching method. The level of nature of science was defined using the four occasions of scientific view, naive view, explicit teaching and implicit teaching. In order to identify the components and level of nature of science reflected in the textbook, using the 10 items which refer to Lederman(2001)'s 7 definitions, NOSAT (Nature of Science Analyzing Tool) was developed and used. The results are that, since the educational curriculum is changed from common science under 7th curriculum to 2009-revised convergence science, the degree of reflection was rather a withdrawal. On parts of theories of 7th common science curriculum except research parts, it was difficult to find explicit nature of science. Also on 2009-revised curriculum, nature of science, which is seen on 2007 curriculum, disappeared. It is suggested that the future curriculum emphasizes the importance of nature of science, and bolster the reflection of nature of science according to the changing curriculum. Nature of science should not be expressed limitedly, but instead, should be more positively reflected, and the reflection method should be not implicit but explicit, allowing direct teaching. Towards that end, writers of the textbook should have an accurate understanding of nature of science. And, for the right teaching, teachers' capabilities are important and it is necessary to train teachers to understand and act for nature of science.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.