• Journal of the Korean Institute of Gas
• /
• v.23 no.5
• /
• pp.8-14
• /
• 2019

Although the rate of city gas supply in South Korea has grown significantly, the fields related to gas meters have not yet escaped from the initial method of service (e.g. measurement, safety checks, billing, etc). As smart gas meters are actively developed and researched, the introduction of smart gas meters requires rational performance evaluation methods and standards to verify reliability and safety. The purpose of this paper is to make a prototype of the performance evaluation to test the performance of the smart gas meter and to derive the performance evaluation method by conducting the demonstration operation so that the smart gas meter can be smoothly distributed in South Korea.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.276-281
• /
• 2002

본 연구에서는 정밀 쇄미 선별 시스템을 개발하기 위하여 원통형 홈 쇄미 선별기의 시작품을 제작하고 이것의 설계인자와 운전인자에 따른 성능 분석을 수행한 결과는 다음과 같다. 1. 원통형 홈 쇄미 선별기의 시작품은 홈의 직경이 작은 선별원통을 상단에, 홈의 직경이 큰 선별원통을 하단에 장착하는 2단형으로 설계 제작하였다. 각 단의 trough에는 스크류 컨베이어를 설치하였으며, 원통의 회전 속도와 trough의 각도 및 원통의 수평각을 변경시킬 수 있도록 하였다. 홈의 크기가 작은 상단에서 쇄미를, 홈의 크기가 큰 하단에서 준완전립을 선별하도록 하였다. 2. 원통형 홈 쇄미 선별기의 원통 회전속도가 증가하면 처리 용량이 증가하며, 이 속도에 따른 최적의 trough 각이 존재하는데, 본 실험에서는 회전 속도 35rpm에서 trough 각 37$^{\circ}$, 45rpm에서 55$^{\circ}$, 55rpm에서 73$^{\circ}$로 분석되었다. 3. 원통형 홈 쇄미 선별기의 공급율이 증가할수록 선별효율과 수거율(준완전립+쇄미)은 급격히 감소하지만, 순도(준완전립+쇄미)는 완만히 증가하였고, 완전립의 수거율과 순도는 95%이상을 유지하며 일정한 경향을 보였다. 본 실험 범위에서는 원통형 홈 쇄미선별기의 선별효율은 각 공급율에서 공히 원통의 분당 회전수 35rpm, trough 각 37$^{\circ}$에서 최대치를 나타내었다. 이 최적 조건에서 공급을 400-800kg/h 범위의 선별효율 평균치는 70% 정도로 분석되었다.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.1
• /
• pp.149-156
• /
• 2019

Mixed reality technology (MR) has become one of the fourth industrial revolution element technologies. MR technology has been widely applied not only as a digital contents industry but also in the fields of architecture, tourism, medical field, and education. In this paper, we propose a collaborative service platform for architectural applications that inter-operate with heterogeneous devices such as MR device, PC and mobile, and develop prototype system and verify it. As a result, the 3D model using the skp extension, which is mainly used in architecture design office, was created by using developed prototype system and generate the MR contents for the hololens, which is the MR device, and the conversion time and normal operation were confirmed.

• Journal of Korea Technology Innovation Society
• /
• v.3 no.1
• /
• pp.22-36
• /
• 2000

본 연구에서는 신제품의 경제성 분석에 있어 기존연구의 분리된 방법론을 통합한 새로운 모델의 수립에 의의가 있다. 필자가 제시하고 있는 신제품의 전주기 경제성 분석모델은 신제품의 연구시작 단계에서부터 시제품 생산, 공장가동 생산판매 공익적 가치분석, 소비자 행태분석 단계까지를 통합하고 있다 본 모델에서는 기존의 경제학, 경여학, 산업공학에서 개별적으로 분리되어 사용되어 온 경제성 분석의 방법론을 수요자 중심으로 통합함으로써 분석의 객관성과 구체적 적용성을 높였으며 또한 각 분석단계마다 연구사례를 제시하여 독자의 이해와 활용성을 제고시켰다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.364-368
• /
• 1999

We investigate the evaluation items of LSU (Laser Scanning Unit), such as beam size, f$\theta$ characteristics, linearity, skew and bow, optical power ratio between image height of 0mm and $\pm$108 mm, pitch error, Jitter and shift of printing position. Through the measurement of LSU using BSH (Beam Scan Head) installed on LMC (Linear Motion Controller) which moves linearly within the whole scanning range (-108 mm~+108 mm), we can ascertain plastic f$\theta$ lenses, which are manufactured by TVLP (Two-step Variable Low Pressure) molding method, to satisfy 600DPI(Dots Per Inch) performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.767-770
• /
• 2000

In order to reduce lean-time and cost, recently the technology of Rapid Prototyping and Manufacturing(PR/M) has been used widely. So various RP/M methods have been developed and these systems commercialized several years ago. The machining process is one of these methods. It also offers advantages such as precision and versatility. But there are some considerations during machining. The most important problem among them is the fixturing. So we have to overcome the limitation because the fixturing time is depend on the complexity of geometry to be machined. In this paper, we have developed the fixturing technique using filling process that can be widely useful for rapid products within a short time. So we have carried out some kinds of rapid products such as plastic knob and metal fan using our fixturing process. In fixturing step, the filling material might chosen a resin or a alloy according to wether the work material is plastic or metal respectively. Also we developed the set-up equipment attachable on the table of the milling machine that provided practicable quality during a series of machining operations, named by two step milling process.

• Journal of the KSME
• /
• v.18 no.1
• /
• pp.8-14
• /
• 1978

여기에선, M.F.Spotts가 사용한 생산비식을 써서, 현재 KIST 정밀기계기술센터에서 시작개발 하고있는 평면연삭기의 상기 문제점에 응용해 보기로 했다. 즉, 평면연삭기의 최종정밀도에 관련 된 문제를 제기하고 그에 필요한 식을 유도한 후, 그것의 각 부품치수가 어떻나 공차 범위내에 들면 최종정밀도를 만족시키고 또한 가공비를 감소시킬 수 있는가 하는 문제의 해결을 시도해 보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.270-276
• /
• 2020

3D printing is an additive manufacturing technology that can produce complex shapes in a single process for a range of materials, such as polymers, ceramics, and metals. Recent 3D printing technology has developed to a level that enables the mass-production through an improvement of the printing speed and the continuous development of applicable materials. In this study, 3D printing technology using a laser was applied to manufacture a heat exchanger for an air compressor in a railway vehicle. First, the optimal design of the heat exchanger was carried out by focusing on weight reduction and compactness as a shape suitable for 3D printing. Based on the design derived, heat exchanger prototypes were made of AlSi10Mg alloy material by applying the SLM technique. Moreover, the manufactured prototypes were attached to an existing air compressor, and the heat exchange performance of the compressed air was tested. The test results of the 3D printed prototypes showed a heat exchange performance of approximately 80% and 85% at low and high-pressure, respectively, compared to the existing heat exchanger. From the 𝓔-NTU method results with an external cooling air condition similar to that of the existing heat exchanger, the calculated heat transfer amount of 3D printed parts showed similar performance compared to the existing heat exchanger. As a result, the 3D printed heat exchanger is lightweight with good performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.275-282
• /
• 2018

Mountain trams are an environmental-friendly transportation system that run wirelessly on an embedded track constructed on previous mountain roads, and can run despite the frozen road. On the other hand, there is some difficulty on sharp and steep tracks. In this study, after possible technical problems were defined in mountain trams running on a sharp and steep track, the design solutions for the interface structure of bogie and carbody were proposed. In addition, a prototype was made and its performance was tested to verify the solutions. Because the difference in the distance of the inner and outer rails on a sharp curve is severe enough to interrupt running, independent rotating wheels with different angular speeds were developed and applied. To prevent derailment due to the large attack angle and lateral force caused by the previous vehicle of 2bogie-and-1carbody on the sharp curve, a vehicle with 1bogie-and-1carbody was designed and applied. A prototype vehicle of 1bogie-and-1carbody with independent rotating wheels was made to improve the performance during the test running on a small track. A coupler was designed to absorb the large rotations of 3 degrees-of-freedom between the carbodies of a mountain tram running on the steep curved track. After a small scale prototype was made, the performance was verified by a function test.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.1-5
• /
• 2015

The C-band compact linear accelerator (linac) is being developed at Dongnam Institute of radiological & Medical Sciences (DIRAMS) for medical and industrial applications. This paper was focused on the output measurement of the electron beam generated from the prototype electron linac. The dose rate was measured in unit of cGy/min per unit pulse frequency according to the IAEA TRS-398 protocol. Exradin-A10 Markus type plane parallel chamber used for the measurement was calibrated in terms of dose to water at the reference depth in water. The beam quality index ($R_{50}$) was determined by the radiochromic film with a solid water phantom approximately due to low energy electrons. As a result, the determined electron beam output was $17.0cGy/(min{\cdot}Hz$. The results were used to monitor the accelerator performance during the development procedure.