• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.73-74
• /
• 2005

Shipping company and operators have to manage well to keep shipping schedules without problems in main engine. Specially operators have to operate main engine within the limit of operation point, and adjust related parameters to be operated safely and continuously. Also operators have ability to analyze fouling condition of hull through comparing data gotten from P-V curve and performance results of new building ships in trial with service ships. In this study, not only compared main engine performance results in shop trial and sea trial, but also investigated performance trend in accordance with the time elapsed for the service ship's diesel engine. They were confirmed as follows. First, shop trial load is higher than sea trial load but ship's speed is satisfied with owner's contract speed. Second as time goes by, load of service ship increases steadily and other parameters related with main engine shows variable change depend on main engine load increasing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.212-217
• /
• 2004

In general, the braking system of high speed train has an important role for the safety of the train. To stop safely train at its pre-decided position, it is necessary to combine properly the various brakes. The prototype of Korean high speed train (KHST) has been designed, fabricated and tested by the domestic researchers. It has adopted a combined electrical brakes, such as rheostatic brake, regenerative brake and eddy current brake, and mechanical brakes composed of disc brake, wheel disc brake and tread brake. In this paper, the performances and control algorithms of braking system have been reviewed by the experimental method.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.85-95
• /
• 1997

The design work for the next generation of 300 passenger super high - speed foil catamaran ship has been performed in this study utilizing the accumulated technology and the acquired know - how. The study has been so successfully completed that the performance characteristics confirmed by the model tests are much superior to those of the design target. The construction and the sea trial of the super high - speed foil catamaran passenger ship designed in this study has been completed already. It is the authors' plan to present the sea trial results in the near future.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.157-160
• /
• 2008

본 연구에서는 디스크 이동식 폐타이어 열분해 실증 설비(10톤/일)를 설계, 제작 그리고 시운전을 통하여 열분해 설비의 안정적인 연속 운전이 가능함을 확인하였다. 시운전 결과 반응기 내부 온도는 $500{\sim}600^{\circ}C$, 내부 압력은 $-80{\sim}-100mmHg$, 체류시간은 $60{\sim}90min$ 범위에서 안정적인 열분해가 일어났다. 또한 이번 과제 수행을 통해NC 가스의 연소기를 개발 적용하여 NC 가스의 열분해 열원으로 사용 가능성을 확인하였으며, NC 가스 연소 시 대기 측정을 통하여 규제치도 만족함을 확인할 수 있었다. 지금까지 나온 결과는 장기 연속 운전과 scale-up을 위한 기초 자료가 될 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.100-100
• /
• 2011

포항가속기연구소에서는 제3세대 방사광가속기 성능향상사업(PLS-II)을 수행하고 있다. 2010년 12월 말 PLS (Pohang light Source) 해체를 시작한 후 2011년 6월 말 까지 PLS-II 저장링 건설을 완료 하였으며 현재 시운전을 계속하고 있다. 성능향상은 기존 PLS 건물을 그대로 유지한 채 삽입장치를 20기 까지 설치하도록 변경하도록 하였으며 전자빔의 에너지는 2.5 GeV에서 3 GeV로, 빔전류는 200 mA에서 400 mA로 증가시키는 반면 빔에미턴스는 약 1/3로 줄인다. 저장링 진공시스템은 저장된 전자가 충분한 시간동안 저장되도록 운전시 2${\times}$10-9 Torr 이하의 진공도를 가지도록 건설하였다. 본 발표에서는 지난 2년 동안 진행되어온 PLS-II 저장링 진공시스템에 대한 설계, 제작, 시험, 설치, 시운전 및 건설 일정/인력에 등에 대하여 보고하며 PLS 건설 및 해체에 대한 내용도 보고한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.79-84
• /
• 2005

고속철도는 한번에 1천명에 달하는 승객을 태우고 시속 300km를 넘는 고속으로 주행하는 만큼 성능과 안전에 대한 철저한 사전 검증이 필수적이며, 특히 새로운 차량시스템의 개발은 철저한 성능검증 및 안전성을 확보하는 시험평가 과정을 반드시 거쳐야 한다. 본 논문에서는 최고속도 350km/h인 한국형 고속철도 차량시스템 개발사양의 성능요구 조건을 입증하기 위한 시험으로서, 핵심 개발품 단위별 구성품 시험, 개발품 단위간의 조합시험, 차량에서의 기능 동작 확인을 위한 완성차시험(단차시험 및 편성시험)및 전기신호 및 선로구축물 시스템과의 적합성 및 연계성을 확인하는 시운전 시험으로 구분하여 한국형 고속철도 차량시스템의 성능시험 체계 및 성능시험 기준(안)의 개발 내용을 소개하고자 한다.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.286-293
• /
• 2003

The prototype of Korean high speed train (HSR350), composed of two power cars, two motorized cars and three trailer cars, has been designed, fabricated and tested. In this paper, the body vibration has been reviewed from the viewpoint of the vehicle's safety and the vibration limits for components and sub-assemblies mounted on the car-body using by the experimental method. And, the dynamic characteristics, such as jerk, natural mode and kinematic mode, have been reviewed. The KHST has been run to 300 km/h in the KTX line and the results of on-line test show that it has no problems in the vehicle's safety and the vibration limits. And the characteristics of body vibrations has been predicted at 350 km/h by fitting curve about the measured acceleration signals.

• Journal of the Korean Society for Railway
• /
• v.5 no.3
• /
• pp.158-166
• /
• 2002

In this paper, we introduce the software and hardware of the measurement system for on-line testing and evaluation of high speed railway. The test items focus on the verification of the performance and acquirement of the technical data of the high speed railway system. The software controls the hardware of the measurement system, perform the analysis and calculation of measurement data and acts as interface between users and the system hardware. For this purpose, three programs a measuring program, a monitoring program and post-processing program are developed. The detailed test scenario is in the process of development to closely follow the process of development and design of the system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.549-554
• /
• 2003

Recently, the ride comfort problem becomes increasingly important because of today's needs for train speedup. The concept of ride comfort is equivocal. Generally, it is defined as the body vibration. The prototype of Korean high speed train (KHST), composed of two power cars, two motorized cars and three trailer cars, has been designed, fabricated and tested by the domestic researchers. In this paper, the ride comfort has been reviewed by the experimental method. The on-line test of KHST has been carried out up to 260km/h in the KTX line and proved that KHST has no problems from the viewpoint of the comfort ride at this speed. And the ride index lot KHST has been predicted at 300km/h and 350km/h by fitting curve.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.268-271
• /
• 2010

Hypersonic engine test facility with ejector system was tested. Ejector system was designed by revised EJSIMP code. The performance of the ejector system was predicted by numerical analysis. As a result, ejector system satisfied the facility design requirement. Based on the pressure level, the facility was successfully started at Mach 3.5 and 20km altitude condition.