• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.782-787
• /
• 2023

Korea augmentation satellite system (KASS) integration, verification, qualification (IVQ) activity is verification of requirements for KASS system and its sub-system that were performed based on the inspection, analysis, review of design, test (IART) method from factory acceptance test (FAT) to test readiness review (TRR) after critical design review (CDR) was closed. In the FAT phase, developed equipment was installed on the test platform and we were verified interfaces between sub-systems and coupling test with the kass control station (KCS). In the site aceeptance test (SAT) phase, on-site verification was conducted by installing equipment verified by FAT such as kass reference station (KRS), kass processing station (KPS), kass uplink station (KUS), KCS. However, considering the developed plan and status, SAT was divided into 3 phases and coupling test was performed. In the TRR phase, the KASS system verification was performed through FAT's test list and additional test list using the satellite based augmentation system (SBAS) broadcast signal from geostationary earth orbit (GEO) 1.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.582-590
• /
• 2007

In view of the analysis of the phenomena and the prediction of the performance, mathematical modelling and simulation of a high temperature pilot reactor for water gas shift reaction (WGSR) has been carried out. Multiscale simulation incorporated computational fluid dynamics (CFD) technique, which has the capability to deal with the reactor shape, fluid and energy transport with extensive degree of accuracy, and process modeling technique, which, in turn is responsible for reaction kinetics and mass transport. This research employed multiscale simulation and the results were compared with those from process simulation. From multiscale simulation, the maximum conversion of was predicted approximately 0.85 and the maximum temperature at the reactor was calculated 720 K, resulting from the heat of reaction. Dynamic simulation was also performed for the time transient profile of temperature, conversion, etc. Considering the results, it is concluded that multiscale simulation is a safe and accurate technique to predict reactor behaviors, and consequently will be available for the design of commercial size chemical reactors as well as other commercial unit operations.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.358-363
• /
• 2007

Reinforcing steel work plays an important role in terms of its structural performance or weight of construction cost for reinforced concrete structures. Precise estimation of re-bar quantity gives a basis for managing the reinforcing steel work effectively. However, the estimation process is still performed ineffectively based upon the expert's experience or manpower in spite of the advanced technology or improvement efforts. Therefore, the purpose of this research is to develop a prototype system for taking-off the quantity of reinforcing steel bars quickly and accurately in an order consistent with the specific members identified on the drawings. An estimate algorithm considering the connection, settlement and coating thickness of re-bars was suggested regarding to their replacement conditions which places more emphasis on constructibility. Also, this system produces the shop drawings automatically with the calculation results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.278-278
• /
• 2018

현재 우리나라에서는 행정안전부의 풍수해저감종합계획, 사전재해영향성검토협의, 재해위험지구개선사업 등에 해외에서 개발된 상용프로그램이 사용돼 접근성 저하로 인해 지자체 방재담당자의 실무나 대학에서 연구용으로 다루기에는 한계가 있다. 이에 본 연구에서는 내수침수, 외수침수, 2차원 침수해석으로 구성하여 GUI 기능을 강화한 통합침수재해지도 작성시스템(i-FIM, Integrated Flood Inundation Modeling system)을 개발하여 입력자료의 구성 및 매개변수의 수정이 용이하게 함으로써 하수관망 등에 부분적인 설계 변경이 있는 경우 지자체 방재담당자가 간단한 작업을 통해 침수영향 변화를 쉽게 파악할 수 있도록 하였다. 또한, 상세한 지형의 반영이 필요한 도시지역의 2차원 침수해석의 경우 계산격자 망의 크기가 작아질수록 소요되는 계산시간이 기하급수적으로 증가하는 한계가 있어 i-FIM에서는 계산격자를 $2{\times}2$, $3{\times}3$, $5{\times}5$ Subgrid 형태의 격자를 적용하고, 병렬프로그래밍과 계산시간조정 기능을 추가하여 2차원 침수해석 모형의 계산 속도를 향상시켰다. 이를 실무에 적용하기 앞서 2006년 집중호우로 인해 안성시에서 발생한 제방 붕괴사상, 2016년 태풍 차바로 인해 울산시에서 발생한 제방 월류 사상을 통해 침수흔적도와 비교하여 검증을 실시하였다. i-FIM에서 최종적인 2차원 침수해석 결과는 2017년에 개정된 '재해지도 작성 기준 등에 관한 지침'의 침수심 등급 구분의 색채 설정에 따라 각 격자별 침수심을 표출함으로써 표준화된 재해지도 작성이 가능하도록 하였다. 또한, 포털사이트의 지도 및 위성지도에 표출함으로써 침수 위험이 발생할 수 있는 지역의 현재 이용 용도를 파악하여 침수재해에 대한 상세한 대책을 마련할 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1011-1015
• /
• 2005

본 실험에서는 부력 조건이 달라질 때 단공방류구에서 정체수역으로 수평방류되는 부력제트의 거동을 규명하였다. LIF (Laser Induced Fluorescence) 시스템을 이용하여 수행하였는데, LIF 시스템은 고해상도의 이미지를 취득할 수 있어 데이터의 정확도가 높으며, 동시에 한 평면상의 농도장을 일시에 측정할 수 있는 장점이 있는 기술이다. LIF 시스템은 크게 세부분으로 구성되어 있는데 방출시스템, 포착시스템, 처리시스템이 그것이다. 실험 조건을 고려해서 온수를 이용하여 주변수와의 밀도차를 재현하였으며, LIF 시스템의 추적입자로 형광염료 Rhodamine B를 사용하였다. 또한, 실험 데이터 취득과정에서 필요한 검정과정을 수행하였는데, LIF 시스템에서 검정과정은 레이저 입사광의 강도가 불균등한 분포를 가지는 점과 주변수의 매질에 의한 근의 감쇠가 발생하는 문제를 해결하기 위한 것이다. LIF 시스템은 부력제트의 농도장을 매우 정밀하게 측정할 수 있는데, 방류밀도 Froude 수가 변함에 따라 측정된 순간이미지를 통해 제트의 진화과정을 상세하고 가시적으로 확인할 수 있었다. 검정과정을 거친 농도 종단면에서 중심선의 연장선이 LIF 시스템에 의해 측정된 순간이미지의 중심선 궤적과 거의 일치하는 것도 알 수 있었다. 또한 LIF 시스템을 통해서 취득된 단일수평부력제트의 궤적과 중심선 희석률을 기존의 상용모형인 VISJET과 CORMIX1에 의해 예측된 결과와 비교$\cdot$분석한 결과, 제트 중심선 궤적의 경우, LIF 시스템을 이용한 측정값은 대체로 VISJET 모형의 결과와 일치하는 것으로 밝혀졌다. 중심선 희석률의 경우, LIF 측정값은 대체로 CORMIX1 모형, Cederwall(1968)의 경험식과 일치하는 경향을 보였다.0\%$일 때가 밸브를 $60\%$와 $80\%$ 개폐시켰을 때보다 $0.3kg/cm^2,\;0.29kg/cm^2$ 낮게 나타나 밸브를 전체 개방 했을 때 관로내의 수압이 상수설계기준에 적합한 수압을 유지함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.262-268
• /
• 2017

The energy consumption of buildings is approximately 20.5% of the total energy consumption, and the interest in energy efficiency and low consumption of the building is increasing. Several studies have performed energy analysis and evaluation. Energy analysis and evaluation are effective when applied in the initial design phase. In the initial design phase, however, the energy performance is evaluated using general level information, such as glazing area and surface area. Therefore, the evaluation results of the detailed design stage, which is based on the drawings, including detailed information of the materials and facilities, will be different. Thus far, most studies have reported the analysis and evaluation at the detailed design stage, where detailed information about the materials installed in the building becomes clear. Therefore, it is possible to improve the accuracy of the energy environment analysis if the energy environment information generated during the life cycle of the building can be established and accurate information can be provided in the analysis at the initial design stage using a probability / statistical method. On the other hand, historical data on energy use has not been established in Korea. Therefore, this study performed energy environment analysis to construct the energy environment historical data. As a result of the research, information classification system, information model, and service model for acquiring and providing energy environment information that can be used for building lifecycle information of buildings are presented and used as the basic data. The results can be utilized in the historical data management system so that the reliability of analysis can be improved by supplementing the input information at the initial design stage. If the historical data is stacked, it can be used as learning data in methods, such as probability / statistics or artificial intelligence for energy environment analysis in the initial design stage.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.5
• /
• pp.331-344
• /
• 2009

Recently, it is expected that the agricultural and stockbreeding industry are damaged by the China-Japan-South Korea FTA and FTA between the United States and South Korea. After free trade, it is increasing to import crops, aquatic products, and livestock which are produced in a foreign land. But it is affected negatively to the trust relationships and markets, because of breaking it out that low grade foreign products are turned into domestic products. For this reason, we need the traceability management system. In this paper, it designs and implements the traceability management system using RFID and USN providing distribution traceability information as well as the traceability information of the growth environment, automatic control according to the facility growing and monitoring of the storehouse. The implemented whole systems consist of the growth environment monitoring and the traceability management. First, the growth environment monitoring shows the environment of plantation and automatic controller of the storehouse and growing facility. This growth environment monitoring information provides the detailed information about growth environment and writing the farming diary automatically by producer. Second, the traceability management provides all of the traceability information such as production, shipment and consumption to consumers. The traceability management system that has been designed and implemented using RFID and USN in this paper, provides the u-IT agriculture to producer and the reliability about agricultural products. In addition, this system provides the foundation data to operate GAP and HACCP, and becomes the advantaged agricultural products of the interior of a country by application of this system.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.710-717
• /
• 2009

The researchers and planners are using patent/paper map system to analyze the research trend, but we can't use the existing analysis system because of the specialty of korean traditional medicine. Thus we deduced the analysis models from preceding research and system and designed 14 analysis models which are composed of basic, detail and complex models. We verified the analysis models using papers which has 'meridian' keyword among 16,000 papers stored in OASIS. From the analysis result, we know that the meridian study has just entered in the maturity and is closely related with other parts of korean traditional medicine as physiology etc. And we verified the proposed analysis model from the comparison with the analysis models of preceding systems. The analysis model will be used for the development of Korean traditional medicine paper map analysis service scenario and system.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.13-20
• /
• 2009

Recently, as traffic flooding attacks such as DoS/DDoS and Internet Worm have posed devastating threats to network services, rapid detection and proper response mechanisms are the major concern for secure and reliable network services. However, most of the current Intrusion Detection Systems (IDSs) focus on detail analysis of packet data, which results in late detection and a high system burden to cope with high-speed network traffic. In this paper we propose an SNMP-based lightweight and fast detection algorithm for traffic flooding attacks, which minimizes the processing and network overhead of the detection system, minimizes the detection time, and provides high detection rate. The attack detection algorithm consists of three consecutive stages. The first stage determines the detection timing using the update interval of SNMP MIB. The second stage analyzes attack symptoms based on correlations of MIB data. The third stage determines whether an attack occurs or not and figure out the attack type in case of attack.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.4
• /
• pp.312-333
• /
• 2005

SIP(Session Initiation Protocol) has been proposed for session control protocol of Internet multimedia communication system like VoIP(Voice over IP). SIP has complicated session control steps to support various kinds of audio and video formats and to assure service quality of real time data communication. Up until now, existing protocol analyzers can not provide such detailed information of SIP based communication system. In this paper, therefore, we propose a new protocol analyzer as a tool that can analyze and diagnose SIP based multimedia communication system throughout the session initiation, data exchange and session change steps. The propose traffic analyzer, which is called STAT(SIP based Traffic Analysis Tool), Is implemented on Winder's environment so that it is generally usable and extensible. Since STAT analyze low level packets captured via Ethernet broadcasting property, it is able to provide session status and real time traffic monitoring information without any affection to the communication system. The STAT which is implemented in this paper. therefore, is expected to be a useful tool for developing and managing of a SIP based multimedia communication system.