• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.97-107
• /
• 2013

Underwater wireless communication systems can be useful for underwater environment observation, catastrophe prevention, ocean resources exploration, ocean organism research, vessel sinking exploration, and so on. However, unlike terrestrial wireless communication, underwater wireless communication should consider factors such as long propagation delay, limited transmission capacity, high bit-error rate due to potential loss in power, ambient noise, man-made noise, multi-path, etc., because of the inherent characteristics of water. Thus, in this paper, we propose a suitable media access control(MAC) protocol that applies a combination of the ALOHA MAC protocol and the CSMA/CA MAC protocol to underwater environment. We further propose a mathematical analysis model to evaluate performance. We also verify performance improvement in the proposed scheme in comparison with existing MAC protocols.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.45-50
• /
• 2003

Global full 3D finite element analysis fatigue models are constructed for flip-chip BGA on system board to predict the creep fatigue life of solder joints during the thermal cycling test. The fatigue model applied is based on Darveaux's empirical equation approach with non-linear viscoplastic analysis of solder joints. The creep life was estimated the creep life as the variations of the four kinds of thermal cycling test conditions, pad structure, composition and size of solder ball. The shortest fatigue life was obtained at the thermal cycling test condition from $-65^{\circ}C$ to $150^{\circ}C$. It was increased about 3.5 times in comparison with that from $0^{\circ}C$ to $100^{\circ}C$. At the same conditions, the fatigue life of SMD structure as the change of pad structure increased about 5.7% as compared with NSMD structure. Consequently, it was confirmed that the fatigue life became short as the creep strain energy density increased in solder joint.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.1-10
• /
• 2008

In wireless internet, the location information of the user is one of the important resources for many applications. One of these applications is Location-Based Services (LBSs) which are being popular. Because, in the LBS system, users request a location-based query to LBS servers by sending their exact location, the location information of the users can be misused by adversaries. In this regard, there must be a mechanism which can deal with privacy protection of the users. In this paper, we propose a cloaking method considering both features of K-anonymity and L-diversity. Our cloaking method creates a minimum cloaking region by finding L number of buildings (L-diversity) and then finding number of users (K-anonymity). To support this, we use a R*-tree based index structure and use filtering methods especially for the m inimum cloaking region. Finally, we show from a performance analysis that our method outperforms the existing grid based cloaking method.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.2
• /
• pp.155-166
• /
• 2007

We have designed a high resolution proton and electron telescope for the detection of high energy particles, which constitute a major part of the space environment. The flux of the particles, in the satellite orbits, can vary abruptly according to the position and solar activities. In this study, a conceptual design of the detector, for adapting these variations with a high energy resolution, was made and the performance was estimated. In addition, a parallel processing algorithm was devised and embodied using FPGA for the high speed data processing, capable of detecting high flux without losing energy resolution, on board a satellite.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.9-14
• /
• 2012

Maritime security incidents by pirates and by terrorists increase, but maritime incidents investigation models are limited to figure out the maritime security incidents. This paper provides the analysis model for maritime security incidents. To develop this analysis model, this categorizes five threat factors, the ship, the cargo type, port system, human factor, information flow system, makes the risk assessment matrix to quantify the risk related to threat factors and classifies four priority categories of risk assessment matrix. Also, this model makes from the frameworks which include a variety of security initiatives implementing in stakeholder levels like international organizations, individual governments, shipping companies, and the ship. Therefore, this paper develops the Analysis for Maritime Security Management model based on various security initiatives responding to the stakeholder levels of maritime security management and top-bottom/bottom-up decision trees, and shows the validity through verifying the real maritime security incident of M/V Petro Ranger.

• Journal of The Korean Association of Information Education
• /
• v.8 no.4
• /
• pp.563-571
• /
• 2004

The purpose of this paper is to suggest the method the fourth grade who haven't experienced with online project learning can perform the on-line project learning efficiently. And it is to see if there are any effects and improvement in using ICT after applying the online project learning system to the real school environment. For this, after analyzing the curriculum of Grade 4 in elementary school and abstracting some factors to improve the Information utilizing ability, I chose 12 topics of project learning. I built the on-line learning room and chose 6 topics among them. After practicing the project, I inspected the effects on them. And to understand the ICT-utilizing ability of the students, I analyzed if there were any improvement in ICT-utilizing ability with some questionnaires which consist of information collecting, information processing, and information interchanging according to the standards of Information utilizing ability of elementary and middle school students.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.277-280
• /
• 2010

The prevention of disasters is important to prepare in advance through analysis and an estimate. But for all the efforts of the government to stave off disasters, the damage out of a guerilla localized heavy rain caused the global warming, a landslide and inundation is growing. To prevent these damages, the basic data and system through systematic research and analysis should be set up. But it is true that collecting of the basic data and the system for preventing disasters are either constructing or insufficient so far. In this research, by using topography spatial data including LiDAR data including the aerial photo and digital maps, and etc. the factor of a disaster, the disaster risk element was extracted. Moreover, the disaster region about the disaster generation available region was evaluated in advance using the easy disaster analysis of current situation photo map which made with the grid analysis method and weighted value estimate technique.

• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.319-332
• /
• 2002

This study is focused on the characterization of an effective hydraulic conductivity in each hydrogeologic unit assumed as an equivalent continuum medium in the granitic area. Four boreholes of 3" diameter were installed and a Multi-packer system was facilitated in the selected borehole. Various in-situ tests including the fracture logging, constant injection and fall-off tests, slug and pulse tests were carried out. A hydrogeologic unit was defined into the upper and lower zones based on the variation of fracture properties and hydraulic conductivities. The difference of the result obtained by the various hydraulic tests and the effective characterization techniques on rock mass permeability are also discussed. The effective hydraulic conductivity of the upper unit was measured by two times(5.27E-10 m/s~7.57E-10 m/s) that of the lower unit(2.45E-10 m/s~6.81E-10 m/s)through the constant injection and fall-off tests.

• Journal of Intelligence and Information Systems
• /
• v.14 no.4
• /
• pp.47-68
• /
• 2008

The aim of this research is to develop a new business model using mobile RFID in exhibition spaces such as museums and art galleries. Using mobile RFID, the exhibition space is expected to be evolved from a simple media space only for the exhibition to an extended space integrating media, commerce and entertainment. This paper proposes a u-Exhibition business model and its scenario in the u-Exhibition space. We discuss the real-world issues for the implementation and show the ways of investigating working conditions for the business model through revenue simulation and analyzing the expected value of tag installed on the exhibition space by so-called 'tag evaluation model.'

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.272-276
• /
• 2014

Recording of the research procedure and results is the compulsory virtue to scientists. This ensures the objectivity and integrity of research and has become a cornerstone for a junior scholar. Furthermore, we can save time and efforts by avoiding duplication study. Recently on its patent application, the value of laboratory notebook is going to increase. However, there is a limitation to record a voluminous work in a traditional writing laboratory notebook. So, it could be an alternative proposal to convert that into an electronic work or develop an electronic laboratory notebook. Our journal has continuously pursued globalization. Laboratory notebook could be one of the key factors for that goal. In the present study, the authors reviewed the needs for laboratory notebook and tried developing a proto-type electronic laboratory notebook.