• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.8
• /
• pp.8-17
• /
• 2019

In this study, a model reduction technique was used to develop a precise noise and vibration prediction model for the individual components of a driveline system. The dynamic reduced-order model generated by the Craig-Bampton method was applied to perform dynamic analysis of an electric agricultural power cart. The natural frequency and acceleration response results were analyzed according to the different number of dominant sub-structural modes contained in the reduced-order models. Through the analysis results, it was confirmed that a sufficient number of dominant sub-structures to satisfy the operating conditions should be selected to construct an optimal reduced-order model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.133.2-133.2
• /
• 2016

차세대 디스플레이로 유연하고 투명한 기능들이 요구되면서 Indium Tin Oxide(ITO)를 대체하기 위한 투명전극 개발 연구가 많이 수행되고 있다. ITO는 높은 투과도와 낮은 저항으로 현재 가장 많이 활용되고 있는 투명전극 소재이지만 유연성이 떨어져 유연 터치 패널 소재로 활용하기 어렵다. 이러한 문제 해결을 위해 ITO 대체 물질로 CNT, Graphene, Metal mesh, Ag nano wire, 전도성 고분자 등의 차세대 투명 전극 소재가 대두되고 있다. 본 연구에서는 메탈 메쉬 전극 소재로 사용하기 위해 Cu 박막 증착 시 플라즈마 표면처리를 통해 밀착력 및 저항을 개선하였다. Cu 금속 박막의 양산화를 위한 공정으로 자체 제작한 Linear Ion Source(LIS)가 부착된 roll to roll 시스템을 적용하여 플라즈마 전처리 공정 및 Ni buffer layer 도입 이후 Cu 박막을 형성하였다. 그 결과 PET 기판과 Cu 박막 사이의 밀착력을 0 degree에서 5 degree까지 향상시킬 수 있었고, 플라즈마 표면처리를 시행함으로써 저항 또한 감소되는 결과를 얻을 수 있었다. 본 연구를 통해서 폴리머 기판 소재에 in-situ로 표면처리 및 Cu 금속 박막을 증착함으로써 금속 박막의 밀착력 및 전기적 특성이 향상되는 공정 기술을 개발하였다.

• 프린팅코리아
• /
• v.11 no.12
• /
• pp.88-89
• /
• 2012

세계적인 커팅 플로터 생산기업인 미국 수마(SUMMA)에서는 최근 평판커팅기인 F시리즈를 선보였다. 단단한 소재부터 롤 원단까지 다양한 소재를 커팅할 수 있는 F시리즈는 견고한 몸체에 편리한 툴 교환이 특징이다. 다양한 장점을 가진 F1612는 2011년 베스트 와이드 포맷 피니싱 디바이스를 수상하기도 했다. 수마 F시리즈의 국내 총판인 '이에스티시스템'을 찾아가 최신 평판 커팅 시스템에 대해 알아봤다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.477-480
• /
• 2004

최근 생산 현장에 최종 제품의 성능 보장을 위해 사용될 소재의 특성을 검사하는 장비가 도입.운영되고 있다. 이들 장치 중 Rheotruder는 폴리머 소재의 품질 평가기준이 되는 점도를 측정하기 위해 제작되었으며 이는 지연시간 및 비선형적 특성을 갖게 되어 시스템의 분석이 용이하지 않다는 문제점을 갖는다. 본 연구에서는 비선형 특성을 갖는 측정 장치의 성능 평가를 용이하게 하기 위해 동적 시스템 모델링이 가능한 TDNN(Time Delay Neural Network)을 도입하여 실제 Rheotruder에 적용하여 봄으로써 그 유용성을 확인하고자 한다.

• Food Science and Industry
• /
• v.51 no.3
• /
• pp.245-258
• /
• 2018

Natural and synthetic antibacterial materials are used in foods to avoid bacterial contamination-induced food poison and deterioration. Due to the human and environmental safety, natural products including plant extracts have been extensively added into foods as antibacterial materials. Since some of core molecules comprised in those plant extracts are hardly dissolved in aqueous phases or food matrixes, nanotechnological approaches have been suggested to overcome such obstacles. Here we report domestic and international various types of plant- or non-plant-origin antibacterial materials that have been commercialized and used for the food industry. To improve solubility and stability of such antibacterial materials, nano-encapsulation or nano-complexation methods are also investigated focusing on the utilization of dextrins and proteins as coating materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.120.2-120.2
• /
• 2013

반도체 소자의 소형화로 신개념 화학증착공정 구현을 위한 장비와 화학증착소재의 개발이 활발이 연구되고 있다. 특히 증착소재의 물리적 화학적 특성을 파악하고 가장 적합한 소재를 선택하기 위한 연구도 변행되고 있다. 많은 연구자들이 소재 평가를 위해 가스크로마토그래피, 질량분석기, 적외선 분광기 등을 이용한 화학증착소재의 특성을 파악하기 위해 노력하고 있다. 하지만 실제 화학기상증착(Chemical Vapor Deposition)법과 원자층증착(Atomic Layer Deposition)법 공정에서 웨이퍼 표면에서의 화학증착소재의 흡착거동에 대한 연구는 거의 전무한 실정이다. 따라서 본 연구에서는 개선된 Attenuated Total Reflectance(ATR)분광계를 이용하여 표면에 흡착된 소재의 흡착거동에 대해 분석을 수행하였다. 평가에 사용된 화학증착소재는 C-Zr (Tris (dimethylamino) cyclopentadienyl zirconium)이며, Fourier Transform Infrared Spectroscopy (FT- IR)시스템 내에 설치된 ATR 분광계 표면에 흡착된 C-Zr 증착소재를 다양한 공정조건(온도 및 반응가스, 플라즈마 파워 등)에서의 거동 변화를 연구하였다.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.252-256
• /
• 2023

The galvanostatic polarization technique was used to accelerate corrosion in high chromium cast iron (HCCI) immersed in a simulated slurry solution of 0.1 mol dm^-3 H₂SO₄, 0.05 mol dm^-3 HCl, and 10 wt% SiC. The HCCI contained 27 wt% of Cr and 2.8 wt% of C, and its microstructure mainly comprised austenitic and carbide phases. A two-electrode system using a dense carbon rod and the HCCI sample was employed for the galvanostatic polarization by applying an anodic current for 24 hours. The corrosion rate increased upon applying the anodic current, but the increase was not significant, particularly for current densities higher than 10 µA cm^-2. Following polarization, the corrosion morphology revealed that the anodic current accelerated surface corrosion in the HCCI; however while the depth of the corroded area increased, the increase was not substantial. The propagation behavior of the anodic current and its impact on corrosion were further discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.809-812
• /
• 2006

This paper describes about the vision system, which was developed for the recognition of material management characters in the slab processing line. The material management characters, which are marked at the surface of a slab, are recognized by real time processing before slab moves to the next hot strip line. The vision system for the character recognition include that CCD camera system which acquire slab image, image transmission system which transmit captured image to the long distance, I/O devices for the interface with peripheral control system. We have installed vision system to the slab processing line and tested. Through the testing, we have checked durability, reliability and recognition rate of our system. In the results, we have confirmed that our system have good performance and higher recognition ability.

• Composites Research
• /
• v.36 no.5
• /
• pp.361-368
• /
• 2023

Composite materials used in aircraft must be certified using approved materials to ensure the the airworthiness of the aircraft. Certification is carried out by verifying the physical properties and processes of the materials, and producing material and process specifications. The composite material certification system in ROK(Republic of Korea) has been established through the MOLIT(Ministry of Land, Infrastructure and Transport) pilot certification project for aircraft composite materials. Currently, the KIAST(Korea Institute of Aviation Safety Technology) operates and manages the certification and shared data system. This study identifies realm for improvement in the established certification system for aircraft composite materials based on empirical evidence and aims to propose measures for the certification and industrial promotion of domestically produced aircraft composite materials.

• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.338-344
• /
• 2022

It is necessarily required in developing Si-based anode materials for lithium ion batteries, and the related researches are actively working especially in Si-carbon composite material. On the other hand, the photovoltaic and semiconductor industries discard huge amount of Si resources, facing the environmental issue. In this study, recycled Si resource is adopted to obtain Si-carbon composite for LIB(Lithium-Ion Batteries). In order to improve high-capacity retention characteristics and cycle stability of a Si anode material for the LIB, two differenct composites having a mass ratio of silicon and pitch of 1:1 and 2:1 are synthesized and electrochemical characteristics of the anode material manufactured by simple self-assembly method. This result in excellent initial capacity with stable cycle life, and confirming the potential use of recycled Si material for LIB.