• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.35-41
• /
• 2013

Nowadays, automated modeling system for steel margin based on interactive user interface has been developed and applied to the production design stage. The system could increase design efficiency and minimize human error owing to recent CAD technique. However, there has been no approach to the pre-nesting design stage at all in early modeling process especially where ship model should be handled at more than two design stages using AVEVA Marine. A designer of the design stage needs artificial intelligence system beyond modeling automation when 3D model must be prepared in early modeling process using AVEVA Marine because they have focused on 2D nesting traditionally. In addition, they have a hard time figuring out the model prepared in previous design stage and modifying the model for steel purchase size in early modeling process. In this paper, artificial intelligence modeling system for automated application of steel margin in early modeling process using AVEVA Marine is developed in order to apply to the pre-nesting design stage that can detect effective segments before a calculation to find if a segment locates near block butt boundaries by filtering noise segments among lines, curves and surface intersections based on IT big data analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.311-318
• /
• 2004

It is required to design the RF link with sufficiently stable signal margin to minimize bit errors and improve the quality of received data in the telemetry system modulated digitally like PCM/FM. In case of the vehicle flying at a high speed, the variation of the gain pattern between transmitting and receiving antenna and the fee space loss due to flight distance cause the fluctuation of link. In this paper, KSR(Korea Sounding Rocket)- III, the first domestic liquid rocket which was successfully launched in Nov. 2002 is introduced. The SNR(signal-to-noise ratio) variation of the telemetry signal which was measured at S-band ground station, the one which was simulated considering the flight trajectory, and the attitude variation such as roll, pitch and yaw are compared, analyzed, and agree very well. In addition, two virtual flying situations are simulated and evaluated-only one antenna is equipped in one case, and rocket is roll-free in the other.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.6 s.360
• /
• pp.28-33
• /
• 2007

The front-end system having a capable of 2x reading and writing of BD-R/Ra/ROM is developed. Its readability is improved by adopting 5-tap adaptive partial response maximum likelihood (PRML) with the PR(a,b,c,d,e) type channel. Due to the proposed PRML, less than $2{\times}10^{-4}$ of the bit error rate (BER) is achieved with radial and tangential tilt margin of over${\mp}0.6{\circ}$ on 25GB disc in 2x speed. The method of an optimum Power control (OPC) for stable writing of various BD-R/RE is proposed. The developed chip contains 14-million transistors in a $60mm^2$ dies, and is fabricated in $0.18-{\mu}m$ CMOS technology.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.171-179
• /
• 2013

This paper presents a comparative study on application of Routh-Hurwitz and Llewellyn absolute stability criteria to a scaled telerobotic system. The dynamic equations of the telerobotic system are given, and the transfer function of the system is obtained for further stability analysis. The stable margins of controller gains are obtained using both stability analysis methods, and the differences in the results are described and explained. The paper is concluded by a numerical example verifying performed stability analysis.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.67-76
• /
• 2006

This paper describes the analysis method to define the system specification for conducted EMI environment and verification method to evaluate the conducted EMI performance. Conducted EMI environment is characterized by the electrical power subsystem which is mainly issued by the switching circuit noise, common ground impedance coupling. To define and control these EMI problems, EMI assesment through system analysis are preceded at the early design phase and then EMI reduction methods are applied during the unit/system development phase. System EMC should be carefully controlled and designed in the consideration of EMC safety margin and its performance is fully evaluated at the whole development period.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.1
• /
• pp.85-93
• /
• 1988

Installation of the digital carrier system is increased rapidly in the telecommunication network, and most of systems are operating over a twisted pair conductor. Many systems are accommodated in multipair cable for their economical installation, therefore we must consider tha crosstalk interference between digital systesm. This paper considers the calculation method which determine crosstali interference between signals in multipair. And the transmission margin at a certain error rate is analyzed considering crosstalk power. Finally, this paper estimates the crosstalk noise susceptibility of 2.048Mbps relative to 1.544Mbps PCM system and 1.544Mbps relative to 2.048Mbps PCM system, and then considers the methos which both systems can operate together in a same cable.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.112-120
• /
• 2012

In this paper, we manufactured the wireless video stream system after we scanned EMI(Electro Magnetic Interference)noise in the system. and then, we analysed the noise frequency in the interface, circuit and PCB(Printed Circuit Board). we suggested EMI noise reduction technique. The applied reduction method is low pass filtering, the internal layer placement for high speed video data line and optimization of the system ground condition. the manufactured system improved about 2 ~ 20[dB] margin for EMI limit 40[dBuV/m] at 30 ~ 230[MHz] and 47[dBuV/m] at 230 ~ 1000[MHz].

• Journal of the Korea Computer Industry Society
• /
• v.2 no.3
• /
• pp.321-328
• /
• 2001

Existing internet auction systems have adopted the form which gives a win to the auction bidder who proposes the top bid price for the goods posted on the auction board. But they haven't been satisfying the automatical one-step processing for user’s convenience because they must require continuous care of user for bidding and checking as well as neglecting the convenience of user interface while participating in the electronic bidding system. The agent push mail to a auctioneer information that able to get how much profit as calculate duration time and start price with bidding history stored database. So, this thesis propose a multi-agent system in internet auction that generate the highest margin for auctioneer’s goods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.4
• /
• pp.288-299
• /
• 1996

The co-channel digital radio-relay system improves effectively the use of radio frequency allocations by transmitting signals separately on both orthogonal allocations, and thereby not only the total transmission capacity of frequency band but also its bandwidth effciency are almost doubled, compared tothe interleaved digital radio-relay system. Therefore, the study on the development and application of the con-channel scheme is of importance, for the efficient use of limited frequency bnad. In this paper, we derived the eqations for calculating fade margin as a function of path length as well as error performance in terms of the outage probability for co-channel digital radio-relay system below 10GHz. And, simulation was given to demonstrate how to apply those equations to the real situation.

• Journal of Satellite, Information and Communications
• /
• v.3 no.2
• /
• pp.38-42
• /
• 2008

In 2005, DVB-S2 spec. was finalized. But with a large number of DVB-S receivers already installed, backwards compatibility may be required for a period of time, where old receivers continue to receive the same capacity as before, while the new DVB-S2 receivers could receive additional capacity broadcasts. To facilitate the reception of DVB-S serviced by DVB-S2 receivers, implementation of DVB-S in DVB-S2 chips is highly recommended. For the backward compatibility the system adapt the hierarchical modulation scheme. And the system has to meet system margin, so in this paper analyzes the effect according to the deviation angle and shows the BER performance. And finally this paper shows the result of the system implement using FPGA chip.