• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.67-70
• /
• 2010

X-ray absorption rate and multiplication factor of X-ray detector were calculated with Garfield code. High Z (= atomic number) was important factor to increase the absorption rate but low Z is also important to increase the multiplication. Five different gas composition were examined under the condition of 1400 V bias and 400 um gap. Xe 100% gas showed the highest absorption rate and He 96% + isobutene 4% showed the highest multiplication.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.483-487
• /
• 2012

In 1895, the discovered X-ray is used for not only in this field of medicine wide but also field. The detection of radiation after, people realized the risk of the radiation exposured recommended the principle about the protection of radiation by the part of the effort for lowering the radiation exposure. In this recommendation, all unnecessary radiation exposure have to be prevented by All doses include the protection of radiation, general idea of applicable two kinds of that it has to low maintain. Presently, in the General X-ray room of the clinical, the lead (Pb) was used for the shielding, However, because it had the problem of the lead poisoning which is fatal in the human body, the alternatives was showed. and Among them, the material that it is the tungsten was presented. in this research, the absorbed spectrum according to the thickness in the continuous X-ray energy of the tungsten which is not harmful to the human body through the Monte Carlo simulation, tried to compare with the absorbed spectrum of the lead (Pb). The tungsten confirmed that simulation presumption than result lead in the whole domain that absorbed probability was higher and it is considered that tungsten shows the absorbed efficiency higher than the lead in particularly, 70 keV ~ 90 keV and the tungsten is more useful to the X-ray energy cover of the high energy diagnostic area.

• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.67-76
• /
• 2022

The purpose of this study was to identify the effects of high fidelity simulation-based education for cardiac arrest emergency nursing applied to nursing students on communication self-efficacy, communication competence, and educational satisfaction. For this study a nonequivalent control group non-synchronized post-test design was used. Participants were 42 nursing students who attended in one university and completed the self-report questionnaire. Data were analyzed through frequency, percentage, mean, standard deviation, x² test, and independent t-test using the SPSS 22.0 program. As a result, communication self-efficacy (t=2.87, p=.007), communication competence (t=2.96, p=.005) and educational satisfaction (t=4.75, p=<.001) were significantly higher than in the control group after high fidelity simulation-based education. High fidelity simulation-based education for cardiac arrest emergency nursing was able to improve communication self-efficacy, communication competence, and educational satisfaction for nursing students.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.49-56
• /
• 2022

In this study, numerical simulations for reducing noise between floors in an apartment building was carried out using Active Noise Control (ANC) technology. In order to examine the feasibility of using ANC to reduce noise between floors, accelerometers and microphones for noise collection were installed in the inter-floor noise test facility to measure noise and vibration caused by the impact ball drop test. By using the measured data, Filtered-x Least Mean Square (Fx-LMS) algorithm-based ANC simulations were carried out. In the simulations, after deriving optimal simulation conditions including the adaptive control convergence coefficient, the noise reduction effect was analyzed through numerical simulations using the number of installed accelerometers and speakers as variables. Finally, it was confirmed that the noise between floors could be reduced using ANC technology under limited conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.296-303
• /
• 2020

This study examined the factors affecting the emergency nursing performance of nursing students during a simulation. The variables related to the simulation were the objective and subjective emergency nursing performance, critical thinking, program outcome, simulation satisfaction, simulation confidence, and simulation immersion. The participants were 92 senior students who provided informed consent with an explanation about attending the study. The general characteristics and simulation-related data were obtained from the students before and after the simulation. An assessor evaluated the objective emergency nursing performance during the simulation and program outcome through a report reviewed after the simulation. Data analysis was performed using the number, percentage, mean, standard deviation, X²-test, one-way ANOVA, Pearson correlation, and progressive regression through the SPSS/WIN 22.0 program. Emergency nursing performance by the assessor was negatively associated with the satisfaction of clinical practice (r=-.31, p=.005) and positively related to the subjective clinical performance (r=.23, p=.036). The affecting rate was just 12%, which was low for explaining the objective emergency nursing performance during the simulation. Further studies will be needed to explore other factors affecting the emergency nursing performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.916-919
• /
• 2004

In this paper, we proposed a new method of pre-operative planning for tibial deformity correction using double hexapod external fixator in pseudoacondroplasia. The 3-D computer graphic model of deformed tibia was reconstructed from 3 mm sliced CT data, and CAD model of double hexapod external fixator was developed. The fixator was composed of 170 mm diameter of three rings and 90 mm of twelve struts. The bone deformities and the osteotomy lines for double osteotomy were measured using X-rays, and the necessary joint values to correct the given deformities were obtained by inverse kinematics analysis. The computer graphic simulation was performed to visualize the deformity correction process and evaluate the analysis result. By examining the pre-op and post-op X-rays, the simulation result was in good agreement with the clinical outcomes.

• Journal of the Korea Society for Simulation
• /
• v.4 no.1
• /
• pp.37-44
• /
• 1995

본 논문은 가상현실 어플리케이션을 제작하기 위한 가상세계 저작도구인 VRAT(Virtual Reality Authoring Tool)의 설계 및 구현에 대해 기술한다. VRAT는 3D desktop, immersive, reflexive metaphor를 지원하며 실시간 3D 센서 시스템과 폴리곤 렌더링 시스템을 기반으로 객체 지향적인 가상현실 운영시스템, 가상세계 데이터베이스, GUI를 통한 저작시스템으로 구성된다. 이들 하부 시스템은 완전히 결합되어 있어서 VRAT시스템을 사용한 응용프로그램의 수행중에 기존의 3D CAD 시스템등에서 제작한 모델을 가상세계내에 배치하고 이들에 행위양식을 부여하는 태스크를 지정하거나 입력장치인 센서를 모델이나 시점에 연결하여 조종하는 것이 가능하다. 제안된 시스템은 범용성과 이식성을 고려하여 UNIX와 X-Window 시스템을 기반으로 X11, GL, PIXRECT, VGA 그래픽 하부 시스템과 SGI, SUN, HP 등의 워크스테이션과 PC 상에서 구현되었다.

• Tribology and Lubricants
• /
• v.29 no.1
• /
• pp.7-12
• /
• 2013

Turbine power control devices at a nuclear / thermoelectric power plant lead to failure by creating mechanical shocks and strong vibrations that are due to the strong elasticity of a spring and the inertia of the valve face during its rapid movement to block steam. To ensure durability of the turbine power control device, which is the main component in the power plant, it is necessary to develop a device that can prevent such vibrations. In this study, a cushion mechanism is added to the head of the hydraulic servo actuator, which is a turbine power control device. Moreover, the cushion mechanism, which includes various modifies shapes and orifices is investigated dynamically through modeling and simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.457-467
• /
• 1993

One of the important statistical quantities for optical waves through random media is the probability distribution of irradiance. From phenomenological models, several distribution functions have been proposed. In this paper, irradiance data are obtained by computer simulation, and by comparing the proposed distribution functions with simulation data by the moment method, the histogram method, and the $x^2$-test, the validity of each distribution function is investigated.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.397-398
• /
• 2020

최근 COVID-19(Coronavirus disease, 2019)의 발병으로 정확한 진단을 하기위한 X-ray 검사에 대한 수요가 증가하고 있다. 품질이 높은 수준의 Xray 영상을 얻기 위해서는 X-ray 튜브에 촬영 목적에 맞는 일정한 고전압을 제어를 통해 인가해야 한다. 그러기 위해서는 전력변환장치의 출력전압 특성을 고려하여 설계해야 한다. 따라서 Xray 발생장치에 주로 사용되는 Cockcroft-Walton Voltage Multiplier를 사용하여 다이오드의 기생커패시턴스 성분이 변압기의 누설 인덕턴스 성분, 회로의 기생 인덕턴스 성분과 공진현상을 일으켜 발생하는 출력전압의 특성 변화에 대한 시뮬레이션을 개발하고 분석 하였다.