• Cement Symposium
• /
• no.1
• /
• pp.18-22
• /
• 1973

A historical review of burning processes on cement manufacture has been made regarding specially to heat efficiency. In addition to these processes, two examples of stoichiometric calculation dealing with combustion such as air fuel ratio and excess air h

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.694-703
• /
• 2017

Many residents living near the cement factories are facing unpleasant odors. Thus, various efforts have been attempted to reduce the emission of odorous compounds from the cement manufacturing processes. This study focused on analysis of Acetaldehyde and their dispersion in vicinity of the residential area using theoretical calculation such as numerical simulation and dispersion model. The most significant odor species was acetaldehyde indicating 2 ppb at the test point, and the estimated concentration was similar to the value by Calpuff calculation. The modelling work revealed the emission source of the factory to influence the test site.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.391-396
• /
• 2004

Plastic shrinkage crack occurs at the exposed surfaces of freshly placed concrete due to consolidation of the concrete mass and rapid evaporation of water from the surface. This so-called shrinkage crack is a major concern for concrete, especially for flat structures such as pavements, slabs for industrial factories and retaining walls. This study has been performed to obtain the plastic shrinkage and the permeability of hydrophilic poly vinyl alcohol(PVA) fiber reinforced mortar and concrete. Test results indicated that PVA fiber reinforced cement composite showed an ability to reduce the total crack area and the maximum crack width (as compared to plain and polypropylene fiber reinforced concrete). Also, according to the permeability test result, it was found that PVA fiber reinforced cement composite was more reducing than polypropylene fiber reinforced cement composite.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.88-97
• /
• 2020

In this study, the selected waste plastic waste logistics used for cement sintering were classified into two types through the process of sorting and crushing, analyzing the characteristics of each, and analyzing the correlation of the strength after cement manufacturing. The experimental variables were classified into soft and hard waste plastic waste, and the correlations between calorific value, chlorine, and moisture were analyzed. In addition, some of each waste was selected and melted, and the basic characteristics were evaluated by analyzing the structure and calorific value. The results of the experiment showed that it was evaluated that it is suitable to obtain a heat source by separating soft waste plastic wastes and sintering them with materials having similar properties. As a result of examining the wastes by strength after cement manufacturing, it was analyzed that the use of hard plastics greatly contributes to the compressive strength on the 1st and 28th, and the use of soft plastics contributes to the compressive strength on the 28th. However, these characteristics are evaluated by collecting only a part of the waste, and since the deviation of the waste occurs, continuous management is required, and a follow-up study on the environmental problems caused by the use of waste is required.

• Cement Symposium
• /
• no.30
• /
• pp.49-62
• /
• 2003

• Cement Symposium
• /
• no.32
• /
• pp.41-48
• /
• 2005

• Cement Symposium
• /
• no.31
• /
• pp.121-130
• /
• 2004

• Cement Symposium
• /
• s.37
• /
• pp.195-203
• /
• 2010

• Cement Symposium
• /
• s.37
• /
• pp.68-74
• /
• 2010

• Cement Symposium
• /
• no.22
• /
• pp.42-46
• /
• 1994