• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.239-244
• /
• 2022

In this study, the key parameters affecting the deterioration of each track type were derived based on field inspections and laboratory tests. The existing track deterioration model was limited to the ballasted tracks, and the deterioration evaluation of concrete tracks was insufficient. In this study, the laboratory test was performed to evaluate the performance and condition of track components to derive the deterioration factors reflecting the characteristics of various track structures. In addition, through analysis of track maintenance history data, parameters affecting track deterioration and maintenance were derived. The key parameters for presenting a track deterioration model based on the track performance of ballasted and concrete tracks through field inspection, track maintenance history data analysis, and performance test of track components using on-site specimens were identified as track support stiffness, Ballast gravel, track settlement and Resilience pad were presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.191-203
• /
• 1992

This paper dealt with the statistical values including mean, standard deviation, variance and coefficient of variation for 14 soil parameters available of Lade's double work-hardening model in order to predict the behaviour of granular soil. 27 sets of all 14 parameters for Baekma river sand were determined by regression using raw data acquired from 12 isotropic compression tests and 9 triaxial compression tests with the variation of confining pressure of 1, 2, and $4kg/cm^2$ respectively 3 times performed during this study. The characteristics of each parameters were investigated. By determining the range of the upper and lower bound dependent on the increase and decrease of the standard deviation from mean value of parameters, sensitivity of all the parameters was scrutinized, by which in turn the influence of experimental error generated inevitably during tests on the determination of soil parameters was also examined.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.282-287
• /
• 2019

본 연구의 목적은 음파를 이용하는 유속계로부터 관측된 후방산란강도와 실측된 부유사농도의 상관관계를 해석하여, 두 인자 사이의 관련 매개변수를 정량적으로 산정하고 관계식을 도출하는데 있다. 이를 위해 층별 유속계인 Aquadopp Profiler를 사용하여 사질 퇴적물 및 고령토 부유퇴적물 관측센서 검보정 챔버 실험을 수행하였다. 두 인자의 상관관계는 선형회귀분석을 통해 해석하였으며 그 결과로 도출된 접합곡선의 기울기는 각각 안목 A1 이 2.065, 안목 A2가 1.576, 고령토시료일 때 2.588의 값을 갖는데 이러한 차이는 시료 특성으로 설명될 수 있다. 서로 다른 입경을 갖는 시료는 후방산란 민감도에 차이가 있으며 이러한 영향으로 두 시료에서 산정된 계수 값에 차이가 발생한다. 본 연구를 통하여 도출된 측정 결과들은 후방산란강도에 미치는 수층 부유입자들의 영향이 매우 큼을 잘 보여준다. 일반적으로 수층 부유입자는 저면 퇴적물이 부유된 것으로 간주될 수 있으며, 또한 저면 퇴적물은 각 해역별로 site-specific 하다고 할 수 있다.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.713-722
• /
• 2000

This study analysed error of measurement and reproducibility for particle size analysis by the laser diffraction spectrometer. Laser diffraction spectrometers has become a very important method of particle size analysis. This measuring method has the advantage of simple operation, good reproducibility and rapid analysis. A feeding and dispersing system have been developed, which allows mass throughputs between 0.1~23 g/min in flowing air and 1.4~35% in flowing liquid. It has been used as a feeder unit for wet and dry particle size analysis from diffraction patterns. Relevant parameters, such as particle shape, particle size, dispersion, flow rate, concentration were analysed for measuring error. And system parameters of instruments for measurement of dynamic processes, eg, measuring time, focal plane, injection pressure drop and dispersion effect by the ultrasonic and mixing of preliminary treatment, were also discussed.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.735-743
• /
• 2014

The rheological measurement of polypropylene (PP) has been performed using a rheometer, an intrinsic viscometer, and an MI machine to predict the molecular weight and the molecular weight distribution. Also, GPC has been used for the determination of the molecular structure. The distribution broadness parameter using modified Carreau model has been used to make the correlation between the rheological parameter and the molecular structure instead of the rheological PI (polydispersity index) which is determined from the cross of modulus from the dynamic oscillatory measurement. Even though the rheological PI is useful to determine the molecular weight distribution of the PP using controlled rheology, which has narrow and uniform molecular weight distribution, but not suitable to determine the molecular weight distribution of the PP made from direct polymerization which has broad and various molecular weight distribution. However the distribution broadness parameter which determined from the index of the shear thinning of the PP melt well predicts the molecular weight distribution of PP.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.6
• /
• pp.434-442
• /
• 2015

In this study, a series of deposition tests have been performed using an annular flume in order to estimate depositional parameter of natural sediments. The sediment of Masan Port has been collected for deposition tests, and total 18 deposition tests have been carried out on different bed shear stress respectively but with the same initial concentration. As the results, the minimum bed shear stress ${\tau}_{bmin}$, standard deviation ${\sigma}1$ and time scale parameter $({\tau}_b^*-1)_{50}$ are found to be $0.10N/m^2$, 0.54 and 0.87 respectively. Through comparing with results from previous studies for other sediments, the results of this study are shown to be good enough to verify.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1333-1337
• /
• 2005

본 연구는 강우로 인한 도시 배수구역에서의 유출량 및 수질을 예측하기 위하여 영산강 유역의 도시하천이며 합류식 배수계통을 갖는 용봉천을 대상으로 SWMM 모형을 적용하였다. SWMM 모형의 매개변수 최적화 및 검증자료로 사용하기 위하여 강우시 2회에 걸쳐 조사하였으며, 매회 시료 채취 주기는 강우유출이 발생하기 전부터 시작하여 첨두유출량이 발생때까지 $1\~2$시간 간격으로 채취한 후 강우 종료 후 유출량 변화가 없을 때까지 $9\~12$단계로 세분하여 유출량과 pH, DO, BOD, COD, SS, T-N, T-P의 농도를 측정하였다. 모형의 입력자료는 국립지리원의 지형도, 환경부의 환경지리정보, 농업과학기술원의 정밀토양도 등을 기초로 각 배수구역의 소유역을 분할하여 물리학적$\cdot$수리학적 매개변수에 해당하는 입력자료를 산출하였으며 그림1과 같다. 모형의 보정자료는 2004년 6월 17일에 실측한 자료를 이용하여 침투능 계수 및 축적계수와 지수, 쓸림계수를 보정하였고, 검증자료로는 2004년 7월 7일에 실측한 자료를 이용하여 검증자료로 사용하였다. SWMM 모델을 적용해서 강우유출에 의한 hydrograph와 pollutograph를 도출하여 부하량을 산정 하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.1
• /
• pp.49-58
• /
• 2003

The suction of unsaturated soil is one of the important variables to influence on volume change behavior. This research was performed to analyze the soil-water characteristic of decomposed granite soils in Chung Cheong area, and showed relationship with grain-size distribution. Empirical parameters a, n, m are main variables that can be used in the empirical equations in order to predict unsaturated soil. Decomposed granite soils is taken at 12 field, and redistributed due to a, n, m parameters. The result of Extractor test is showed that matric suction is effected by the grain-size distribution curve's left-right location, degree of an angle and fine contents of a soil.

• Geophysics and Geophysical Exploration
• /
• v.17 no.3
• /
• pp.121-128
• /
• 2014

As the permeability is an important parameter to characterize the ease with which a porous medium transmits fluids, it is usually obtained by fluid flow experiment using core samples. In order to measure the permeability, however, an experimental apparatus is required and it might take long measurement time, especially for tight samples. In this study, the relationship between permeability and porosity as well as drying rate has been investigated to predict the permeability without a series of measuring experiments. Porosity is measured by drying monitoring method, which measures weight variation continuously while drying surface-dried saturated sample, and drying rate is obtained from weight variation ratio with respect to the water saturation. The total of 6 Berea sandstone samples, which have a permeability range of 70 to 670 mD, were used in this work, and a new and empirical equation which could predict permeability of porous sandstone by using porosity and drying rate were obtained through regression analysis.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.47-58
• /
• 2018

Duncan & Chang(1970) proposed the Duncan-Chang model that a linear relation of transformed stress-strain plots was reconstituted from a nonlinear relation of stress-strain curve of triaxial compression test using hyperbolic theory so as to estimate an initial tangent modulus and ultimate deviator stress for the soil specimen. Although the transformed stress-strain plots show a linear relationship theoretically, they actually show a nonlinearity at both low and high values of strain of the test. This phenomenon indicates that the stress-strain curve is not a complete form of a hyperbola. So, if linear regression analyses for the transformed stress-strain plot are performed over a full range of strain of a test, error in the estimation of their linear equations is unavoidable depending on ranges of strain with non-linearity. In order to reduce such an error, a modified regression analysis method is proposed in this study, in which linear regression analyses for transformed stress-strain plots are performed over the entire range of strain except the range the non-linearity is shown around starting and ending of the test, and then the initial tangent modulus and ultimate deviator stresses are calculated. Isotropically consolidated-drained triaxial compression tests were performed on compacted weathered soil with a modified Proctor density to obtain their model parameters. The modified regression analyses for transformed stress-strain plots were performed and analyzed results are compared with results estimated by 2 points method (Duncan et al., 1980). As a result of analyses, initial tangent moduli are about 4.0% higher and ultimate deviator stresses are about 2.9% lower than those values estimated by Duncan's 2 points method.